73 reputation
5
bio website
location
age
visits member for 2 years
seen Jan 17 '13 at 8:22

Sep
24
awarded  Commentator
Sep
24
comment Mercedes Atego OBD2 live data codes
I need a OBD-II codes. As I only need to read live data such as speed, rpm and so on.. And I have my program written with the codes for OBD and I can't get any data from vehicle
Sep
23
comment Mercedes Atego OBD2 live data codes
I think as far as I could find it on the internet that yes, this is compatible with the scanner
Sep
20
awarded  Promoter
Sep
17
asked Mercedes Atego OBD2 live data codes
Jun
11
comment How to find ignition wire on mercedes truck
can you look at this fuse box and tell me where would you connect it? www4.mercedes-benz.com/e/trucks/atego/betriebsanleitung/…
Jun
11
comment How to find ignition wire on mercedes truck
Can I ask you what is the best way to connect to the fuse box? Are there any special wires? and when I will use ignition, it is a wire that is coming from fuse box? do you have some link of what elements I can use to connect to the fuse box? As I don't want to be screwing something and I'll do it by myself.. Please help. You can send me an email if you don't want to be talking in here
Jun
7
accepted How to find ignition wire on mercedes truck
Jun
7
comment How to find ignition wire on mercedes truck
I will put it near the fuse box. I will take free one from the board for the input power. But there is not ignition on signal there right? I need to draw that wire from stereo for example. This unit that I have showed you is really great it starts after 20sec and delays shoutdown for 20sec and then cut the power source.
Jun
6
comment How to find ignition wire on mercedes truck
Hi thank you for your information. So basically why I need ignition off and on is to power a PC in the car. I have this power supply which gives me stable power. So what do you suggest me for this item? LINK: mini-box.com/DCDC-USB
Jun
6
awarded  Supporter
Jun
6
comment How to find ignition wire on mercedes truck
Thank you so much. So I just pull out the stereo and see where ign is going right? Yellow one you say? Yea that's usually the right color. I think it should be according to ISO as this is Mercedes :) They have standards
Jun
6
comment How to find ignition wire on mercedes truck
I need to send the signal to my unit when key is turned on or off. That's why I need this. Problem is there is now manual for it. Not that I can find of any
Jun
4
asked How to find ignition wire on mercedes truck
Jun
4
accepted OBD2 protocol in trucks
May
21
comment OBD2 protocol in trucks
Hi, I don't own this trucks. I just need to make a program for it and I don't have any of the documentation that you have mentioned. I have tried to send an email to manufacturers but I haven't been lucky.
May
21
awarded  Student
May
21
asked OBD2 protocol in trucks
Apr
17
awarded  Scholar
Apr
17
accepted Car electronics