3

possible vent hose issue As you are filling your tank the displaced gasses in the tank need to go somewhere. If you have a pinched vent hose it could fill slower or be difficult to fill. Check the neck to the tank as well as the ventilation system to ensure there are no obstructions preventing the movement of gasses or liquids entering or exiting the ...


2

The circuit is fairly complex. But you can probably narrow down your problem to the ambient light sensor on the dash. Or wiring from the body control module to the headlight switch. I'd assume that the BCM provides 5v to the AL sensor and when it detects light it sends ground to the BCM or vice versa. So when it's cold the contacts in the sensor mistakenly ...


1

If that hose is attached to the coolant reservoir for your radiator, the other hose that exits (enters) the coolant reservoir should be connected to your radiator at a point just above the sealing gasket of the cap. When the system is filled to the proper level, the fluid in the reservoir is likely to be reaching a mark on the side of the tank between "low" ...


Only top voted, non community-wiki answers of a minimum length are eligible