I have a '07 Chevy Malibu and would like to know how to program the key. I lost the original, but was able to get a spare from the dealership. I do not want to pay the locksmith $150 to program the key. What is the procedure for doing this?
Here it the procedure for 're-learning' the master key for my Chevy Malibu. I assume that most Chevy's that have a transponder work this way well:
With an unlearned master vehicle key, turn ON the ignition, but not the engine:
Wait for roughly 10 minutes (mine was slightly longer) for the 'security indicator' to turn off:
Turn the ignition completely OFF and wait for roughly 5 seconds
Repeat steps 1-3 for two more times for a total of 3 cycles (roughly 30 minutes)
- NOTE: it is important to complete all steps of the third cycle, especially step three, as this is how the vehicle learns the key transponder information. In other words, before starting the car, you must turn off the ignition and wait 5 seconds first
With the key you just programmed, turn the key and start the car. The key is now operable on the car.
WARNING: all other keys you may have previously had will no longer work, and must be re-programmed as well.
In order to reprogram additional keys:
- Take the master vehicle key that is already programmed, and turn the ignition to ON (with engine OFF)
- Watch the 'security indicator' until it's solid
- Turn the ignition off and quickly replace the key you wish to program
- Turn the ignition to ON (engine OFF) and wait until the 'security indicator' turns solid
- The Key is now programmed and should now start the car
protected by Move More Comments Link To Top Aug 25 '13 at 5:44
Thank you for your interest in this question.
Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).
Would you like to answer one of these unanswered questions instead?