1

Can someone tell me what components these are? The rubber hoses on them are cracking and I'd like to try and get OEM since there are 90° bends in the hoses. Also, I'm genuinely curious as to what system it's attached to. Does it have to do with the EGR?

It's on a 1995 F150 with the 5.8L 351W

Thanks in advance for the assistance!

enter image description here

enter image description here

Improve this question
1

The part you have circled in the first image is the Vapor Canister Purge Valve / Solenoid:

enter image description here

I found it here on RockAuto.com (NOTE: I have no affiliation with RockAuto, just showing the information).

This is an emissions part, but is separate from the EGR. It should be plumbed from the fuel tank (or charcoal canister) to the intake manifold.

Improve this answer
6
  • That helps immensely. Now I know what hoses to search for! – Allan Jun 20 '20 at 23:18
  • @Allan - While I get going OEM on it, you should be able to use some fuel line of the same inside diameter to do the job. The length of the tube is way more than long enough to do the 90° transition. I'd bet the cost of regular ole fuel line would be a lot cheaper than buying OEM from Ford. – Pᴀᴜʟsᴛᴇʀ2♦ Jun 20 '20 at 23:25
  • True, but there's also that short piece in the second pic. – Allan Jun 20 '20 at 23:33
  • I was able to get an after market "hard plastic elbow" specifically for vacuum lines as well as some quality vacuum hose and ended up making (IMO) a better than OEM 90° fitting. The problem was that it was two different sizes on each end. What the Ford engineers were thinking when they came up with that design, I'll never know. – Allan Jul 19 '20 at 23:49
  • @Allan ... doesn't surprise me one little bit. Glad you were able to get get it fixed. – Pᴀᴜʟsᴛᴇʀ2♦ Jul 20 '20 at 0:04

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.