11

I had the gearbox mount break in my Mk2 Citroen Saxo (one of three mounts holding the engine, gearbox etc up). The engine fell down due to the lack of mount, and the gearbox hit the floor (and cracked).

I will, of course, be replacing the gearbox and the gearbox mount, but should I replace the other engine mounts? I am concerned about the stress that may have been placed on them.

13

In the same way that you don't technically "need" to replace tyres or shock absorbers in pairs, I would suggest it best practice to replace the other mounts. If one has worn to the point of failure, it will be presumably the same age as the others. Plus the rather dramatic failure plus the extra stress placed on the other mounts leading up to the failure, the other mounts in the car are likely to not be in the best state.

You could, if your goal was to simply make the car drive again for the lowest possible cost, replace just the failed mount. However, if it were mine, I'd replace the others at the same time or as soon as affordable to do so as a sensible precaution.

  • 2
    Thanks. I will replace the others as they are fairly cheap and I'll have the engine lifted up anyway to replace the gearbox. – James Monger Jan 30 '17 at 12:55
  • 4
    @JamesMonger to extend this a bit, while the engine is up you should examine it, clean it (degrease) and examine it again. What else can you do while its out? – Criggie Jan 30 '17 at 19:33
4

You don't NEED to, but be aware that the other mounts tend to wear more quickly after 1 has been replaced. If you don't replace the others, keep an eye on them.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.