I have a Motorcraft 2150 carb which has some pretty bad pitting on the main body. The pitting caused like two small holes and is causing fuel to slowly drip. I can only see the holes from the outside of the body and I'm not sure where it's leaking from on the inside...
There is also a hole on the bottom that looks like it was filled with jbweld or something, but the jbweld must've deteriorated when I rebuilt it (it's the picture with the throttle plates and power valve).
Are these safe to use jbweld on or something similar? What would be the best option, aside from replacing the entire carb?
Here are the pictures: http://imgur.com/a/UHq8R