Skip to main content
text link
Source Link
Rick T
  • 103
  • 3

How can I test and find the polarity of an ignition coil (that's not connected to a car) using a multi-meter.

Just to let you know coils can have polarity when DC Voltage is placed on them. https://mossmotoring.com/coil-polarity/

img1

I have different high voltage coils I need to test for polarity not only an ignition coil. But I think I can use the same test to find the polarity of the ignition coil to check the polarity of the other coils.

Example of another coil I need to test for polarity. Boost Step Up Power Module High Voltage Generator Converter (I do know the polarity of the red and green input wires, it's the two red output wires I'm trying to find / test the polarities of.)

I found a video that says it outputs High Voltage DC but want to verify the polarity (If the video is correct about being high voltage DC) https://youtu.be/L9Aq3BlNq9k?t=881 ...

Data that's on the website.

DC 3V-6V Bis 400kV 400000V Boost Step Up Power Module High Voltage Generator Converter

Description:
Input voltage: DC 3 V to 6 V
Input current: 2 A - 5 A
High pressure type: the type of pulse current
Output voltage: 400000 v(Please pay attention to safety)
High pressure discharge distance between: 10 mm - 20 mm
The output high voltage wire length: 100 mm
Input power cord length: 100 mm (the red line is positive)
Wiring:
Red and green power connection red line:"+" green line "-"
output : the other side ,same color cable
Please notice:
The high-voltage module should avoid the use of electricity in high voltage no-load . (Power must be adjusted to a suitable distance to the high-voltage output line , battery capacity is proportional to the distance and the use of the high-pressure arc ( not a voltage as high as possible , you must provide enough current ) . Experimental test of the arc distance from short to long , Do not exceed the maximum arc distance electricity, energy can not be released due to high pressure , can easily damage the module. )
Work: intermittent , continuous work does not allow more than 1 minute and the output side does not allow shorting . Improper voltage and long working hours easily damaged module
Package included:
1 x DC 3v-6v to 400kV 400000V Boost Step-up Power Module High-voltage Generator

img2

How can I test and find the polarity of an ignition coil (that's not connected to a car) using a multi-meter.

Just to let you know coils can have polarity when DC Voltage is placed on them. https://mossmotoring.com/coil-polarity/

img1

I have different high voltage coils I need to test for polarity not only an ignition coil. But I think I can use the same test to find the polarity of the ignition coil to check the polarity of the other coils.

Example of another coil I need to test for polarity. Boost Step Up Power Module High Voltage Generator Converter (I do know the polarity of the red and green input wires, it's the two red output wires I'm trying to find / test the polarities of.)

Data that's on the website.

DC 3V-6V Bis 400kV 400000V Boost Step Up Power Module High Voltage Generator Converter

Description:
Input voltage: DC 3 V to 6 V
Input current: 2 A - 5 A
High pressure type: the type of pulse current
Output voltage: 400000 v(Please pay attention to safety)
High pressure discharge distance between: 10 mm - 20 mm
The output high voltage wire length: 100 mm
Input power cord length: 100 mm (the red line is positive)
Wiring:
Red and green power connection red line:"+" green line "-"
output : the other side ,same color cable
Please notice:
The high-voltage module should avoid the use of electricity in high voltage no-load . (Power must be adjusted to a suitable distance to the high-voltage output line , battery capacity is proportional to the distance and the use of the high-pressure arc ( not a voltage as high as possible , you must provide enough current ) . Experimental test of the arc distance from short to long , Do not exceed the maximum arc distance electricity, energy can not be released due to high pressure , can easily damage the module. )
Work: intermittent , continuous work does not allow more than 1 minute and the output side does not allow shorting . Improper voltage and long working hours easily damaged module
Package included:
1 x DC 3v-6v to 400kV 400000V Boost Step-up Power Module High-voltage Generator

img2

How can I test and find the polarity of an ignition coil (that's not connected to a car) using a multi-meter.

Just to let you know coils can have polarity when DC Voltage is placed on them. https://mossmotoring.com/coil-polarity/

img1

I have different high voltage coils I need to test for polarity not only an ignition coil. But I think I can use the same test to find the polarity of the ignition coil to check the polarity of the other coils.

Example of another coil I need to test for polarity. Boost Step Up Power Module High Voltage Generator Converter (I do know the polarity of the red and green input wires, it's the two red output wires I'm trying to find / test the polarities of.)

I found a video that says it outputs High Voltage DC but want to verify the polarity (If the video is correct about being high voltage DC) https://youtu.be/L9Aq3BlNq9k?t=881 ...

Data that's on the website.

DC 3V-6V Bis 400kV 400000V Boost Step Up Power Module High Voltage Generator Converter

Description:
Input voltage: DC 3 V to 6 V
Input current: 2 A - 5 A
High pressure type: the type of pulse current
Output voltage: 400000 v(Please pay attention to safety)
High pressure discharge distance between: 10 mm - 20 mm
The output high voltage wire length: 100 mm
Input power cord length: 100 mm (the red line is positive)
Wiring:
Red and green power connection red line:"+" green line "-"
output : the other side ,same color cable
Please notice:
The high-voltage module should avoid the use of electricity in high voltage no-load . (Power must be adjusted to a suitable distance to the high-voltage output line , battery capacity is proportional to the distance and the use of the high-pressure arc ( not a voltage as high as possible , you must provide enough current ) . Experimental test of the arc distance from short to long , Do not exceed the maximum arc distance electricity, energy can not be released due to high pressure , can easily damage the module. )
Work: intermittent , continuous work does not allow more than 1 minute and the output side does not allow shorting . Improper voltage and long working hours easily damaged module
Package included:
1 x DC 3v-6v to 400kV 400000V Boost Step-up Power Module High-voltage Generator

img2

added the data sheet
Source Link
Rick T
  • 103
  • 3

How can I test and find the polarity of an ignition coil (that's not connected to a car) using a multi-meter.

Just to let you know coils can have polarity when DC Voltage is placed on them. https://mossmotoring.com/coil-polarity/

img1

I have different high voltage coils I need to test for polarity not only an ignition coil. But I think I can use the same test to find the polarity of the ignition coil to check the polarity of the other coils.

Example of another coil I need to test for polarity. Boost Step Up Power Module High Voltage Generator Converter (I do know the polarity of the red and green input wires, it's the two red output wires I'm trying to find / test the polarities of.)

Data that's on the website.

DC 3V-6V Bis 400kV 400000V Boost Step Up Power Module High Voltage Generator Converter

Description:
Input voltage: DC 3 V to 6 V
Input current: 2 A - 5 A
High pressure type: the type of pulse current
Output voltage: 400000 v(Please pay attention to safety)
High pressure discharge distance between: 10 mm - 20 mm
The output high voltage wire length: 100 mm
Input power cord length: 100 mm (the red line is positive)
Wiring:
Red and green power connection red line:"+" green line "-"
output : the other side ,same color cable
Please notice:
The high-voltage module should avoid the use of electricity in high voltage no-load . (Power must be adjusted to a suitable distance to the high-voltage output line , battery capacity is proportional to the distance and the use of the high-pressure arc ( not a voltage as high as possible , you must provide enough current ) . Experimental test of the arc distance from short to long , Do not exceed the maximum arc distance electricity, energy can not be released due to high pressure , can easily damage the module. )
Work: intermittent , continuous work does not allow more than 1 minute and the output side does not allow shorting . Improper voltage and long working hours easily damaged module
Package included:
1 x DC 3v-6v to 400kV 400000V Boost Step-up Power Module High-voltage Generator

img2

How can I test and find the polarity of an ignition coil (that's not connected to a car) using a multi-meter.

Just to let you know coils can have polarity when DC Voltage is placed on them. https://mossmotoring.com/coil-polarity/

img1

I have different high voltage coils I need to test for polarity not only an ignition coil. But I think I can use the same test to find the polarity of the ignition coil to check the polarity of the other coils.

Example of another coil I need to test for polarity. Boost Step Up Power Module High Voltage Generator Converter (I do know the polarity of the red and green input wires, it's the two red output wires I'm trying to find / test the polarities of.)

img2

How can I test and find the polarity of an ignition coil (that's not connected to a car) using a multi-meter.

Just to let you know coils can have polarity when DC Voltage is placed on them. https://mossmotoring.com/coil-polarity/

img1

I have different high voltage coils I need to test for polarity not only an ignition coil. But I think I can use the same test to find the polarity of the ignition coil to check the polarity of the other coils.

Example of another coil I need to test for polarity. Boost Step Up Power Module High Voltage Generator Converter (I do know the polarity of the red and green input wires, it's the two red output wires I'm trying to find / test the polarities of.)

Data that's on the website.

DC 3V-6V Bis 400kV 400000V Boost Step Up Power Module High Voltage Generator Converter

Description:
Input voltage: DC 3 V to 6 V
Input current: 2 A - 5 A
High pressure type: the type of pulse current
Output voltage: 400000 v(Please pay attention to safety)
High pressure discharge distance between: 10 mm - 20 mm
The output high voltage wire length: 100 mm
Input power cord length: 100 mm (the red line is positive)
Wiring:
Red and green power connection red line:"+" green line "-"
output : the other side ,same color cable
Please notice:
The high-voltage module should avoid the use of electricity in high voltage no-load . (Power must be adjusted to a suitable distance to the high-voltage output line , battery capacity is proportional to the distance and the use of the high-pressure arc ( not a voltage as high as possible , you must provide enough current ) . Experimental test of the arc distance from short to long , Do not exceed the maximum arc distance electricity, energy can not be released due to high pressure , can easily damage the module. )
Work: intermittent , continuous work does not allow more than 1 minute and the output side does not allow shorting . Improper voltage and long working hours easily damaged module
Package included:
1 x DC 3v-6v to 400kV 400000V Boost Step-up Power Module High-voltage Generator

img2

text
Source Link
Rick T
  • 103
  • 3

How can I test and find the polarity of an ignition coil (that's not connected to a car) using a multi-meter.

Just to let you know coils can have polarity when DC Voltage is placed on them. https://mossmotoring.com/coil-polarity/

img1

I have different high voltage coils I need to test for polarity not only an ignition coil. But I think I can use the same test to find the polarity of the ignition coil to check the polarity of the other coils.

Example of another coil I need to test for polarity. Boost Step Up Power Module High Voltage Generator Converter (I do know the polarity of the red and green input wires, it's the two red output wires I'm trying to find / test the polarities of.)

img2

How can I test and find the polarity of an ignition coil (that's not connected to a car) using a multi-meter.

img1

I have different high voltage coils I need to test for polarity not only an ignition coil. But I think I can use the same test to find the polarity of the ignition coil to check the polarity of the other coils.

Example of another coil I need to test for polarity. Boost Step Up Power Module High Voltage Generator Converter (I do know the polarity of the red and green input wires, it's the two red output wires I'm trying to find / test the polarities of.)

img2

How can I test and find the polarity of an ignition coil (that's not connected to a car) using a multi-meter.

Just to let you know coils can have polarity when DC Voltage is placed on them. https://mossmotoring.com/coil-polarity/

img1

I have different high voltage coils I need to test for polarity not only an ignition coil. But I think I can use the same test to find the polarity of the ignition coil to check the polarity of the other coils.

Example of another coil I need to test for polarity. Boost Step Up Power Module High Voltage Generator Converter (I do know the polarity of the red and green input wires, it's the two red output wires I'm trying to find / test the polarities of.)

img2

Source Link
Rick T
  • 103
  • 3
Loading