I have a CANLogger 2000 and the correct supplier supplied ODB-II CANBus to 9 pin D-type cable. (http://www.csselectronics.com/screen/product/can-bus-logger-canlogger2000/language/en)
The CANLogger has 8GB internal memory, I have connected the device to my car (AUDI A5 2012) and the module lights up as it should with the green LED illuminated.
I originally had a problem with the device trying to auto detect the bitrate and failing, so I edited the CONFIG.INI and set the bit rate manually to 500000 which according to AUDI is the correct bit rate for the car.
However I do not see any activity logged and I'm not sure if this is why the module was unable to detect the bit rate.
I don't know if its as simple as connecting the module to the car and it will start logging or if data is available on the connector?
Does anyone have experience with sniffing the CANbus on an AUDI ?