What OBDII protocol does a 2014 Mitsubishi Outlander use?

Question

I was trying to help out a friend with an intermittent stalling issue, but the OBD Fusion app could not connect to it via my ELM327 Wi-Fi adapter.

The protocol setting was set to "Automatic", which I believe makes it try the following list of protocols:

• SAE J1850 PWM (41.6 Kbaud)
• SAE J1850 VPW (10.4 Kbaud)
• ISO 9141-2 (5 baud init, 10.4 Kbaud)
• ISO 14320-4 KWP (5 baud init, 10.4 Kbaud)
• ISO 14320-4 KWP (fast init, 10.4 Kbaud)
• ISO 15765-4 CAN (11 bit ID, 500 Kbaud)
• ISO 15765-4 CAN (29 bit ID, 500 Kbaud)
• ISO 15765-4 CAN (11 bit ID, 250 Kbaud)
• ISO 15765-4 CAN (29 bit ID, 250 Kbaud)
• SAE J1939 CAN (29 bit ID, 250 Kbaud)
• USER1 CAN (11 bit ID, 125 Kbaud)
• USER2 CAN (11 bit ID, 50 Kbaud)

So what protocol works with the 2014 Mitsubishi Outlander?

Answer 1

I'm assuming this is the gas and not the hybrid.

Engine = 2.0

Year = 2014

Fuel = Gas

Protocol = CAN 11Bit, 500 baud

Mode 1 = BE3FA813 9017A001 FE108040

Mode 2 = 7E3F8003 00162001 7E108040

Here's the link where I retrieved the info.

Based upon the link it looks like you would be connecting with

• ISO 15765-4 CAN (11 bit ID, 500 Kbaud)