How to detach this connector?

Question

Can any of you kindly let me know what Connectors this is and how to remove it ?

I have to remove this connector in order to Access my Throttle body below the engine hood.

Please find the pictures of the underside of the connector.

It Says Delphi PA66-GF30

Kia Picanto 2018 Model.

It is not what connector it is but how to take it apart. Can’t be sure as none of your images show - but there will be a clip to lift or press then pull the connector off. Do NOT pull on the wires. — Solar Mike, Commented Sep 13, 2021 at 10:24
In the first picture you can see a slot in the top of the corrector and a T-shaped thing in the slot. Press down hard on the T (e.g. with a screwdriver) and pull the connector over it. When you refit the connector it will click into place to lock it. — alephzero, Commented Sep 13, 2021 at 11:14
@alephzero - That's an alignment notch, not a latch. The latch will be on the underside. — Pᴀᴜʟsᴛᴇʀ2, Commented Sep 13, 2021 at 11:48

Martin · Accepted Answer · 2021-09-13 12:10:18Z

8

Push or pull the gray thingy.

The connector should then unlock.

answered Sep 13, 2021 at 12:10

Martin

8,4883 gold badges27 silver badges41 bronze badges

Please find the pictures of the underside of the connector. ibb.co/CQ1CnS4 ibb.co/mC4vbgY ibb.co/qL8x38G It Says Delphi PA66-GF30
– Darious Stone
Commented Sep 15, 2021 at 4:27
OK, nice pics. Did you try the "gray thingy"?
– mike65535
Commented Sep 16, 2021 at 12:53

Add a comment |

1 Answer 1