Suspension is the term given to the system of springs, shock absorbers and linkages that connects a vehicle to its wheels. -Wikipedia

learn more… | top users | synonyms

2
votes
1answer
44 views

Is it safe to lower the S550 (2015+) Mustang by 1" in the northeast US?

I have seen 5.1" and 5.9" listed as the ground clearance on the S550 (2015+). I don't know which is true, but I would like to lower the one I have ordered by 1" to improve handing. Is this safe to do ...
2
votes
2answers
24 views

How to make ride less bouncy?

In my 2003 Opel Agila, the ride is really bouncy. Whenever I go over bumps in the road, it feels like I am almost out of control. It is generally a bouncy car, but it this one seems to be worse than ...
15
votes
6answers
61k views

Is it safe to drive a car that has a broken suspension spring?

Yesterday I was driving home from work and heard a loud noise which I can only really describe as a "clang". After looking at it today, it looks like the spring for the front left (passenger side) ...
0
votes
1answer
122 views

Clicking noise when starting from low speed, going over bumps

I have an '04 Echo that had the sway bar link replaced. However, a new annoying sound has developed. It usually happens when I'm starting from a dead stop, or going over bumps at low speeds. The sound ...
0
votes
1answer
17 views

05 jeep wrangler rear sway bar connection is broken

05 jeep wrangler .The link that connects my rear sway bar to the rear end housing. What's it called. where can I buy a replacement. To be welded or fit in.
1
vote
2answers
85 views

Crackling/popping when wheels move at slow speed (e.g., rolling forward in drive)

My suspicion is that there is something loose (pebble, rock, or some other small, foreign object) behind the hub cap, but I hear a crackling or popping sound (almost like Pop Rocks or Rice Krispies) ...
2
votes
1answer
553 views

Leaving heavy load on the back of a pickup truck

I was wondering if it is bad for a pickup truck to keep a heavy load in the back (e.g. 1800 lbs) for prolonged periods of time (e.g. 2-3 days), assuming the truck is not in motion. The disadvantage ...
7
votes
4answers
715 views

Car pulls to right when letting go of accelerator?

I'm driving an old Grand Voyager minivan temporarily, and notice that when I accelerate then let go of the accelerator, the car pulls slightly to the right, and I have to correct it by steering a ...
3
votes
0answers
30 views

Repeated rear bearing hub assembly failure

('04 Cavalier; 120K miles) I'd been having a whining noise on (highway) left turns. I found significant play in the right rear hub assembly, which I replaced. In less than 200 miles, the same ...
1
vote
2answers
51 views

severe tire shake at highway speeds under acceleration

I have a 2005 Honda Odyssey with 201000 miles. At speeds above 60mph there is a heavy vibration from the front wheels. It is gets worse when accelerating and will smooth out immediately upon lifting ...
3
votes
1answer
196 views

Clunking Noise from Rear, Right Tire when hitting bumps

I have a 2003 Ford Taurus SE with ~95000 miles. It has been a very cold and harsh winter in New England. Recently, I have been hearing a clunking noise in the rear, right tire region when hitting ...
1
vote
3answers
51 views

How do I prevent bushing wear and what parts besides the suspension uses bushings?

I just did my upper control arm bushings on my Honda because it's lowered and I have an aftermarket control arm with camber adjustments. The wheel would pinch inward and send me toward the roadside. ...
7
votes
3answers
353 views

What are the Advantages of a Single Side SwingArm on Motorcycles?

I have noticed that Ducatis , Honda and Triumph have bikes with a Single Sided SwingArm Much like most of the scooters. Are there any advantages of following this design , if so why are not all ...
-2
votes
2answers
58 views

Which cars are more comfortable? [closed]

If you're driving for around 4 hours continuously which types of car would stand out in comfort? For example sedan or suv, or any other type. Definition of Comfort: Less noise Ease of getting in ...
1
vote
1answer
31 views

When to get an alignment

Sometimes it can be hard to tell when your vehicle needs an alignment other than when there are obvious warning signs. For example, steering wheel off center when driving straight, car veering to one ...
1
vote
1answer
24 views

turn-sensitive road noise

'04 Cavalier, 115K. Tires are decent, and don't seem to be wearing unevenly. Low-pitch droning noise at highway speed. Originally, this was only when steering left; but now, also when going ...
5
votes
1answer
84 views

Rust underneath rear of car (Toyota Mk1 MR2)

I have recently acquired an old (1989) Mk1 Toyota MR2 and took a few photos of the underside rear of the vehicle. There seems to be a fair amount of rusting on the rear axle and gear box: gear ...
2
votes
1answer
23 views

Suspension broken - attempting triage

My wife's Honda Jazz hadn't been driven for a few days, and on driving out of our street yesterday there was a large clang and the front right corner dropped an inch. Turning the wheel lock to lock I ...
3
votes
1answer
49 views

Why would I feel disbalanced or thrown around when riding a motorcycle

I have a Yamaha XJ600N, and at various points of time when riding around in the city at 50 to 60 kph I have had this strange feedback from the wheels or suspension that makes me feel either slightly ...
1
vote
2answers
32 views

New struts on a 2000 model year car with 225k miles, replace coils?

Should the suspension coil springs be replaced on a Toyota Celica that is 15 years old and has 225k along with the struts or do the coils never really go bad? How about the top bearing plate?
0
votes
1answer
290 views

My ER6 was lowered to accomodate a shorter driver than me. How can I adjust the height?

I want to adjust the height of my Kawazaki ER6n from 2006. Specifically, I want to reset the height to factory settings. Is this something that's possible to do without hiring a certified mechanic or ...
3
votes
1answer
66 views

Do the front wheels turn a little bit on potholes and bumps?

I just replaced the inner and outer tie rods on a vehicle, and some time later was thinking about the linkage. I don't recall if the inner ball joint was at the same location as the inner suspension ...
2
votes
1answer
42 views

Fork tube seals Suzuki sv650

So I recently inherited a 2002 Suzuki sv650... It was garage kept for about 6 years and needs some love. I noticed that the rubber seals on top of the fork shock tubes won't stay with the tubes... ...
3
votes
1answer
145 views

Why is my car tramlining(pulling/veering when I hit road imperfections)?

So twice this has happened, and the first time it was much more violent. So far I have replace the upper control arm "inner" bushings on the right side but today it happened again, but not as bad, and ...
3
votes
1answer
77 views

How to improve suspension on my bike TVS Star City 110 CC 2012 Model

I ride a TVS Star City 110 CC 2012 Model bike weighing 109 Kgs. I am feeling uncomfortable with the bike suspension. When I checked with my mechanic, he said it is fine. I can feel it is jumping even ...
2
votes
3answers
233 views

Does briefly flying in air hurt my car?

I drive a big SUV (infiniti qx80). I was going down a steep hill at slightly above the speed limit (around 45mph), and the road had a bump like this: My car flew briefly in air and then landed. I ...
3
votes
2answers
431 views

Bent front fork on a bike

There's a previously owned 2009 YAMAHA FZ16-S that I'm thinking of picking up. It has a slightly twisted and bent fork (plausibly caused by an accident). It's only apparent when you ride it for a bit. ...
1
vote
2answers
130 views

My motorbike handle gets a hit when I hit a bump or pothole

My 2 month old bike is a 200CC Bajaj Pulsar (made in india) with only 2000kms on the odometer. I have ridden it carefully. I touched 100km/h accidentally on a drag race with my friend, just one time, ...
1
vote
1answer
66 views

Is Honda Shine Rear-Suspension claimable on Warranty\Extended Warranty [closed]

I own a Honda Shine (125cc) bike which started giving a less cushioning problem on its rear suspension since it was near to its second service (1200 km, 5 months from purchase). Though I told the same ...
0
votes
0answers
9 views

'04 Echo shock mounts, Type A vs Type B

So I'm noticing quite a bit of rust on my strut and near the mounts, and I was thinking about doing this myself. So when I dig into the service manual, and possibly ordering parts, I found a not so ...
3
votes
2answers
106 views

GSX-R front suspension technology timeline

I have noticed that people frequently choose the GSX-R front end for a front end conversion on old bikes to improve handling and comfort. The GSX-R was produced from 1985 through the present, and I'm ...
4
votes
3answers
2k views

Removing badly rusted and broken bolt from suspension

I'm stuck trying to replace the rear lower control arms on my 92 Civic. One of the bolts was broken, and while I've now gotten the old arm off by taking a Dremel to the bushing and bolt, part of the ...
4
votes
1answer
14k views

How to tell if the Control Arm is bad too, or just the ball joint

I have a 1997 Ford Expedition 4WD truck that has a LOT of wiggle on the front left tire. I'm assuming that this is caused by a bad ball joint. Is that a safe assumption to make? Assuming that it is, ...
4
votes
2answers
4k views

Host of small performance problems in 2006 Hyundai Elantra

I bought a used 2006 Hyundai Elantra (Automatic) back in early 2011. At the time, I was needed to have a car quick, and it seemed like a good deal, but the longer that I've owned it, the more problems ...
0
votes
2answers
45 views

Can a 41mm shock be replaced in Bajaj Pulsar 150 by removing the company fitted one?

Can the OEM shock be replaced on a 2008 Pulsar 150? I would like to remove the OEM shock and replace it with a 41mm aftermarket model.
6
votes
3answers
453 views

Trying to figure out the name of this car part!

I got new tires today and saw that the part that's circled is broken on my car. It looks like it just snapped at the top because part of the bolt appears to still be in whatever the tube is. Anyone ...
3
votes
1answer
54 views

What's wrong with worn-out suspension?

I'm about to buy an RV from a friend. I've never bought any kind of vehicle before, and I know nothing about cars except through web searches. But I do have a grad-level physics education and some ...
1
vote
1answer
68 views

Car shudders above 45 mph after after spin out into a ditch

I spun out in freezing rain and ended up in ditch was doing 60 down to 45 when it went all way around and onto shoulder. Which was soft dirt and buried front tires. My vehicle is a 2003 Mitsubishi. ...
-1
votes
1answer
131 views

Compliance Bushing for 2007 Honda Odyssey

What are some part numbers that I can cross reference for the compliance bushings (control arm bushing) for a 2007 Honda Odyssey?
4
votes
1answer
133 views

Acura TL 2001 squeaking noise

Worried student here! I bought an Acura TL 2001 about 7 months ago and the car was mechanically sound. About a month and a half ago i started to hear a squeaking noise. The noise only occurs when the ...
1
vote
1answer
283 views

Ran over a curb at speed; wheel is bent and rubs against wheelwell on turns

The other day I was doing 30 mph on a downhill road in my Renault Clio 1.2, and went to turn right, but my brakes did not work, and so I just turned into the corner and went straight into and up a ...
3
votes
1answer
40 views

Ford Taurus 01 shock holder problem

My car was making scratchy metal noise when turning left coming from the back. I checked the bottom of the car and found the issue. I don't fully know how to address it what the part's name is and if ...
4
votes
1answer
103 views

Front wheels have different camber after suspension replacement

I recently got my vehicle's front right suspension replaced by some mechanics. Before driving off from the mechanics I had a look at the front and noticed that the right wheel (driver's side) has the ...
1
vote
1answer
352 views

How to Improve Suspension on my bike Honda Shine

My Bike has rear Suspension 3 Step Spring Loaded Hydraulic Shock Absorber & Bike total Weight (kgs) is 122 and its around 3yrs over 90000km run. i didn't feel comfort with suspension as now a days ...
3
votes
4answers
8k views

Clanging in back of Mazda 3

I have a 2007 Mazda 3 sedan with ~100,000 miles on it (it's the 2.0L version). Last October, I noticed a significant clanging noise that was coming from the rear of the vehicle whenever I went over ...
2
votes
1answer
452 views

Front Suspension Rattle (Linked Sound Clip)

I've got a 1994 Nissan pickup. I had new shocks installed about 3 years ago I replaced the ball joints about 2 years ago I replaced the tie rods and front brake calipers about 1 year ago I had the ...
2
votes
1answer
32 views

How to change Ball-Joint with No Motor

I have a 1970 Camaro and put the wrong Ball-Joint in the upper control arm. Does anyone have an idea on how to change it without a motor? I can't drill a hole in the garage floor to anchor the frame. ...
1
vote
4answers
84 views

Is it safe to drive a Fiat Punto with a failing passenger side wishbone?

I've been told by a garage that I need a NSF wishbone due to a knocking noise. The Punto is 13 years old. is it safe to drive until I can get this done?
-1
votes
1answer
398 views

Why do i have to service my gearless Honda Activa every 2 weeks

I currently own a Honda Activa which is of a 2007 make. After three years during a heavy traffic jam the conveyer belt got heated up and burnt due to continuous acceleration and braking. I got it ...
0
votes
0answers
587 views

Rear coil spring replacement Mazda 3

So my mazda3 has about 130k miles on it - it's a 2007 2.0L. I've already replaced the rear coil springs once about 3 years ago because they were snapped (had a shop do it, and I'm probably not going ...