0100 (https://en.wikipedia.org/wiki/OBD-II_PIDs#Mode_1_PID_00) should provide 4 bytes of data. But there has been cases, like Audi A4 2.0 TDI, where the data from 0100 was less than 4 bytes. So is the data garbage? Or the data might contain zero(s) at the beginning of the string which has been omitted when sent from the ELM 327 OBD adaptor?
Asked
Viewed
50 times
3
-
Do you have a raw dump of the data that you could share with us? Are you streaming the data in binary mode? – Zaid Dec 23 '16 at 16:04
