Skip to main content
6 votes
Accepted

What does the lever disk adjust?

These disks adjust the resting position of the hand levers, to accommodate different-sized hands and rider preference.
DavidRecallsMonica's user avatar
5 votes

How can I check if handlebars are straight?

Since your motorcycle has handlebars that are a single piece, remove them from the motorcycle and remove all accessories from them. Check for obvious signs of bending such as cracked paint or metal. ...
Eric Urban's user avatar
  • 1,286
3 votes
Accepted

Handlebar Internal Weight Bar too long, but is correct part

Looks like that split ring compresses when the weight bar is pushed in the handle bar which then keeps it in place. Have you tried tapping it in with a rubber mallet or something similar?
HandyHowie's user avatar
  • 25.4k
2 votes
Accepted

How bar ends helps in reducing handle bar vibrations on motorcycle?

Adding weight will change the resonant frequency of the handlebars, yes. But if the weight you added made that resonance closer to the problem frequency, then it can amplify them dramatically. It is ...
Rory Alsop's user avatar
  • 18.6k
2 votes

How can I check if handlebars are straight?

Find a flat surface Take all of the accessories off of you handlebars, strip them clean of any additional item. Set the handlebars on the flat surface. You should have 4 points of the handlebars that ...
DucatiKiller's user avatar
  • 32.9k
1 vote
Accepted

Are my motorcycle handlebars twisted?

A small fall will many times result only in scratches and dirt, but no mechanical damage. If you cannot see a misalignment, and you cannot feel a difference in the riding, then it's most likely the ...
DavidRecallsMonica's user avatar
1 vote

Why does my Honda Activa 4G handle vibrate a lot at low speed?

This is a rather general question. Without knowing anything about your riding style or habits, nor the conditions you ride in, or how you maintain your scooter, I am going to give you a couple things ...
CharlieRB's user avatar
  • 9,015
1 vote

Honda vfr 800 vtec 2011

Titanium M5 metric bolts have a torque specification of 25 inch pounds. Yes, you should use thread lock for all handlebar related bolts that are related to your safety as a rider. You can use the ...
DucatiKiller's user avatar
  • 32.9k

Only top scored, non community-wiki answers of a minimum length are eligible