2

I'm trying to sell my old alloy wheels, and I need to know a few crucial sizes (like the bolt diameter and width) to put up an ad. Unfortunately I cannot make heads or tails of these numbers. Here's all that I found written on them:

C24B6
LK 108
M 0926 A J
7.0JX16H2 A706
MIC ZCW
ET 45 X P

What I do know about them is that they are 16" in diameter and had 205/55R16 tires on them beforehand. They also use 5 bolts (nuts? logs? not sure on the difference - I'm not a native English speaker)

I've been trying to google, but to no avail. I also made pictures of them and all of the markings are visible there (at least in the full-sized originals). If you wish, you can look at them here.

  • Do you know what car they were on? – Move More Comments Link To Top Oct 16 '11 at 21:52
  • My own Volvo S60, year 2004 edition. However I'm not sure if I shouldn't delete the question now, since I already sold them. :P But perhaps the explanation might be of use to someone else. That is, if there is something to explain at all, and all these characters aren't manufacturer-specific. – Vilx- Oct 17 '11 at 7:56
  • Oh, but they aren't original Volvo disks. Judging by the pictures I'd say it's a safe guess that they were made by Autec. – Vilx- Oct 17 '11 at 8:00
2

I don't know all of those, but the key ones are:

108 will be the PCD (pitch circle diameter - the distance between the bolt holes).

7.0Jx16 will be the size - 7" wide by 16" diameter. H2 means it is of a double hump design.

ET 45 X P will be the offset - how far in or out the wheel sits in relation toh the hub. In this case it will be 45mm, and I'd expect the P to be positive, i.e. the wheel is inset towards the centre of the car.

This Page on the car bibles website explains it in much more detail than I can.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.