2

The glass cover of one of the fog lights has broken on my car. I thought changing it couldn't be too hard a job and so I already have a whole fog light part to replace it myself. The Haynes Manual I have suggests there are to different styles of Fiesta fog light access that require it to be changed 2 different ways, either pop off the plastic panel and change it, or unscrew a screw pop off the panel and change it.

Now, the problem is... My Fiesta isn't either of those!!

From what I have deduced I can only work out I have to take off the entire front bumper to access the fog light. Is this right or am I missing something?

If necessary I could take a picture of where the fog light resides if it would aide anyone in knowing how to replace the fog light on my Fiesta?

Improve this question
5
  • @Mark Johnson It is a UK Ford Fiesta, 05 plate (2005) 1.4 diesel, GHIA. The Hyanes Manual is for years 2002-2008.
    – CurtisJC
    Apr 26, 2012 at 12:44
  • On some vehicles you need to remove the headlamp to get at the fog light. I'm not familiar with Fiestas, but it may be worth a try.
    – Tim
    Apr 27, 2012 at 13:20
  • @Tim I'll try that tomorrow while it's light (and hopefully not raining!).
    – CurtisJC
    Apr 28, 2012 at 20:56
  • @Tim removing the headlight provided access to thru fog light
    – CurtisJC
    Apr 29, 2012 at 13:33
  • Awesome, I turned the comment into an answer if you want to mark this question as answered.
    – Tim
    Apr 30, 2012 at 13:52

2 Answers 2

Reset to default
1

It looks like on some Fiestas you need to remove the headlamp to access the fog light. http://www.fordownersclub.com/forums/topic/31017-new-fog-lights/

Improve this answer
0

U can access the spot lights in the front bumper from the bottom, u don't need to take anything else off.... go under the front of the car ull see them couple of screws and there done!!

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .