0

I disconnected the battery cable on a 1997 Nissan XE, 2.4 -5 speed truck to put on a new cable end because it was corroded, when I reconnected it all the idiot lights on the dash were off, the AC fan & alternator was not working. The headlight, wipers, radio. and the starter & engine all worked. When I used the factory cable end again they all did come back a couple of times, but the last time they didn't. I even bought a Diagnostic scan tool but it also wouldn't work. How can I reset or somehow fix everything? Also the "Shift Lock" fuse blew & was replaced every time. All the other fuses are good. Thanks...

Improve this question
3
  • Welcome to Motor Vehicle Maintenance & Repair! I would bet you've got a connection issue, either at the battery or where the cables connect at the other end. You might want to see if there is corrosion anywhere on opposite end, as well as ensuring the connections are correctly tightened.
    – Pᴀᴜʟsᴛᴇʀ2 ♦
    Nov 27, 2019 at 20:57
  • Curious if you see the lights come on and off if you wiggle the battery cables a bit
    – Chris
    Nov 27, 2019 at 23:29
  • Headlights, radio, starter, fuel pump, wipers, all work & engine runs. All warning lamps on dash, AC fan, alternator, tail lights & brake lights don't work. Thinking maybe a fusible link or something like that?
    – Stephen Botel
    Nov 29, 2019 at 13:05

0

Reset to default

You must log in to answer this question.

Browse other questions tagged .