0
votes
1answer
27 views

Using narrower tyres than were fitted as standard, for reduced rolling resistance = > fuel economy

I have had several cars, which have all been "sporty", fuel economy has never been a requirement. Now it is. So I've bought a little 1.2 petrol which gives me 65mpg on the motorway/highway and 40mpg ...
3
votes
2answers
318 views

Is it advisable to upgrade/downgrade tyres of Hyundai Santro Xing eRLX to 145/70 R13 from 155/70 R13

I've a Hyundai Santro Xing eRLX car and currently it has 155/70 R13 tyres on four wheels and all tyres almost crossed 40000kms. I've recently replaced both front tyres with brand new tyres. I've two ...
2
votes
1answer
67 views

A3/A4/A6 alloys on an A5

I have an Audi A5 and I want to put genuine Audi 7-double-spoke alloys on it. The problem is as far as I know these alloys are only created in 20" for the A5. Does anyone know if it is possible to ...
5
votes
2answers
355 views

Why are there no Stainless Steel wheels to prevent Corrosion in Winter?

Steel wheels are often used in Winter due to its low cost, however, it is very prone to rust. Why are Stainless Steel wheels, more specifically 316 Stainless Steel not being more popular as the ...
5
votes
2answers
5k views

Differences and Recommendation between Steel and Alloy Wheels for Winter?

There are many discussions regarding steel vs. alloy wheels in Winter on multiple forums. It would be good if someone could lay out full facts and help scale these differences (questions below). For ...
5
votes
2answers
211 views

Should one fit the least-worn tires to the rear wheels?

According to the Owner’s Manual Saab 9-3 M2001 (front-wheel driven cars): WARNING When fitting just one new pair of tires, these should be fitted to the rear wheels, as these are more ...
2
votes
1answer
415 views

Looking for Tyres for Pulsar 150 bike with 180cc engine

I have a pulsar 150 bike modified with 180cc engine. I am looking for tyres(both from and rear). The tyre should have have good cornering capability and a very good grip. Till now I have. I looked at ...
3
votes
2answers
204 views

Front, driver-side wheel sounds like it's skidding when braking

I have a Nissan Micra (UK, 51-plate, 2001 model) and I've today noticed a sound a bit like skidding when I apply the brakes, gently, around 30mph. Driving and steering as usual is fine, no unusual ...
6
votes
1answer
123 views

Fixing wheel runout after “detour” through ditch

I recently took a detour through a ditch on the way to work. There was a lot of snow there which made itself known - my car and it got along pretty well but as far as I'm concerned, they need to ...
-3
votes
1answer
261 views

What are the pros and cons of using big tires in front on a bike? [closed]

I need to know more about the pros and cons of using different size tires in front and back. My bike has a lower curb weight, so every time its back tire skids.
3
votes
3answers
5k views

How to diagnose high speed vibration?

I get a vibration at high speeds (50+), can feel it particularly in the steering wheel, front seats, dashboard. I have been trying to figure out what's going on, keeping in mind that: All 4 shocks ...
2
votes
1answer
208 views

Had shocks, rear axle, tires replaced - alignment still out of spec and car vibrates?

Last year my old tires became ruined (cupped and feathered) because of ancient, horrible shocks and struts. Since then, I've had all new shocks put in, my rear axle was replaced (because toe couldn't ...
2
votes
1answer
557 views

How to determine tire compatibility [93 4runner]

I have a 93 Toyota 4runner with 31/10.5-15, if I understand the conversions correctly that would be a 267/76/R15 in metric. I am looking at replacing these tires and have found a set of 235/75/R15's ...
2
votes
4answers
279 views

Finding Cause of Slow Tire Leak 2001 Camry

I have a 4cyl 2001 Toyota Camry It has the following rims. I believe they're an aluminum alloy. I have a matching set of 4 DUNLOP tires rated for 44 PSI. I'll edit this post with specifics ...
5
votes
3answers
1k views

Tubeless Bead Won't Seat

In attempting to mount a motorcycle tire, I was unable to properly seat the beads. While the tire inflated and held air pressure, it failed to easily seat across identical points on both sidewalls. ...
0
votes
3answers
9k views

Buying new tires R15, R16, R17?

I currently have 205/55 R16 91V M+S Goodridge tires and an '06 Honda Civic Coupe. Should I stick with the same type of tires for go for something else? What's the difference between getting R16 or ...
11
votes
3answers
10k views

What are the benefits of low profile tires?

I have yet to find anyone that knows of any benefits of low-profile tires. All of the pros that I've asked have said there is no benefit. Naturally, the number of pros that I have available to ask is ...
11
votes
5answers
3k views

How to fix leaky tires after 2 shops couldn't

I have an SUV with factory 16" steel wheels and P235/70R16 tires. The tires have just under 30,000 miles of gentle driving on them. Two of the tires have been leaking quite a bit (about 10 psi per ...