Reputation
202
Top tag
Next privilege 250 Rep.
View close votes
Badges
1 7
Newest
 Yearling
Impact
~4k people reached

  • 0 posts edited
  • 0 helpful flags
  • 6 votes cast
Jun
1
awarded  Yearling
Jun
1
accepted Replacing Cam Position Sensor; any gotchas?
May
28
comment Replacing Cam Position Sensor; any gotchas?
So the design of the sensors is usually such that installation is essentially as simple as plug and play. That is good to know, thanks. From what I've seen online the sensors aren't too expensive, so I thought maybe I should just do them both while I was in there (presuming them to both be about the same age), but from the answers, it sounds like that isn't really necessary for these particular parts.
May
28
comment Replacing Cam Position Sensor; any gotchas?
The car is sputtering a little bit, and does have trouble turning over occasionally, which reading indicates are typical faulty cps symptoms. I had just had the car in for some other work (ignition coils), so it had occurred that maybe the computer was just a little confused. I cleared the code to see, and it did come back after about a week.
May
28
comment Replacing Cam Position Sensor; any gotchas?
No, they're different unfortunately..
May
27
asked Replacing Cam Position Sensor; any gotchas?
Mar
7
awarded  Popular Question
Jul
26
comment Can I easily replace the Throttle Position Sensor on a 1999 Maxima?
Thanks for the info; good to know. Unfortunately my car is still old enough that it has an adjustable TPS, so since I need to bring the car in anyway, I'm going to have them deal with this also, instead of futzing with trying to get the adjustment right.
Jul
26
accepted Can I easily replace the Throttle Position Sensor on a 1999 Maxima?
Jul
22
revised Can I easily replace the Throttle Position Sensor on a 1999 Maxima?
added new tag for tps
Jul
21
asked Can I easily replace the Throttle Position Sensor on a 1999 Maxima?
May
19
awarded  Revival
Apr
25
awarded  Teacher
Apr
25
answered 1991 Bonneville Idles Poorly When Stopped
Apr
25
answered OBD2 to bluetooth adaptor for 2001 Renault?
Mar
8
awarded  Scholar
Mar
8
accepted Do I Need to Compress the Springs to Install Strut Tower Braces?
Mar
8
comment Do I Need to Compress the Springs to Install Strut Tower Braces?
Cool, thanks for the info! @Bob - Great comment! :)
Mar
8
awarded  Student
Mar
8
comment Do I Need to Compress the Springs to Install Strut Tower Braces?
Thanks! As for tightening the tower bolts back down upon reassembly, I would assume these are ones which are specced to be tightened to a particular torque, yes? So as long as I tighten them to specs, they should be fine, correct?