Reputation
508
Top tag
Next privilege 750 Rep.
See votes, expandable usercard
Badges
2 8
Newest
 Commentator
Impact
~61k people reached

  • 0 posts edited
  • 1 helpful flag
  • 6 votes cast
Apr
6
comment Gear Shifting is Very Hard
Have you checked that the clutch is releasing fully? With the engine off, does it shift into 1st easily? And once in gear and clutch lever squeezed, does the motorcycle roll freely? If not, the clutch is dragging.
Mar
31
comment Problem switching in new dome lights in the front
... or if they're LEDs and have positive/negative reversed. (and not reversed when you tested it.)
Mar
24
awarded  Commentator
Mar
24
comment Brake fluid doesn't move in the master cylinder container
@JPhi1618, google tells me that is correct, if you want to go ahead and make your comment an answer.
Mar
20
awarded  Supporter
Mar
20
comment Seized nut & bolt - difficult to access
@Ben: could be, and that's more likely. But since it sounds like it is stripped, the suggestion still applies. With a helper and an impact driver, I think this is the easiest option, and worth an attempt.
Mar
18
comment 2003 honda civic overheats only after freeway speeds
do you hear the electric fan at the radiator turn on when it overheats? It isn't needed at travel speeds, but should be coming on as you slow down if the coolant is hot enough.
Mar
18
comment What is a transmission filter kit?
This looks like a followup question based on a comment to this question. It is a manual transmission, there is no filter.
Mar
18
answered Seized nut & bolt - difficult to access
Mar
14
comment Motorbike chain tight when in gear pushed forward but loose when rolled backward
It sounds like your assessment of "tight" and "loose" is based solely on the droop of the lower span of chain from the bottom of the rear sprocket to the transmission output. If so, the tightness isn't changing. You're just seeing tension or slack in that section based on movement direction. (I can't think of any other reason it would change rolling forward and backward, unless the suspension is also going up and down.)
Feb
18
comment No water flow in the radiator - 99 Cadillac STS
Another possibility is that the cooling system was not sufficiently purged of air after the water pump and thermostat were replaced.
Feb
1
answered Used odometer supposedly showing incorrect reading
Jan
22
comment Chrysler Voyager 1997 - How to run defrost without automatic switch on the AC?
Yes, it's always possible to disable it by disconnecting the clutch. But what some people look for is a way to conveniently run windshield defrost without the A/C compressor running. Because while dehumidifying with the A/C makes defrosting work better, sometimes you don't need max effectiveness, and it would be nice to be able to leave it on low without the constant A/C drag on the engine. This is especially true in vehicles where the A/C load on the engine is perceptible. Disconnecting the A/C clutch means you can't easily turn it on when you do need maximum effectiveness.
Dec
22
answered Chrysler Voyager 1997 - How to run defrost without automatic switch on the AC?
Dec
8
awarded  Revival
Sep
11
awarded  Yearling
Jan
14
awarded  Yearling
Sep
13
awarded  Nice Answer
Aug
18
answered 1940 Buick Super brake master cylinder removal
Aug
18
awarded  Revival