According to page 165 of the owner's manual, there is a 20 amp fuse (F85) and a 30 amp replay (T31) required. These are located in the fuse box in the engine compartment.
On page 162 of the Owner's Manual, is figure 169, it shows the location of the fuse and the relay.
It sounds to me like your carburetor needs setup properly. It is likely that your idle speed at on-choke running isn't set high enough. It's also possible that your auto-choke isn't working at all.
One question, before attempting to start the car, do you depress the throttle pedal fully to the floor once to engage the cold start circuit?