Questions tagged [body-work]

The process of fixing or refinishing portions of the body on a vehicle. This could include metal work (straightening or replacing) or paint finishing/re-finishing.

Filter by
Sorted by
Tagged with
15
votes
6answers
7k views

What to look out for when buying a car that hit a deer?

I'm looking at buying a car that is only 2 years old, has good miles, a price about a third lower than I would expect...but it had an accident listed on the CarFax. The previous owner hit a deer and ...
14
votes
5answers
38k views

Is sand blasting safe on old cars?

As the title says, when restoring a classic car I've been typically taught it was proper to get the entire vehicle sand blasted to see any issues and make any needed repairs them move to paint. ...
12
votes
2answers
4k views

How to Use Glue on Dent Puller Tabs

I just got a little dent pulling kit that uses glue on tabs: As can be seen, the tabs come in many shapes and sizes, and different surface textures; some have a ribbed surface, while others of a ...
11
votes
4answers
9k views

Large rust hole in spare tire area. (Completely rusted through) How to fix?

This is a beater car and I'm not worried about fixing it "properly" really. Trying to spend minimal dollars on this. My main concern is keeping rats or bugs out of the car. Basically the car ...
10
votes
3answers
2k views

Paint peeling around body filled area 6 months on

I sanded and filled a dent in my cars plastic/foam bumper, applied primer and factory matched auto paint. This worked and look fine for about 6 months. Today I noticed the paint around where the ...
10
votes
1answer
327 views

What can be used to protect the under-carriage of a hot rod?

With a sand blasted cab and bed I am looking for a solution to protect the metal body of a C10 hot rod on air ride. I have looked into possibly rhino lining the under side of the bed and cab but I ...
9
votes
11answers
247k views

Why did my clear coat turn out matte instead of glossy, and how can I fix it?

A while back I fixed up some rust spots on stone kicks on my hood, and ended up repainting my whole hood to cover them up after grinding/puttying/priming. I got custom matching spray paint made and ...
9
votes
5answers
53k views

Can I use spray paint to touch up my car?

I have several really small nicks and major scuffs on my car; the nicks from driving on the highway (flying debris hitting chassis) and the scuffs from two fender benders. The nicks have started to ...
8
votes
3answers
4k views

How might I fix a dent in a Honda Rebel fuel tank?

In a silly move during an engine overhaul, I dropped my Honda Rebel's fuel tank and put a dent in the top side. Is it possible to pull this dent out? I've heard there is a method using heat and ice ...
7
votes
1answer
20k views

Should I be worried about bumper reinforcement condition after being rear ended?

Recently a car rear ended me at about 10 mph. Cosmetic damage to my rear bumper is not that bad and because of that I am considering to let the other person get away without making claims to his ...
7
votes
1answer
1k views

DIY carbon-fiber parts layup

I'm gathering the necessary equipment to start my next little hobby project building my own fairings. I got about 5 yards of carbon-fiber/Kevlar and another 5 yards of fiberglass, 10ft of 3' carbon ...
7
votes
1answer
50k views

Paint is cracking and showing lines, like dried mud

4 years ago, after repainting my 1980 Chrysler LeBaron, I'm seeing many lines appear in the paint. These lines appear all over, but especially around corners, and much more on flat, upright facing ...
7
votes
1answer
162 views

Repairing some bodywork holes

A panel has come lose from my vw transporter t5 and on closer inspection its because of of the holes in the bodywork have flaired. Whats the best way to repair this? Should I just go at it with a ...
6
votes
4answers
2k views

To remove this type of "hard, metallicish" sticker?

My very lucky teen daughter just got a wonderful honest '08 Mustang GT; the black paint work is fair. One of the old dealers left this hideous sticker on it: It's one of "those" stickers - ...
6
votes
2answers
604 views

Welding sheetmetal

I'm looking at purchasing a 78 Chevrolet truck which has some modest rust which would most likely need to be taken care of via replacement sheetmetal and welding. I'm a decent welder (a little better ...
6
votes
1answer
4k views

Neighbor uses cans of spray paint on his car - can it travel to my car?

I have a crazy neighbor in my apartment complex that spray paints his car instead of washing it. I have a 2013 car with a nice paint job from factory when I bought it new. It has a nice clear shiny ...
6
votes
1answer
5k views

How can I get rid of door dings?

Wife parks too close to my white car. Would love to get rid of these door dings as her car is only 3 years old.
6
votes
1answer
108 views

Quick paint job now, or wait until I can do it right?

My question is similar this question but my focus is a little different. I have a 1982 Porsche 911 that has collected quite a number of chips and scratches on the front, mostly from rocks bouncing ...
6
votes
2answers
3k views

Turning back rust on frame welds on a FJ Cruiser

I recently purchased a 2007 FJ cruiser up here in the north where we use lots of salt. The only issue I noticed with this vehicle (and about half of the FJs I looked at) was rust developing along the ...
5
votes
4answers
2k views

How can I tell which body shop is better? Replacing or repairing parts with VIN numbers

I have a 7 month old car that was sideswiped when a driver drifted into my lane. It's a 2011 Ford Focus with a metallic gray exterior. It should all be covered by the other driver's Allstate policy. ...
5
votes
3answers
14k views

When buying a used car, how much to discount for cosmetic body damage/scrape [closed]

I'm trying to get a handle on used car pricing and the difference between clean and average. In my case I'm looking at a used VW Golf that looks like it has a scrape from a column in a parking garage....
5
votes
2answers
7k views

How to repair a cracked plastic bumper

My wife's brand new bumper cracked from some road debris (image): Body shop quoted her something ridiculous like $1100 (a $280 part plus a ton of labor, to replace the whole thing). I know there ...
5
votes
1answer
10k views

Are these signs of a bad body shop paint job?

A piece of debris gouged my hood in a windstorm. I went through insurance and had the repair done at their recommended shop, which I suspect was a mistake. The car is red metallic, and I can see the ...
5
votes
1answer
2k views

What is the best way to prevent rust when cutting in your car's body?

For example, I want to cut a hole in the car's front left fender, to fit a snorkel. What is the best way to prevent rusting on the exposed metal on the edge of the cut?
5
votes
1answer
182 views

How to ensure body repair parts will fit?

How can you ensure, when you are purchasing body parts online or from a vendor, that the parts you get are going to be an exact fit for your vehicle? I’ve heard horror stories of body parts not lining ...
5
votes
2answers
3k views

3 Questions related to fixing/replacing 2005 Toyota Prius bumpers?

I have a large crack on the left rear corner of my white '05 Prius bumper from when my wife bumped into a another car in a parking lot when the temperature was around 4 below. I also have a large ...
5
votes
2answers
2k views

Hit by a bus - can I use a dent puller to fix this?

It turns out that two vehicles shouldn't occupy the same space at the same time :( Thankfully the damage is superficial. As the local dealership is notorious for its long body shop waiting list, I ...
4
votes
1answer
1k views

What are the struts connecting the roof to the rest of the car called?

I need to have some work done on the part of the body that connects the roof to the rest of the car, and I'm wondering what is that piece of the car called? If it matters, I'm specifically wondering ...
4
votes
2answers
682 views

What does bondo outgas?

Does anybody know the gas that Bondo outgasses when drying? A neighbour is sensitive to certain gasses and he needs to know if he will be affected by Bondo. Thanks.
4
votes
1answer
790 views

Collision repair with Bondo and used parts

This year, one of my New Year's resolutions was to become more of a DIYer. I was in a fender bender a few weeks back (not my fault) and insurance just cut me a check for the repairs. This car is a ...
4
votes
4answers
4k views

Do these dents warrant replacing the doors altogether?

Thanks to a deer, a friend got some dents in her driver's side doors and a crack in her bumper just under the headlight. A local mechanic said the doors and bumper will have to be replaced altogether ...
4
votes
2answers
2k views

Minor body rust sanding and repair

I had a minor accident a little over a year ago, the damage from which I did not immediately repair so a paint scratch has corroded over time. Finally, I'm getting the time to fix it. My questions ...
4
votes
2answers
174 views

Sedan car door modified - inspection issues

I am interested in buying a car where the seller modified the car door into Lamborghini-like butterfly doors. Will there be safety issues, so that the mod will not pass state inspection? Let's ...
4
votes
1answer
68 views

Body kit attached with some kind of rubbery adhesive. Anyway to detach it safely?

My Mk1 Golf Cabriolet has a factory fitted body kit (the 'Clipper' kit). There are some scratches on one of the wheel arches and I thought it would be easier to remove them to re-paint but there seems ...
4
votes
1answer
82 views

Non-destructive cost-efficient method for measuring state of rustedness of a vehicle

Besides visual examination, is there some way to find out reliably how much a given car is affected by rust? I mean, which parts (possibly covered by paint) are rusting in the inside, and to what ...
4
votes
1answer
2k views

How do I treat aluminium oxidation on body panels?

Like most of us I have dealt with steel rust on many occasions, but how should I deal with aluminium corrosion bubbles under the paint? I have just bought my first aluminium car, which are becoming a ...
3
votes
5answers
3k views

Plastic damage from throttle body/carb cleaner

I didn't realize carb cleaner was so damaging to plastic and unfortunately left marks on my car's plastic grill. Notice how the matte-ish black plastic looks shiny like water was spilled on it, but it ...
3
votes
4answers
6k views

How much of a difference will a splitter / diffuser would be on a FWD car?

Out of curiosity, if you can get your hands on a properly engineered splitter, what kind of handling difference would I see? Any recommendations for a splitter that's not just for show? Any effects ...
3
votes
2answers
2k views

OEM vs. after-market bumper repair: is there a difference in quality?

Another vehicle hit mine, and the offending driver has offered to pay for repairs and a rental vehicle. That said, he is being cheap about using OEM vs. after-market parts. I have noticed that after-...
3
votes
2answers
68 views

Fixing cracked door trim piece?

What's the best way to fix this? Is there some specific adhesive that is going to hold up well on that type of plastic? It's a 1st gen Acura TSX, and the seatbelt got stuck when closing the door ...
3
votes
2answers
1k views

How to remove edges around body filler/bondo?

I have a curved area on fibreglass with a dent in it. I have filled it with body filler but when I sand it back there is still an obvious ridge where the filler meets the body. I have sanded it down ...
3
votes
2answers
98 views

Body spot welds all let go - what's going on?

2004 Nissan. Have been feeling like the hood and front part of the body (i.e. fenders) really move around a lot when off pavement (washboard logging roads, etc). Feels like the whole truck was ...
3
votes
3answers
19k views

How serious if corrosion on the inner sill of a Ford Focus?

I realise that can't be answered without me saying how serious the corrosion is. The context is that I'm looking at a 2004 Ford Focus on eBay and the MOT history on the DVLA web site reports an ...
3
votes
2answers
1k views

choosing between the many ways to fill exterior trim holes

Deleting exterior trim mounting holes on a car body means bodywork and paint. Before that happens, there are at least five possibilities, and probably more, for how the holes can actually be filled: ...
3
votes
1answer
1k views

Does body side molding damage the paint?

I just got a new 2016 RAV4. I'm thinking about getting a body side molding to protect it from door dings. They will install it right in the Toyota dealership I have three questions: 1. In general:...
3
votes
1answer
66 views

Metalwork: How can I maintain a curve during the planishing process?

I am new to metalworking, am teaching myself and am practicing making a motorcycle fender. I have managed to get a nice double curve in the sheet metal. However, this diminishes when I try to reduce ...
3
votes
2answers
190 views

Consequences of not fixing rusted body parts

My mother-in-law has just retired and given us her old Pontiac Sunfire 1996. It's been little used and generally well maintained, except for the body. Both front fenders have a small patch of about ...
3
votes
2answers
151 views

Why do we continue to paint cars with plastics?

Why do we continue to paint cars with oil based compounds; plastics, solvents, resins, etc? It's surely the least (or at least, not the most) efficient method for preserving ferrous metals. Just +10....
3
votes
1answer
1k views

Cheap diagnosis/repair of damaged fairing

There are already a number of answers regarding ways to fix small scratches in bodywork, but I'm not sure of the exact "nature" of the damage to the fairing of my motorbike: It's not my bike, though I ...
3
votes
1answer
742 views

is a visible paint seam on the roof-top ok?

Someone with a provisional licence hit my 2008 Jetta on the side, and the side of my car had to be reshaped and repainted. It involved repainting the whole side, including the strip on top of the ...