Last year I added crash sliders to my aging Honda CBR 600F (1998) Recently whilst trying to remove the fairing for other work, I found the nut and bolt were "seized". Actually, by using a spanner at ...
The nuts at the knuckle on my outer tie rod ends are castle nuts, which are locked by cotter pins fed through holes in the studs. The nuts also have a torque spec (27.0±2.5 N∙m, in this case). If I ...
I have an ~1986 Yamaha Ag 200 and I've been pulling it apart as a bit of a hobby to understand a bit more about how it works and hopefully in the end get it going. I've opened it up so some gears ...
I want to use an external charger to charge the battery in my US-market 2008 Jetta 2.5L SE with an OEM battery. I need to figure out which nuts to get to fit the existing battery terminal bolt, in ...
I'm a shade tree mechanic with an old car that's got a fair amount of rust on various fasteners (particularly in the under-regions). When I'm doing maintenance, I often like -- or find the need to -- ...