Tag Info

Hot answers tagged

4

I think this points at the thermostat being bad. The reason I go in this direction is due to there being no heat coming from the heater vents. I'm not sure if Subaru has it this way, but many heating systems in cars only divert coolant from exterior of the motor to the heater core. If the thermostat is not allowing (much or) any coolant through, you'll only ...


2

From a technical service bulletin regarding the 2014 Subaru's: If you receive a customer concern of a “beep- beep-beep” sound when trying to operate the PRG, a likely cause is an incomplete initialization procedure. Repair Procedure: With the ignition “OFF”, open the PRG manually using a fluid motion (no light flash or beep should occur). ...


2

Without knowing specifics about the WRX engine, it sounds like you have a decent plan of attack. Here are some general guidelines for how to test for possible culprits in a sudden overheating situation: Cooling fan not running You'll want to check fuses, relays, continuity, and apply 12V to make sure that the fan hasn't mechanically seized. Restricted ...


2

Your question is subjective, but I can share some of my own experience in working with Subarus. The difficulty level of working on these engines will be defined by your mechanical ability and the type of work you plan on doing. Routine maintenance is fairly easy. The engine bay is easy to get around in my opinion, but it may take some getting used to. ...



Only top voted, non community-wiki answers of a minimum length are eligible