2

Rode it today ran fine. Come back home and I stalled it. 20 minutes later I turn the key to ride it again and nothing. I have no lights of any sort.

I did check the fuses and they seem ok. What else should I try?

Improve this question
2
  • 5
    This seems to be your first posting here. Welcome. I will say generally folks leave a bit more detail on what they've tried. Have you reviewed the electrical schematic for your bike? Do you have access to a multimeter? Check that same site to get the complete service manual for your bike. I'm guessing there is a guide in there that tells you what component is what on that diagram.
    – zipzit
    Commented Jun 1, 2016 at 6:25
  • 1
    Do you know where are all the fuses are? Did you test your battery?
    – DucatiKiller
    Commented Jun 1, 2016 at 21:35

1 Answer 1

Reset to default
3

Make sure to check all of the safety features that were included on the bike. Kickstand up, in neutral, clutch in, kill switch set to run, and key on.

Improve this answer
1
  • Charged the battery over the night and now the lights turn on and starts. Thanks pointing me in the right direction though
    – Chris Carlson
    Commented Jun 1, 2016 at 22:50

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .