Questions tagged [obd-ii]

On-Board Diagnostics-II (OBD-II). Questions usually involve scan tools, their use and their compatibility, as well as how to interpret Diagnostic Trouble Codes (DTCs).

Filter by
Sorted by
Tagged with
4
votes
1answer
4k views

Does OBD II pin 16 output is always 12 Volt?

Does OBD II pin 16 output is always 12 Volt? Is it possible to the voltage is altering when ignition on, like rising from 12 to 14 Volt? Or Voltage output of the buses, trailers, heavy duty vehicles ...
3
votes
1answer
1k views

Auto door lock does not work with automatic transmission shifting to and from “Park”

My Toyota Corolla 2014 Altis auto door lock has not been worked. I read Electric central door lock does not work with automatic transmission shifting to and from “Park” and also Toyota Corolla ...
6
votes
1answer
585 views

OBD Accessory External Power Supply

I recently purchased the Zubie Car Hotspot from Verizon that connects to the OBD port on a car. I have mine connected to the Tesla Model X, unfortunately I need the connection to remain always on but ...
3
votes
0answers
368 views

2005 Impala OBD2 not working right

I have a 2005 Chevrolet Impala (Base trim, 3.4L) and I recently purchased a cheap OBD2 Bluetooth reader. Unfortunately, Torque (Android app) isn't able to read data from this transmitter when ...
1
vote
1answer
2k views

How to detect Passenger Seatbelt Indicator using OBD2

I have trouble code information as below for B00D1 OBD Trouble Code which use to detect Passenger Seatbelt Indication. I am referring below links to get trouble code information: http://www....
7
votes
2answers
9k views

What's the Difference Between OBDII adapters and Toyota Mini VCI?

I've been researching Toyota diagnostic connectors, and ran across something called a Mini VCI adaptor meant for use with Toyota's TechStream software. The physical interface looks like a standard ...
4
votes
1answer
562 views

What kind of DLC did Toyota's have before switching to OBDII?

What kind of DLC did Toyota's have before switching to OBDII? What year did they switch to OBDII outside the United States?
2
votes
0answers
79 views

Translating raw CAN responses into meaningful min/max/value

http://www.scangauge.com/support/x-gauge/xgauges-for-cansf-vehicles/ This website lists data reported by certain sensors. Lets take an example: Gauge = Short Term Fuel Trim Bank 1 TXD = 07E00106 ...
1
vote
0answers
3k views

OBD-II Enhanced PIDs

I was looking at the Torque Pro app and in the section where there is a list of custom PIDs that can be used, one is a Transmission Temperature PID. But it is exactly same as Engine Coolant ...
3
votes
3answers
83 views

Auto determine the bluetooth device is OBD or not?

Current I am working on OBDII. While in bluetooth discovery to connect obd, How I determine which device is obd and which device is normal bluetooth device.Because I want auto connect my app with obd. ...
4
votes
1answer
67 views

Mode 06 approaching failure limit

In Mode 06 (OBD), one gets a current value, max value and a min value for every MID, TID supported. If the current value is out of the max/min range, that MID, TID is considered a 'Fail'. But there ...
5
votes
2answers
355 views

1989 Chevy Scottsdale 2500 HD 5.7 liter 350

I have just finished a body off restoration of my 1989 Chevrolet Scottsdale 2500 HD. My question, is there an OBDI or OBDII or do I need a adapter to scan it? Even if I rebuilt the engine and ...
3
votes
1answer
202 views

Interface tracking device with OBD II (or alternative sources of data)

I have recently been working on writing software for some very small tracking devices. I decided to take on an electronics engineer and start building some boards myself using a GPS/GPRS module. I ...
5
votes
3answers
6k views

Mode 02 - Freeze frame data use

I got some data on sending 0202 command (Mode $02, PID 02). It is the freeze frame data. I don't understand why does anyone need the data? Do anyone (including mechanics) ever open Freeze frame data? ...
3
votes
1answer
418 views

My 2005 Honda Accord with OBD codes: 0507 and 0011. Howto Troubleshoot

The check engine light came on very recently with two error codes being thrown. From this source, the following will cause 0507 P0507 HONDA - Idle Control System RPM Higher Than Expected A vacuum ...
8
votes
2answers
7k views

Is it Possible to Control Lights through OBD-II Port?

Is it possible to use a car's onboard diagnostic port to toggle the headlights, interior lights, or parking lights? If not through the OBD-II port, how would I go about remotely toggling the lights on ...
10
votes
3answers
1k views

How do I get to see my Mode 06 in OBDii

Mode 06 in OBD2 is good to get an insight of what faults the car might encounter in the future. But I am unable to find out what command should I send to get Mode 06 data. It has TID$01 CID$01, so how ...
0
votes
1answer
5k views

How can I calculate MPG using an OBD-II Device

OBD-II provide following readings Mass Air Flow (PID 0166) Fuel–Air commanded equivalence ratio (0144) Can these be used to calculate the actual fuel consumed? Is the output correct?
2
votes
1answer
1k views

Detect AC(on/off) and Window(open/close) of CAR using OBD

Is there any way to detect AC(air conditioner) and Window(open/close) using OBD? I am putting links below for the OBD reader but I am unable to find any way to detect the AC(air conditioner) and ...
4
votes
3answers
241 views

(Mandatory in the EU) CAN through OBD-II?

I know that in the US, since 2008 vehicles must have a CAN connection on the OBD-II plug, but what about Europe? Do vehicles have to add CAN to the OBD-II plug? Or is it possible to directly send ...
1
vote
1answer
2k views

Toyota Fortuner OBD2 protocol

I used an ELM 327 and Torque app in one of my friend's Toyota Fortuner (2012 model), but didn't get correct data. Rpm was nil, Air intake temperature was negative, Load was constant at 6.66667%. After ...
3
votes
0answers
3k views

Ford Focus 2008 Error code: P2585-61

I own a Ford Focus 2008 1.6 TDCI. Recently I filled the DPF Additive tank with EOLYS Fluid but I couldn't regenerate and reset the values that day, so I drove to my home. Following day, I went to ...
6
votes
1answer
39k views

Nitro OBD2 SCAM OR WORK? [closed]

I was looking into general car stuff like storage and lights the general stuff. I ran into a device called a "nitro OBD2" they have one to save fuel one to generate more power and stuff. Looking into ...
4
votes
1answer
1k views

What OBDII protocol does a 2014 Mitsubishi Outlander use?

I was trying to help out a friend with an intermittent stalling issue, but the OBD Fusion app could not connect to it via my ELM327 Wi-Fi adapter. The protocol setting was set to "Automatic", which I ...
3
votes
1answer
454 views

Need explanation on Commanded EGR and ethanol%

There are 2 PIDs listed in this Wiki page - Commanded EGR and ethanol%. I have tried getting the values from some cars but have not succeeded. I am curious to know what do these 2 PIDs mean? Can ...
6
votes
1answer
2k views

What does it mean when the ELM327 OBD2-reader gives two lines of info for 0100 request?

I have an ELM327-based OBD2 reader that I can issue commands to when connected to a car. I'm running this on a 2015 Acura RDX. When I issue the request 0100 to get supported mode 1 PIDs, I get the ...
7
votes
1answer
2k views

Erratic single fault code: P0420, P0440, P0446. Normal variance, or indicative of something deeper?

Working on diagnosing an evap/emission/fuel system problem on my Toyota 2003 Corolla. More on that in this question. On 3/2, I saw a mechanic use his handheld OBD to read a code P0420. On 3/12, ...
5
votes
1answer
906 views

2005 hyundai elantra error code p0501

So my 05 Hyundai Elantra has the check engine light on. I took it to the store & had them put the code reader on & it comes up with p0501 vehicle speed sensor performance. My question. . is ...
4
votes
1answer
1k views

obtaining Remaining Fuel Level from a 2004 VW Polo (Mk4)

If I have a 2004 VW Polo and this uses a K-Line Bus (I think), how can I retrieve the fuel Level in the tank if the information is not made available as part of one of the standard OBDII PIDs (I think ...
4
votes
1answer
424 views

What is SAE 0x15 Short Term Fuel Trim Bank 1 Sensor 2?

I was taking a look at a neighbor's car, and noticed this PID stuck at 99.22% This is in addition to the regular STFT PID 0x06 which is staying fairly close to zero most of the time. What is this ...
2
votes
3answers
715 views

Car OBD protocol?

I would like to connect OBD2 GPS device in my cars. OBD2 connector support limited OBD protocols. I can't find which protocols present in my cars. So i just want to know what protocol is present in my ...
6
votes
2answers
3k views

Is it possible to access multiple CAN buses through the OBD-II port?

As usual I apologize if this has been asked and answered somewhere. I try to only ask questions if I can't find an answer or a satisfactory answer. From my understanding the OBD-II port on vehicles ...
3
votes
1answer
312 views

Can we determine the Cleaning Requirement of Air Filter Using OBD

Many a times, the dealer guy says that the unclean air filter consumes more fuel as compared to clean. So, my question is, is this really related to air filter? If yes, can we determine the case using ...
7
votes
1answer
14k views

Is Torque App reliable to read O2 sensor data?

My 2006 Toyota Prius is throwing code P0420 and I used a cheap OBD-II reader with Torque App on Android to check if my O2 sensors are working or not. I tried the maintenance mode to just run the ...
2
votes
2answers
1k views

BMW E90: Professional Radio (Alpine CD73) USB Adapter won't work

I bought an USB Adapter which emulates a CD Charger. The port wasn't used yet. When I plugged my battery the Radio worked, but I couldn't find the CD charger /USB in my radio source menu. Do I have to ...
3
votes
2answers
713 views

Calculate current drain from the battery in a drive

Control module voltage is one of the OBD PID. It signifies the car battery voltage. Is there any way to calculate how much current is drawn in a drive (say 7 km from my office to home). The voltage ...
6
votes
1answer
9k views

Difference between fuel pressure and fuel rail pressure

In OBD PID wiki page, there are 2 PIDs listed: Fuel pressure and Fuel rail pressure. Are both of them the same? Can someone please give an elaborate explanation of it - What exactly are they ...
4
votes
1answer
1k views

Engine Temperature from OBD data

Engine Coolant temperature is obtained from OBD. But there is no PID to get engine temperature. Obviously, they are related, rather proportional I guess. But can there be a case where my engine is ...
3
votes
1answer
992 views

How to calculate Car “Distance Till Empty” without knowing the fuel level

I've Renault Duster RxZ. I would like to calculate the DTE(Distance till Empty) which is based on the "how much fuel the car has" and the "mileage of the car" ? Currently the OBD doesn't return ...
30
votes
2answers
45k views

Difference between OBDII and CAN

What is CAN (controller area network)? What are the differences between an OBD-II protocol and a CAN setup?` How do I use an OBD-II scanner on a vehicle with CAN?
4
votes
2answers
597 views

Stopping distance of a car

I want to calculate the stopping distance of a car from an OBD2 device. Say, I am driving at 30 kmph and apply my brakes hard. My car will skid and stop at a distance "x" meters from that point. This "...
4
votes
3answers
1k views

Can the throttle position be high during idle

I used an OBD to get data from one of my friend's car - Volkswagen Polo 1.5L Diesel. But the car was idling at around 900 rpm, while the throttle position I got was around 22%. How is it possible? As ...
9
votes
4answers
16k views

Disabling OBD2-Interface in a car

If a car-thief wants to steal a modern car, he often uses the OBD2 (On Board diagnosis) to "hack" the car. Simplified: He achieves this by plugging his "hacking device" in the port, which aquieres ...
3
votes
2answers
4k views

OBDII ELM 327 Bluetooth adapter - is it reliable? [closed]

I got myself such a bluetooth adapter for my car, because the display on the radio stopped working, and I wanted to see if it will show up any errors. There are even apps for Android that work with ...
11
votes
1answer
391 views

Are there any plans to update OBD-II?

OBD-II is ancient It predates the Porsche 911 GT1, Windows 95 and implementation of the Schengen Agreement. I would have thought that SAE would be working to add more diagnostic coverage for ...
9
votes
1answer
3k views

ATMA on OBDII not Working

I have successfully connected a terminal android app to the obd port of my car. And tried dry run of many at commands, many are working as expected. But ATMA (AT command to Monitor All) is not ...
2
votes
3answers
627 views

Wheel alignment from OBD parameters

Can I calculate wheel alignment from OBD parameters. Car is Hyundai i10, and it doesn't give any Steering Alignment/ Steering Position data. The only method to check the alignment is to let the car ...
17
votes
3answers
53k views

What is the motorcycle equivalent of OBD-II?

I once met an OBD-II expert while traveling and asked him if motorcycles (especially the fuel-injected ones) employ a similar protocol. He said that the use of such a protocol is not as widespread ...
4
votes
1answer
805 views

Calculating AFR using injector flow rate and mass air flow

Is injector flow rate = Mass fuel flow? If so then AFR = MAF/Injector flow rate. Can someone please confirm this?
1
vote
1answer
993 views

Auxiliary input status and Auxiliary input / output supported OBD2 PID

I want to know what does Auxiliary input status (PID 1E) and Auxiliary input / output supported (PID 65) OBD2 PID mean. Do they tell me whether my car is in the Aux mode (while I am listening to the ...