Timeline for Small two-stroke engine runs poor
Current License: CC BY-SA 3.0
4 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jul 10, 2014 at 16:29 | comment | added | Pᴀᴜʟsᴛᴇʀ2♦ | @theUg .. If it isn't one thing, it's another :D All the kill switch does in is ground the magneto output so it doesn't put spart out to the plug. You could replicate this pretty easily. You could also substitute a momentary switch in place of the original and work just the same. | |
| Jul 10, 2014 at 16:26 | comment | added | theUg | I ended up buying the primer bulb, and taking apart and thoroughly cleaning the carburettor. The passages in it were restricted by the gunk coloured green from copper oxide, so I just wetted it with carb cleaner and cleared out with a piece of wire. After all that it started to work and I was able to use it. That is, until killswitch disintegrated. :D | |
| Jul 10, 2014 at 16:22 | vote | accept | theUg | ||
| Apr 11, 2014 at 11:57 | history | answered | Pᴀᴜʟsᴛᴇʀ2♦ | CC BY-SA 3.0 |