Skip to main content
Motor Vehicle Maintenance & Repair

Return to Answer

added 3 characters in body
Source Link
Nick
Nick
  • 4.1k
  • 22
  • 43

The error code mentioned that hearheater part of the O2SO2 sensor is bad. So it is easy to just check it with ohm meter before changing it. You should read below 20 ohmOhms on this element. Two of the wires are for element and another two for sensor. Do not connect ohm meterOhmmeter to the sensor because you may damage it depending to your ohm meterOhmeter.

The error code mentioned that hear part of the O2S is bad. So it is easy to just check it with ohm meter before changing it. You should read below 20 ohm on this element. Two of the wires are for element and another two for sensor. Do not connect ohm meter to the sensor because you may damage it depending to your ohm meter.

The error code mentioned that heater part of the O2 sensor is bad. So it is easy to just check it with ohm meter before changing it. You should read below 20 Ohms on this element. Two of the wires are for element and another two for sensor. Do not connect Ohmmeter to the sensor because you may damage it depending to your Ohmeter.

Source Link
pirooz
pirooz
  • 11
  • 1

The error code mentioned that hear part of the O2S is bad. So it is easy to just check it with ohm meter before changing it. You should read below 20 ohm on this element. Two of the wires are for element and another two for sensor. Do not connect ohm meter to the sensor because you may damage it depending to your ohm meter.