A self propelled two wheeled motor vehicle with an engine larger than 50cc's.

learn more… | top users | synonyms

5
votes
1answer
142 views

Honda Shadow VT750 louder exhaust noise, low power

Recently, my motorcycle got smashed by my girlfriend (who was driving behind me) in the rear. As a result of the impact, I got propelled into the rear of the car in front of me. Both fenders are ...
2
votes
3answers
1k views

TVS Apache RTR 160 - What Grade Engine Oil Should I Use?

I bought a TVS Apache RTR 160 second hand. I want to know what grade engine oil should i use for my bike. I was suggested to use 15W50. Is that a good choice. The bike has done almost 65000Kms.
2
votes
1answer
109 views

GSF400 Bandit carburetor model or type,

I have Suzuki Bandit GSF400 model '92. May I know the type of carb do I have on it? I am trying to do some replacement on jets but I need sizes.
14
votes
2answers
405 views

'00 Honda CBR929RR - Unknown issue, help!

Sorry for the ambiguity here.. I'm not sure what the issue is with my bike. I have a bunch of symptoms and my hypothesis is that it's a cascading failure and I'm just seeing a bunch of effects down ...
6
votes
2answers
76 views

Rain tyres for motorcyles

I have recently started driving a motorcycle to work (60 km/day). I have a Honda XR125L. Today I had an accident. I was driving at 10-20 mph and wanted to break for cars that were standing still. I ...
5
votes
1answer
132 views

When should I perform a valve head adjustment?

My 2012 Yamaha R6 has about 12000 miles on it. During that times I've had a couple rough accidents and I think the combination of those two factors it may be a good idea to check my valve clearance ...
5
votes
1answer
85 views

What does an EXUP servo and subsequently EXUP eliminator plug actually do?

This question relates to my 2012 Yamaha R6. I removed the kickstand safety actuator because it was bugging me, I found it useless, and my habit is often to lift the kickstand when I start moving ...
9
votes
1answer
2k views

Will any starter relay / solenoid do? For my motorcycle

I'm looking for a starter relay / solenoid for my 2004 Yamaha TT600RE. That part seems to be scarce for this bike. How interchangeable are solenoids for motorcycles? Will any Yamaha 600cc solenoid ...
2
votes
1answer
832 views

2015 hawk 250cc enduro motorcycle

While riding down the street, our motorcycle just died. Tried to restart it and it sounded like it wasn't firing. We changed the plug and ignition coil and still not firing. What should we do now?
5
votes
2answers
391 views

Why do most mass-production motorcycles have their intakes facing backwards?

Almost every motorcycle I have seen has its air intake mounted such that it is sucking in air from the direction opposing travel. According to fluid dynamics, if the intake is made to face forwards, ...
2
votes
1answer
218 views

How to learn motorcycle maintenance theory

I'm a motorcycle novice and want to learn how to maintain a bike and fix problems that may arise. I've found a few great videos that have elucidated some basics: How a motorcycle engine works: https:...
3
votes
1answer
256 views

How to find model year of this Honda Shadow bike 'NC34-1002157'?

Recently, I was about buying nice Honda Shadow but the seller didn't know the model year of his bike. I saw many 17-digit vin numbers and I can decode it, but 11-digit vin is difficult and I don't ...
7
votes
2answers
2k views

Motorcycle transmission occasionally pops out of gear

I'm having an issue where the transmission will occasionally downshift by itself during a fast acceleration. I have a 2005 Suzuki Vstrom 650 and it's been a great bike so far. At pretty high revs, 9k-...
3
votes
1answer
94 views

Hauling a motorcycle cross country — more or less wrong ways to do it.

I need to haul a 425 lb KLR650 motorcycle from Hoboken NJ to Oakland CA. I'm on a budget so I'd like to do this as cheap as possible (under $200 is great, maybe $500 max). I have a 1996 B4V VW TDI ...
4
votes
2answers
660 views

Parking a motorcycle with hot engine

I have a question regarding my motorcycle (Yamaha FZ8 - 4Zylinder 800cc). At the weeksend I was driving through a town. It was very hot outside and I parked the bike. The coolingwater-temperature was ...
5
votes
2answers
676 views

Reboring a cylinder: compression ratio of new piston

I'm going to have the cylinder of my 2004 TT600RE motorcycle rebored (because it's damaged, not to increase power). The manual says the piston size is 95mm and the compression ratio is 8.5 : 1. I'm ...
7
votes
1answer
86 views

Clutch pulls in too easy after reassebling the clutch basket, what did I did wrong?

I have a 1982 Kawasaki KZ550C LTD. When I got the bike one of the bearings on the starter assembly was worn out and would slip. So I pulled the engine and had to tear it down in order to get to the ...
3
votes
0answers
48 views

Help identify round diodes - need a replacements [closed]

Few diodes died in three phase rectifier circuit on a motorbike. I can't find any suitable replacement online since I can't understand what kind of packaging is it. They round like a round pill. 7mm ...
4
votes
1answer
2k views

Why is this motorcycle burning oil, and how can I get it to stop?

I have a newbie question for you. I'm considering buying a 2004 Yamaha TTR600RE- a single-cylinder, air-cooled dirt-focused dual-sport bike. It's perfectly set up for adventure touring, which is what ...
1
vote
0answers
52 views

Motorbike Lack of power/speed [closed]

I bought an ajs dd125e-8 it was delivered on Monday and I had no problems until yesterday on my way home from work. I got half way home and the bike just started to slow down and no matter how much ...
3
votes
2answers
382 views

What is choppy throttle response and bad fuel mapping and can it be fixed?

I'm looking to purchase a motorcycle and according to it's wikipedia article it has two major flaws: Being the company's first fuel-injected 600cc sportbike, the initial 2000 model had choppy ...
2
votes
0answers
120 views

What is Zongshen ZS125ST Carburetor 24mm KF Standard of Japan compatible with? [closed]

I have a carburetor "KF Standard of Japan" apparently Zongshen ZS125ST Carburetor 24mm KF Standard of Japan. What other makes/models is it compatible with?
4
votes
1answer
33 views

Do I have to change the chaincase lubricant when adjusting the clutch during routine maintenance? 2015 HD Road King

I am completely new to motorcycle maintenance, but need to adjust my clutch. I have watched a demonstration video for a similar model (I think) - but couldn't find an exact match. Since I will be ...
2
votes
1answer
42 views

Is there a source assessing repairability of motorbikes and cars?

For phones you can find ratings based on ease and cost of repairability (assuming you do everything yourself). Is there such a source for choosing a motorbike or car that you want to maintain yourself ...
3
votes
2answers
280 views

Why does my front wheel rotor is heating up more than rear one?

I had been facing high fuel consumption lately. To my surprise I discovered that my front wheel free rotation seems bit restrictive to my rear one even when rear wheel drags chain and two sprockets ...
2
votes
2answers
131 views

How come I can put in more gas in the tank than possible?

I have a Honda Varadero 2010. When I fill her up to max, the level of the liquid in the tank is at maximum, just a tiny bit below the rim of the nozzle. Then, I poor in some more and the level raises ...
5
votes
2answers
584 views

How to clean engine when oil is contaminated with metal shards?

During a recent oil change Istripped the oil pan bolt. It took a bit of trial and error for me to realize the stripped hole was a 14mm 1.25 thread so I got a tap and rethread it to 14mm 1.5 thread ...
4
votes
1answer
93 views

Should I worry about buying this bike?

I'm looking at buying a 2014 Ninja 1000 with 1,400 miles on it. I asked the guy about the maintenance he's performed and he said he hasn't done anything to it so far. I know you should change the oil ...
5
votes
1answer
167 views

2007 Hyosung GT250R not starting, some repairs have been made

Hoping to find some good advice on fixing my (above mentioned) motorcycle. I'll try to keep it brief but with as much details as I can. I had an issue with the bike and it sucked up some varnish from ...
2
votes
1answer
284 views

Oil all over outside of engine

I have a 1988 yamaha route 66....I put some oil in, it has a slow leak by kickstand...I took it for a 5 mile ride last night. Afterwards I found it sitting in oil, and the outter engine /side was ...
5
votes
2answers
202 views

Kawasaki H2R flames come out of exhaust system

Kawasaki recently launched the H2R motorcible. The world’s only supercharged production hypersport streetbike. This bike has 326 bhp. I saw few videos of this incredible bike. My question is about ...
2
votes
1answer
81 views

1987 Yamaha fz700 handlebar lock

On my ignition there are a couple positions, on, off, lock, and p. I assumed the lock was for the handle bar lock, but it doesn't lock when I switch it to that, when I switch it to P though it ...
3
votes
1answer
47 views

2005 Suzuki Katana stalls when put in gear

I have reworked all the carborators on the motorcycle. All seemed well but once it was put in gear, it stalled. What do I need to look for?
6
votes
2answers
360 views

How to find the cause of sudden high fuel consumption of a motorbike?

About my bike Model: Honda CBR 250R Total Run: 35000kms Total Time: 2 years 3 months Clutch Plate changed at 30k kms after an accident Engine oil, engine oil filter and air filter changed in ...
4
votes
0answers
117 views

What causes an engine idle to increase briefly?

I have an 82 Honda 450 Nighthawk motorcycle that I'm rebuilding and I need to tune/balance the carbs. I have them bench-balanced and reset the idle screw on both. Now it runs a lot better, but every ...
-1
votes
1answer
135 views

Suggestions for replacing/upgrading exhaust/silencer for a 125cc Motorbike [closed]

I have a 125cc Yamaha Gladiator SS125, which is about 3 years old. I had my stock air filter (paper-based) removed and installed a K&N conical filter about a year ago. I wanted to know if anyone ...
1
vote
1answer
361 views

Why my bike shows petrol missing before 2000 RPM in all gears?

I am using Hero Karizma R (225cc, 5 gears). Recently I feel a missing in all gear befor 2000 RPM. Sometimes my bike turn off due to this missing. Usually it happens at 1st/2nd gears. After 2000 RPM ...
-1
votes
2answers
257 views

AJS Regal Raptor cranks but won't run

I have a AJS Regal Raptor DD125E. When I push the starter switch the engine spins but no spark at the plugs. However as I release the starter switch I get a spark from the plugs on the engine overrun.
2
votes
2answers
123 views

Find the version of a motorcycle

I need to know the exact version of my motorcycle, I can't find this information on the frame nor the user manual. It's a Kawasaki ER-5 sold in October 2005 in France. I want to replace the fork oil ...
-1
votes
2answers
28 views

Bikes power is iffy [closed]

Hi I have a 03 katana and for some reason the bike won't power on anymore...I turn the key and nothing no lights nothing. I'm not sure if it's the battery or what. What should I do to trouble shoot ...
3
votes
1answer
399 views

Rear wheel wobble

I recently took my '12 Yamaha R6 completely apart when I repainted it. When I put it back together I didn't realize but I'd forgotten a washer on the swingarm axle which was causing some movement of ...
2
votes
1answer
94 views

Mounting bar end mirrors on non-hollow bars?

I bought a CRG hindsight bar end mirror but the CRG adapters and all the adapters I find online seem to be for hollow bars. But the bars on my 12 Yamaha R6 just have a threaded hole for a bolt.
1
vote
0answers
31 views

BDL primary driver inner plate install [closed]

I am for the first time ever, in the process of installing a replacement Ultima 6 speed transmission with the same make and model on my 1994 Harley Davidson softail custom trike conversion. It has a ...
2
votes
1answer
246 views

Car and bike. How to keep it in good condition when unused for two months?

I've seen this post, this one and this one. But what about a bike like a Hero Honda Splendor+? Apart from keeping the fuel petcock off, what else should be done to ensure that the bike runs fine after ...
3
votes
2answers
548 views

Why is martensitic steel used instead of grey cast iron for ATV disc brakes?

Grey cast iron has better thermal properties -- conductivity and specific heat -- lower density, better castability, and better friction than martensitic stainless steel. Why are OEM parts made of ...
4
votes
2answers
488 views

Do I need to reprogram ECU when adding custom Air filter

I was thinking of replacing the air filter of a bike into a custom free flow filter. I understand that I have to mod the exhaust to free flow as well to accompany the increase in exhaust due to the ...
6
votes
5answers
1k views

Engine on BMW G650GS 2011 does not start when it's hot

I have a rather strange problem with my BMW G650GS. In the morning, when the engine is cold, it starts fine with a single crank. There is no problem with riding, the engine works fine and never chokes....
1
vote
2answers
216 views

Can someone identify this part of the engine on a TVS Apache

I tried looking up everywhere, and this is unique to this bike. Can someone identify the below component. Looks like a pipe connecting the engine with starter motor. Close up of the engine , both ...
12
votes
3answers
2k views

What are the Advantages of a Single Side SwingArm on Motorcycles?

I have noticed that Ducatis , Honda and Triumph have bikes with a Single Sided SwingArm Much like most of the scooters. Are there any advantages of following this design , if so why are not all ...
4
votes
1answer
2k views

Scooter break-in period - Actual scientific backing or urban legend?

I don't understand the break-in periods needed for scooters/motorcycles. I know everyone says it, but I haven't found any explanation with some scientific backing to not making it an urban legend. ...