Please specify the brand, model and year in your question.

learn more… | top users | synonyms

0
votes
0answers
11 views

2000 Road King stalls from 1st - 2nd gear

Added a Fueling controller to 2000 Road King. It stalls from 1st - 2nd gear going up hill. Is there an answer?
2
votes
2answers
41 views

Kawasaki ZZR600 Model D3 - where is the fuel filter?

I've been looking for the location of the fuel filter. At first I thought it might not have one, and only the Model E ZZR's have one, because there seems to be no explicit mention of it or diagram in ...
2
votes
0answers
23 views

Changing the exhaust on a motorbike

I have a Yamaha XJ6 from 2012 and I would like to change the exhaust. But I have a choice. Do I change only the muffler or the whole "line"? Other than cost what are the pros and cons of changing ...
2
votes
3answers
38 views

New batteries with acid at 80% charge— if I run then tend, will it bring it up to 100%?

I have read that, when you add electrolyte and acid to a new battery, it will then be at 80% of max charge. You can put the battery in your bike and it will turn. However, it's highly recommend to ...
5
votes
2answers
67 views

Unknown part fell out of my motorcycle

So I was taking the battery out of my bike (99 Honda Shadow 750 ACE) to ship it this past December, when two parts of the bike I'd never seen fell out from somewhere near the battery case. They sort ...
3
votes
1answer
87 views

Slight dent in motorcycle oil filter: bad for flow?

I replaced my motorcycles oil filter the other day and accidentally dented the outside casing of the new one putting it on. I know its probably nothing, but would this impact the flow of oil through ...
3
votes
1answer
46 views

Motorcycle stood for over 12 months, turn over by hand first?

My 2006 GSXR 750 has been stood for over 12 months, I have drained the tank, and oil, and I'll do the coolant after I get it started, and give it another oil change. Is it worth me removing the plugs ...
0
votes
1answer
107 views

XJ600 1994 Seca 2

I am wondering if anyone can shed light on an issue we are having with this particular bike. Basically, the bike starts fine cold and warms up and drives perfectly for about 15 minutes ( responsive to ...
3
votes
2answers
18k views

Symptoms of Lean or Rich carb settings on a motorcycle.

I have a 1981 Yamaha xs650. I recently put in K&N stock replacement filter (ie, they are in the airbox and conform to the size of the original), however they may be leading to a leaner mixture ...
1
vote
2answers
79 views

Motorcycle gear changes alternate between stiff and normal

I have a 6 month old Kawasaki W800 I bought new. Sometimes when I ride gear changes seem stiff and clunky. Other times they seem smooth and normal. Would anyone know what could be causing this? ...
1
vote
5answers
479 views

Replacing regular twin shocks with nitrox for my bike

I have a bike with regular Twin shock absorbers. I am planning to change this to a nitrox twin shock absorbers. Because when I used to ride my friend's Bajaj Pulsar 150, my back feels more comfortable ...
1
vote
2answers
58 views

Yamaha Vstar 250 won't start: need to diagnose and fix possible fuel, battery, or flooded carb

My riding experience: 1 day. Already I'm an idiot. This will probably be a good laugh for most of you. I purchased a used bike, Yamaha VStar 250, <2,000 miles, <4 years old. Battery has not ...
4
votes
1answer
191 views

Suzuki GSR600 low idle revs and unstable

Just a week ago I noticed in my motorbike unstable rpm, +-300rpm. But today I found that the idle rpm are below 1000rpm, at some points around 500rpm (Normally is 1500rpm). I'm due for the annual ...
3
votes
1answer
126 views

Kawasaki ZZR600 - Engine idles ok. Choke ok. Cuts out when open throttle. Possible causes?

I have a 20 year old Kawasaki ZZR600. She was running fine in December. I didn't ride her for a few weeks in January. Left the battery on maintenance trickle charge. A few weeks or so ago I fired her ...
3
votes
2answers
68 views

How do I know if motorcycle chain & sprocket need replacement?

I'm aware of how important they are, but have been coming up empty in my searches to determine if they're worn to the point of needing replacement. The service manual just says to inspect and replace ...
2
votes
2answers
79 views

Ducati ST4s not starting

I ride a 2002 ST4s that was bought new in 2008 and has now travelled 8800km. I have fitted a power commander and carbon mufflers and done some minor alterations to the air box. Spent some time setting ...
2
votes
1answer
62 views

2 week old disk brake pads rubbing on rotor. Is this OK? (motorcycle)

I got the pads on the front brake of my bike replaced 2 weeks ago. Immediately I heard a rubbing noise at low speed. I thought this would be ok - that the pads just had to be worn in or something, but ...
1
vote
2answers
2k views

Why bikes with gears are preferred when there is gearless(or automatic gear) technology?

I know that lower gears have higher acceleration & low top speeds and higher gears have low acceleration & higher top speeds. But I would like to know why this gear system was designed first ...
2
votes
0answers
28 views

GSX-R front suspension technology timeline

I have noticed that people frequently choose the GSX-R front end for a front end conversion on old bikes to improve handling and comfort. The GSX-R was produced from 1985 through the present, and I'm ...
2
votes
1answer
123 views

Why don't motorbikes have chain covers?

I notice that except for small commuter bikes and older bikes (before the 80s), hardly any of the larger and/or sportier bikes have covers to protect their chains: . They seem quite practical, and ...
3
votes
2answers
514 views

is motorcycle chain lubrication absolutely necessary?

Lubricating your chain is certainly one of the easiest maintainance tasks for a motorcycle owner, however I frequently wonder how necessary it really is. Are there any negative effects which can come ...
1
vote
3answers
202 views

Frequency for servicing bike?

I have a Hero Honda air cooled single cylinder 4 stroke engine bike. It's about 5 years old, and I've done all the recommended servicing on time. I lost the servicing manual, but I remember that the ...
3
votes
2answers
91 views

Going more than recommended Speed in Break-in Period

I have a new Yamaha motorbike. Seller told me not to ride speed more than 50 Kmph for first 1000KM but I rode it 60 for 10 - 15 minutes due to some reason. How does it affect to my Motorbike ?.
2
votes
0answers
41 views

Motorcycle tire shopping confusion

I'm having a hard time choosing a tire for my bike ('11 Yamaha FZ8n). The main source of my confusion are very similar markings on a multitude of tires that don't make a lot of sense to me. I was ...
2
votes
1answer
47 views

What is the right way to attach the Micarb to the engine head of my Enfield Bullet 500?

Before an upgrade to a new Hitchcock conical air filter, the carburetor was held in place by both the original (massive) air filter and the rubber manifold attached to the engine head, and it was ...
3
votes
2answers
96 views

How to remove all the fluid out of my motorcycle fuel tank?

I will be cleaning out my motorcycle tank using electrolysis. First, I have to remove all the gas from the tank, and then do the cleaning and then remove all the water that's left over, but I have a ...
0
votes
1answer
132 views

Motor cycle maintenance tutorials [closed]

I am searching for a tutorial about motor cycle maintenace. I tried in google search but not much of use: I get only blogs and website which give basic advice that - "go and consult a good mechanic". ...
6
votes
2answers
166 views

Change in exhaust note after extreme backfires--what did I break?

I had quite a morning with my 1986 BMW K75 this weekend. The plan was to ride the bike to a friends house to store it for the winter. The weather was pretty cold on this particular morning, perhaps ...
5
votes
3answers
186 views

What is the best practice to maintain a bike?

I have an Avenger 180cc bike, I want to maintain the bike without much help from the service center, external help etc. What would be the best practice methods?
6
votes
3answers
3k views

What does the 'cc' mean on a motorcycle?

I'm relatively new to motorcycles, my flat mate taught me how to drive his two Royal Enfields around New Delhi, and for the past year and a half I've been taking care of them as they break down ;) ...
12
votes
2answers
892 views

What is the technical reason the engineer decided the motorcycle gear pattern as follows?

The gear pattern is selected by clicking a lever with your left foot, and is typically laid out as follows: 6th gear (if applicable) 5th gear 4th gear 3rd gear 2nd gear NEUTRAL 1st gear What ...
7
votes
3answers
1k views

What may happen if I do not replace my motorcycle's chain

I have a aging (y2k) motorcycle with not too many Ks on the clock. I have been told by a mechanic that I need to replace my sprockets and chain. This seems reasonable since the chain has been poorly ...
5
votes
2answers
168 views

Is it okay to run aviation fuel (100 low-lead) in a dirt bike?

I'm wondering if it will be okay to run 100 octane low-lead aviation fuel in my 2007 RM250 motocross bike (two-stroke). Half of the people I've asked say yes, while the other half say no. Will it be ...
4
votes
2answers
233 views

What's the proper method of replacing the crank shaft oil seal of a Honda Rebel?

I've been searching for a guide, but haven't found anything the deals with the oil seals specifically. My '09 Honda Rebel is leaking oil into the flywheel cover, and I suspect the flywheel and crank ...
8
votes
3answers
1k views

How do you get the carburetors out of a 1983 Kawasaki KZ1000 P?

It's a 4-cylinder engine, and the carbs are really wedged in there. The best way I know is to loosen the boots on both sides, pull the carbs back, and try to slip them out sideways, but what a pain! ...
2
votes
1answer
411 views

Motorcycle gears seem really stiff and hard to shift when cold

So I have noticed that even for a fruther 10 to 15 mins after warm up, the gear lever on my motorcycle (bought brand new - 6 months old) seems really stiff and harder to change. COuld this have ...
4
votes
2answers
137 views

Proper fuel for motorcycles?

I've heard that regular petrol (92 octane ULP) from some fuel companies is not good for motorbikes as it is intended for cars only. Is this just an old wives tale?
4
votes
3answers
950 views

Motorcycle Leaking Fuel (1999 CBR600 F4)

Just fired up my motorcycle after 3 years in storage. Changed the oil and replaced the fuel in the tank. It starts easily. It is leaking fuel from somewhere under the gas tank. The engine has a ...
4
votes
4answers
1k views

How to add hybrid technology to a 4-stroke engine motorcycle?

I am enthusiast of automobile, and especially of motorcycles. I don’t know much about engines practically, but I read a lot. I was reading an article at How Stuff Works about the hybrid technology ...
1
vote
2answers
100 views

How can I check if my motorcycle's suspension is working correctly?

How can I check if all of my motorcycle's suspension parts are working correctly, and carrying an even load?
2
votes
2answers
297 views

Weak front brake on dirt bike

After changing the air tube in my front tire and reinstalling the wheel on my Suzuki RMZ450, I noticed that the front brake lost a lot of stopping power. What caused this and what do I need to fix to ...
3
votes
1answer
133 views

How many kms is too many for a 400cc bike

I am looking at getting a Ducati Monster that is 400cc and 1996 but has done around 42,000kms. How many kms is to many before you will start to run into problems
9
votes
2answers
2k views

Why is my motorcycle losing power when accelerating?

I ride a Honda Rebel 250 motorcycle and over the past few days I find that the bike is losing power when accelerating fast. When I twist the throttle to accelerate quickly (in any gear) I hear the ...
2
votes
0answers
94 views

Dirt bike silencer core cracked/rusted

After removing and disassembling my FMF Factory 4.1 dirt bike silencer, I saw that the inner core was cracked and extremely rusty (having the potential for more cracks). I definitely want to fix this ...
2
votes
1answer
327 views

How do I clean/grease my dirt bike steering bearings?

My dirt bike's steering has become increasing harder to steer. Other dirt bikes I've ridden have much smoother, almost effortless, steering. How can I have that same smooth steering? What parts do I ...
0
votes
1answer
596 views

Top Speed varies even when using the same bike

I own a Hero Honda CBZXtreme bike. The top speed that I have reached is 122Km/Hr. But I am not able to reach this speed always. Sometimes the speed does not even cross 105 Km/Hr while travelling on ...
4
votes
1answer
188 views

Can't remove stuck rear dirt bike axle

I'm trying to remove the rear wheel on my 2007 Suzuki RMZ450. I've removed the axle bolt and tried banging the axle with a rubber mallet for about two weeks now. IT WON'T BUDGE. Not even a little bit. ...
1
vote
1answer
71 views

What is the bank sensor attached to on a Honda CBR1000RR 2012?

I am repairing a bike which had its front totally taken out. The instruments panel and headlights are gone. One of the first things I'd like to do is install a new bank sensor. I purchased the bank ...
2
votes
1answer
399 views

Looking for Tyres for Pulsar 150 bike with 180cc engine

I have a pulsar 150 bike modified with 180cc engine. I am looking for tyres(both from and rear). The tyre should have have good cornering capability and a very good grip. Till now I have. I looked at ...
2
votes
1answer
112 views

Squeal (vacuum leak?) and high idle after rebuilding carbs on '82 Yamaha XJ 750 Maxim

I've got an '82 Yamaha XJ 750 Maxim. I rebuilt the carburetors this weekend, and after putting it back together, it seems like it's got a vacuum leak. There's a loud squeal every time a cylinder ...