2
votes
Oil Pressure Warning Light on Fiat Ducato
It could be any or a combination of all of those, so flushing, cleaning, new (quality or oem) filter etc is a good point to start.
I would make, or purchase, a tee and fit a pressure gauge temporarily ...
- 34.7k
2
votes
Accepted
2010 GMC Yukon Denali XL - Oil pressure sensor not functioning properly but no abnormal engine noises. Potential mechanical issue?
EDIT: Two things I didn't (but wanted to) point out in this answer -
The gauge sweep at key on should be normal. I believe GM does this so the gauge will re-calibrate every time the vehicle is ...
- 162k
2
votes
Can fuel dilution significantly lower oil pressure?
First, change the oil to new proper grade oil as soon as possible.
See if the problem is still there. I myself prefer changing oil at 5000 km no matter what the manufacturer says about the intervals ...
- 1,086
2
votes
Cable for my oil-pressure sensor?
It is highly unlikely you will find any modern car that will have a totally separate cable just for the oil pressure sensor. The engine will likely have a single harness that has all connections ...
- 25.5k
1
vote
Accepted
Oil Pressure Warning Light on Fiat Ducato
It seems to me the oil might not be returning to the pan quick enough, so after a bit of harder running, when you release the clutch and the RPMs drop, the oil pressure drops to the point where the ...
- 162k
1
vote
Rough idling, car stalling in cold, won't start at all after filled up with fuel?
I think your oil issue is coincidental - My money is on a faulty/dirty mass air flow sensor, or a leak in your intake assembly causing bad readings on the sensor.
Examine your intake assembly from ...
- 196
1
vote
Accepted
2014 Chevy Impala Oil Sensor Location (P055b Engine oil pressure sensor/switch B - circuit range/performance)
On the LKW engine P055B "Intake Camshaft Position Actuator Oil Pressure Sensor Performance" refers to the cylinder head oil pressure sensor. Circled in your picture. The engine oil pressure sensor is ...
- 10.7k
1
vote
Oil light flashes after changing to synthetic motor oil
Your engine requires API SL (ILSAC GF-3) oil with visc. SAE 10W-30 or SAE 5W-30 (in cold climates). Also, as soon as you did not mention, which is, however, quite obvious, you might have you oil ...
- 11
1
vote
Handling voltage range mismatch between electric oil pressure gauge and pressure sensor
I don't think there is a voltage mismatch. Both the sensor and the gauge appear to use a supply of 10-16 VDC. The mismatch is between the output of the sensor and the input of the gauge. The sensor is ...
- 14.5k
Only top scored, non community-wiki answers of a minimum length are eligible