Timeline for Camshaft sensor testing
Current License: CC BY-SA 3.0
5 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Feb 10, 2017 at 19:02 | comment | added | Chebhou | Is the power to the sensor supposed to be ave while signal only 5v ? | |
| Feb 10, 2017 at 19:01 | comment | added | Chebhou | Thank you for the help . as i said i have. Replaced the sensor. But still get the same error code . and to eliminate the sensor from the equation i removed the harness and kept pulling the signal wire to ground this is supposed to fool the ecu into activating the injectors but that didn't work which is making me believe the fault is on the ecu side | |
| Feb 10, 2017 at 18:51 | comment | added | Pᴀᴜʟsᴛᴇʀ2♦ | If you are not getting signal from the sensor, I'd think you'd want to start there in your diagnostics by changing it. If you are pretty sure it's bad (due to no signal), it would be the place I'd start. | |
| Feb 10, 2017 at 17:24 | comment | added | Chebhou | I did this test with no luck ( it has 3 leads - S + ) but what bothers me is the injectors are not responding to the bypass test of the sensor ! | |
| Feb 10, 2017 at 17:13 | history | answered | Pᴀᴜʟsᴛᴇʀ2♦ | CC BY-SA 3.0 |