Skip to main content
Martin's user avatar
Martin's user avatar
Martin's user avatar
Martin
  • Member for 8 years, 1 month
  • Last seen more than a month ago
  • Italy
44 votes
Accepted

Why do the brakes "freeze" the suspension?

17 votes

Should I accept this help in fixing a 1" hole in my radiator?

17 votes
Accepted

Avoiding the grease, dirt and oil from getting onto the skin and under the nails?

14 votes
Accepted

Is it ok to plug in battery backward to do compression test?

14 votes

"Fill nitrogen in tires" poster - are the claims credible or just hot air?

14 votes
Accepted

What are different anti-seize compounds used for?

14 votes
Accepted

What is this yellow powder on my exhaust manifold?

11 votes
Accepted

Is high engine load bad?

10 votes

Can I use a 15lbs torque wrench for 13lbs spark plug job

9 votes
Accepted

What to do if you don't know if you have DOT 3 or DOT in your brake lines?

9 votes

Can I confirm clutch slippage by shifting without disengaging the clutch (while stopped)?

9 votes

Do primary and secondary coil resistances correspond to number of windings?

9 votes
Accepted

Are DIY store bolts okay for critical components?

8 votes
Accepted

Lifting Support Under Panel BMW

8 votes

How to detach this connector?

7 votes
Accepted

What type of tool has more strength? CR-V (Chrome Vanadium) or those black color tools?

7 votes

How Do Parking Brakes Wear Out?

7 votes

Why is engine oil replaced more often than transmission fluid?

7 votes
Accepted

What is "seal saver"?

7 votes

Timing Belt need replacing? Unknown mileage

7 votes

What causes pink spark plugs?

7 votes
Accepted

Securing exhaust manifold studs?

6 votes
Accepted

Removing stubborn o2 sensor - danger of stripping thread?

6 votes
Accepted

What types of bits are needed to work on a modern car?

6 votes

Helicoil installed from other side?

6 votes
Accepted

BMW X5 E53 - Bord computer / AWD issues

6 votes

What can I do to keep a threaded bolt from falling out of its slot?

6 votes

1996 Chevy K1500 Silverado ZZ4 5.7L - Rough Idle, Plug Damage, Overheating, EGR

6 votes
Accepted

Emergency brake metal latch has snapped off, can it be re-soldered?

6 votes

Flat tire with sidewall damage, slashing or driving damage?

1
2 3 4 5
8