I have a 2008 Range Rover HSE with 147,000 miles. I got a check engine light and the PID indicated catalytic converters in bank 2 were bad. I replaced the cats and then started getting P0171 and P0174 messages. I replaced the air filter and the MAF sensor and still getting the same messages.

The freeze frame info from the OBD scanner is as follows: Fuel System 1 CL Fuel System 2 CL Load % 47.8 ETC° 189.0 SHRTFT1 7.0 LONGFT1 12.5 SHRTFT2 -0.8 LONGFT2 10.2 MAP (inHg) 19.8 RPM 1322 VSS (MPH) 24 Spark ADVC° 33 IAT° 75 MAF (lb/min) 2.930 TP(%) 20.0 RUNTM (SEC) 157 EGR_PTC(%) 48.2 EGR_ERR (%) 0.0 EVAP_PCT (%) 36.1 FLI (%) 45.9 BARO (inHg) 29.2 VPWR (V) 13.964 Load_ABS (%) 42.7 EQ_RAT 0.961 TP_R (%) 8.2 AAT (°F) 54 TP_B (%) 36.1 APP_D (%) 28.6 APP_E (%) 28.2 TAC_PCT (%) 30.2

Can anyone tell me what to look for or what to replace at this point?

I have a 2008 Range Rover HSE with 147,000 miles. I got a check engine light and the PID indicated catalytic converters in bank 2 were bad. I replaced the cats and then started getting P0171 and P0174 messages. I replaced the air filter and the MAF sensor and still getting the same messages.

The freeze frame info from the OBD scanner is as follows:

  Fuel System 1 CL
  Fuel System 2 CL
  Load %    47.8
  ETC°         189.0
  SHRTFT1   7.0
  LONGFT1   12.5
  SHRTFT2   -0.8
  LONGFT2   10.2
  MAP (inHg)    19.8
  RPM           1322
  VSS (MPH) 24
  Spark ADVC°   33
  IAT°          75
  MAF (lb/min)  2.930
  TP(%)        20.0
  RUNTM (SEC)   157
  EGR_PTC(%)    48.2
  EGR_ERR (%)   0.0
  EVAP_PCT (%)  36.1
  FLI (%)   45.9
  BARO (inHg)   29.2
  VPWR (V)  13.964
  Load_ABS (%)  42.7
  EQ_RAT    0.961
  TP_R (%)  8.2
  AAT (°F)  54
  TP_B (%)  36.1
  APP_D (%) 28.6
  APP_E (%) 28.2
  TAC_PCT (%)   30.2

Can anyone tell me what to look for or what to replace at this point?