Hot answers tagged

6

When you are traveling 20-30 mph, shift into high gear (6th IIRC) and push the gas 1/2 to 3/4 of the way down. If you see the RPM rise with no immediate increase in speed, the clutch is worn to the point that it is slipping. The amount of time between slight slippage and total failure is usually not very long. For a higher power car, you can expect to ...


5

"Blipping" the throttle just means giving it a very short (half a second) stab raising the RPM for a short time. It creates smoother down shifts because it raises the RPM to where it's going to be after the shift so the synchros have less work to do.


2

In a manual tranmission car, the clutch is 'meshed' only when both sides of the clutch - the engine side and the wheel side - are running at the same speed. Downshifting Example I'll make up some numbers for an example: Say you're at 3rd gear, going 45 miles an hour and the engine is at 2.5k RPM. If you downshift while still going 45 miles an hour, the ...



Only top voted, non community-wiki answers of a minimum length are eligible