I own a 2011 Yamaha FZ 16 bike; which has an open chain; occasionally dirt gets accumulated to the chain and despite my many attempts I am unable to properly clean the chain.

Also could you also help me on how to lubricate the chain of the bike.

  • As for the chain lubrication, buy a (spray) can of good chain lube and apply a layer to the inside of the chain (i.e., the side of the chain that has direct contact with the two sprockets.) This is easily done with a helper pushing the bike forward and you lubricating (or, if you have a stand, use that). (random video illustrating chain lubrication)
    – jensgram
    May 16, 2012 at 10:34

1 Answer 1

  • put the bike up on a rear stand
  • clean the chain - use a degreaser designed for the purpose and a stiff nylon brush, wash a few bits at a time spinning the wheel to access more portions of the chain
  • rinse off the degreaser
  • use a water repellent to get rid of the water
  • dry off with a rag
  • use a good quality chain lube in a spray (there are different types based on the conditions you ride in i.e. wet, hot, cold, sandy/dusty)
  • wipe off excess with a clean rag

I found my chain to be substanstially cleaner and require less maintenance once I fitted a scottoiler (other chain oilers are available) than when I didnt.


Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.