2,737 reputation
1740
bio website
location
age
visits member for 2 years, 10 months
seen Oct 6 at 15:16

Jun
4
accepted Broken window crank handle
Jun
4
comment Passing Emissions Test: Can't figure out how to fix code P0705 on a 1997 Nissan D21 / Hardbody / Pickup
Is your shop an independent or a dealer? A Nissan dealer shop might have more / better resources for troubleshooting your problem.
Jun
3
revised Chevy C2 brokes its valves when the timing belt is broken?
linkage
Jun
3
comment Chevy C2 brokes its valves when the timing belt is broken?
Should be under the front windshield, in the lower corner on the driver's side.
Jun
3
answered Chevy C2 brokes its valves when the timing belt is broken?
Jun
3
comment Chevy C2 brokes its valves when the timing belt is broken?
Which engine do you have? You can look it up with a VIN decoder.
Jun
3
answered Driver side front inside door handle does not work on a 1998 Ford Contour LX
Jun
2
revised Broken window crank handle
remove scissor reference, discovered coat hanger works, it's much safer
Jun
2
answered How to determine if a Mercedes key is original?
Jun
2
comment Broken window crank handle
I don't think you have to yank all that hard to bust the clip. I was trying to pull the door panel off of a wreck at a junkyard, just trying to jam a pair of needle nose pliers into the gap caused it to come off. The door panel was already in pretty bad shape. I wouldn't try this if the door panel and handle weren't already written off, though.
Jun
2
answered Broken washer hose junction and clip hardware
Jun
2
answered Broken window crank handle
Jun
1
asked Broken washer hose junction and clip hardware
Jun
1
asked Broken window crank handle
Jun
1
awarded  Civic Duty
May
30
comment Audi A3 Brake warning after MOT
MOT == Ministry of Transport test?
May
30
answered Maintenance on used car with unknown history
May
30
answered 2007 S40 - Accessory Delay (5 secs) when turning the Key to Position II
May
30
comment 2007 S40 - Accessory Delay (5 secs) when turning the Key to Position II
Which shop was trying the software update?
May
30
comment 2007 S40 - Accessory Delay (5 secs) when turning the Key to Position II
CEM = Central Electronics Module.