I bought a pair of side marker lamps for my car (OEM p/n 26160-JK00B). They are compatible with Nissan MO/Infinity. Front view Connector view enter image description here

My car is a Nissan Murano 2009 (US model) which doesn't come by default with these flashers so I have to install them by myself.

The original headlamp harness doesn't come with connectors for these side marker lamps so I have to wire myself this thing (a wire extension from the front headlight - the turn lamp - to this side marker lamp).

But the question is: what connector should I buy/use in order to connect this lamp properly? Of course I can crimp two female spade connectors and then to hook them to the lamp but I would opt for a waterproof connector that fits, if possible.

Maybe someone, a handy auto electrician - anyone, has a clue about what could possible fit into that socket.

  • 1
    Cut one off a junkyard car.
    – geoO
    May 9, 2015 at 17:45

2 Answers 2


You will be able to get the pigtail from the dealer. It's the connector and about 12 inches of wire. They are used to repair harnesses.


Lol, I had forgot about this post :-) I figured out finally what connector I needed: Z03FBR manufactured by Mitsubishi. I was able to find them in Japan at this seller: http://www.best-sys.com/products/detail.php?product_id=92

The website is only in Japanese so knowing little bit of kanji would help :-)

So I bought the parts separately (the female, the male, the housing) then I just used some wire I already had at home and I manufactured the whole assembly myself.

PS: they could be found probably at any Nissan dealer in US (eg. courtesyparts.com)

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .