6
votes
Is car lift required to change '03 Hyundai Santa Fe timing belt?
I found this -
NOTE: Santa Fe – Due to limited space within the engine compartment it may be necessary to remove the engine from the vehicle or the gearbox mounting and left-hand side driveshaft to ...
6
votes
Is car lift required to change '03 Hyundai Santa Fe timing belt?
It depends on the car, but it's plausible that the best way to change the belt is to drop the engine. Even if dropping the engine isn't required, changing a timing belt on a modern car is often a very ...
3
votes
Accepted
Car making a loud "clunk" noise after it's been off and sitting?
When you park, the exhaust system is very hot, but it quickly begins to cool. As it does, the formerly hot components shrink relative to the car's body. I'd guess the exhaust pipe is slipping on ...
3
votes
Accepted
Why is it difficult to start Hyundais?
I'd suggest your question is subjective. I've owned several Hyundai vehicles and have never had that issue. And yes, I've needed to get them jumped before. My current vehicle, an '08 Azera Limited, ...
2
votes
Accepted
Hyundai Santa Fe 2004 3.5L Random Misfire hesitates when accelerating
The tach jumping around is likely a failing ignition failure (or misfire) sensor (IFS or IMS). It is located on top of the thermostat housing on the drivers side of the engine. The part is ~80 USD. It ...
2
votes
Accepted
What exactly does the brake switch wire output and is there an easier way to get to it?
It depends on how your 7-pin is hooked up, but it looks like there's two common situations:
If you just need to actuate the brake lights, it's probably far easier to tap into that wire at or near the ...
2
votes
Accepted
Garage door opener with Santa Fe XL
Chamberlain provides Homelink programming instructions for specific makes and models. Just go to https://bridge.chamberlain.com/
According to the site, you don't need any special bridge and Homelink ...
2
votes
Change vs Replace Engine Oil (HELP)
What's the difference?
Absolutely nothing.
More than likely if you are seeing this in two (or more) places in the manual, different people wrote it. Really, it's just semantics.
2
votes
Is car lift required to change '03 Hyundai Santa Fe timing belt?
I would get a second opinion. It could be a variety of things that cause the engine to stop. Many do not require the drastic step of dropping the engine. These would include checking battery ...
2
votes
Location of the fuel level sensor?
thanks for your input. Since my question, according to a video on youtube , the santafe 2007-2009 requires the rear 60/40 seat to be removed. the driverside has the fuel pump & sensor & the ...
1
vote
Please help! I found two R-134a temperature pressure charts online. For recharging a 2011 Hyundai Santa Fe, which one should I follow?
P/t charts can be confusing if unfamiliar with refrigeration fundamentals. Do not use the first p/t chart. Why it is posted from google search is a mystery. Google cannot verify all info and one must ...
1
vote
Hyundai Santa Fe limited 2016
It's probably "safe" since the tire width (235) has not been changed. But your speedometer and odometer will be off by quite a bit.
The 10% change in aspect ratio (55 minus 45) will amount in almost ...
1
vote
Speedometer Not Working
This sounds like a loose connector to the dash - check and make sure they are secure.
1
vote
Accepted
Hyundai Santa Fe 2012 - low beam of the headlights stopped working
Go to a car spares store. They'll spec the correct bulbs for your vehicle, and they'll also install them for you if it's a quiet day (and they'll know not to touch the bulbs, which would otherwise ...
1
vote
Hyundai Santa Fe 2012 - low beam of the headlights stopped working
Well, check the fuse box and test the fuses - fuses can fracture so that current won't flow but they still "look" good...
Also check the bulbs from both headlights, a multimeter is good for this but ...
1
vote
Sante Fe: what kind of cylinder does the clutch have
I like to search parts on RockAuto—eBay's search algorithm is only as good as the person entering the part's description into eBay. Searching for a 2007 Hyundai Santa Fe 2.7L V6 (there's also a 3.3 ...
1
vote
Accepted
Sante Fe: what kind of cylinder does the clutch have
A quick search on ebay shows both external and internal (to the bell-housing) type slave cylinders.
You will need to look at the vehicle and determine which you have.
I used this search string for ...
1
vote
Santa Fe Factory installed remote starter causing my new car to not start
Disconnected it it’s fixed thank you
1
vote
was anyone successful in getting rid of the gas smell in their 2009 santa fe?
Your mechanic needs to do an "Evaporative Emission System" test. This consists of visual inspection, plus putting pressurized smoke into the fuel system to attempt to find leaks.
Hyundai has a poor ...
1
vote
2002 santa fe problems please help
I would suggest that you need to check all the electrical connections and cables / wires as something seems to be loose or broken.
It may be relatively easy like a battery cable or difficult to find ...
1
vote
Putting fuel in my vehicle. Having trouble starting
Sounds a lot like what happened to my Corolla. It turned out to be a evaporative system issue. It ranges from a defective fuel cap to issues where system pressure is leaking and it is a real pain to ...
1
vote
Hundai P0430 DTC
Typically, modern cars have two O2 sensors (upstream and downstream) per bank. Your code indicates that you have at least two banks. I don't really believe your engine would have more than two banks, ...
1
vote
2005 Hyundai Santa Fe Won't Start
Crank and/or cam sensor will cause a crank no start scenario. Did you test for spark at the plug to verify it's actually firing? It sounds like it's not if it won't try to run with fuel put directly ...
1
vote
2009 Hyundai Sante Fe - gas smell in cabin after replacing fuel sending unit. has been repaired 4x's now
I had a 2002 Santa Fe and we were smelling gas whenever we filled up. Tried a new gas cap, checked the lines, nothing.
Eventually we checked the filler neck. On the 2002 there was a cover to 'protect'...
1
vote
Steering wheel locks up after screeching noise and air bubbles in power steering reservoir
Air bubbles in any flowing system is created by air being drawn in. Fluid in motion causes suction and a pin hole in a hose may be enough. Many cars get this from steering ram seal leaks not clearly ...
1
vote
Could a faulty fuel level sensor cause a vehicle to stall?
For anyone looking for an exact answer to this problem. The vehicle stalling is due to the throttle body. Get it cleaned and the stalling will stop. However the gas gauge issue you’re having is the ...
Only top scored, non community-wiki answers of a minimum length are eligible
Related Tags
santa-fe × 48hyundai × 44
starting × 5
fuel-system × 4
troubleshooting × 3
headlight × 3
power-steering × 3
evap × 3
noise × 2
stall × 2
leak × 2
misfire × 2
fob × 2
purge-solenoid × 2
no-crank-no-start × 2
engine × 1
electrical × 1
tires × 1
oil × 1
ac × 1
automatic-transmission × 1
clutch × 1
oil-change × 1
power × 1
gasoline × 1