What is a good place to begin building a kit/set up for performing your own service? For ex: oil changes waxing detailing What is the best starting equipment one can start on?
Yesterday, I was driving my car for about 30 minutes on the highway at speeds of up to 60 mph. I felt my brakes weren't really working and looked down to notice my emergency brake had been on the ...
Possible Duplicate: Does Downshifting (Engine Braking) Cause Extra Wear and Tear? Since the days of taking drivers ed (many years back). I was told that when you encounter a steep or ...
This post explains why it's a potential hazard to clip to the negative post on the dead battery when giving a boost. But I've also been told that I could damage the electronics in my own car if I give ...
I was wondering if it is bad (for the frame or the drive train) to leave my 4WD V6 Tacoma on 4 jack stands for several days while I work on the transmission. I could certainly lower it down after ...
I recently read from a reputable source that tyres should be replaced at 3.2mm of tread thickness, not 1.6mm as the previous dogma suggested. My tyres are all in the 2.0mm - 2.5mm range. I understand ...