Please specify the brand, model and year in your question.

learn more… | top users | synonyms

2
votes
2answers
2k views

Weak front brake on dirt bike

After changing the air tube in my front tire and reinstalling the wheel on my Suzuki RMZ450, I noticed that the front brake lost a lot of stopping power. What caused this and what do I need to fix to ...
2
votes
2answers
348 views

Removing a nail from my tyre

I have a 2" nail in the side of my rear tyre on my motorcycle. The nail is fairly firmly stuck in the tyre but I'm not sure if it has actually penetrated it (it has gone in sideways). The damage is ...
2
votes
3answers
649 views

How do I protect chrome before there is any rust, and right after I have removed rust off of it?

I have an old motorcycle with chromed parts. Some of them look brand new, but others have rust on them. Is WD-40 good for preventing corrosion on chrome parts? Can it also be applied after removing ...
2
votes
2answers
3k views

Should I grease an axle when I replace it on my motorcycle

I have a taken the front wheel out of my motorcycle to replace the tyre. When I put the axle back in is it a good idea to grease it? If so what type of grease should I use?
2
votes
2answers
255 views

What do these compression figures mean

This is a follow up question to What are the causes of fluctuating intake manifold vacuum I have a 2005 Honda CBR600 F4i which suffers from occasional hesitation at low rpm when accelerating. After ...
2
votes
2answers
276 views

Damaged frame on my motorbike

My 10 year old Yamaha Super Tenere 750 has been off the road for a while as when I got it I learned it had had a bad crash which bent the frame. The rest all works, so I plan to take it to a garage to ...
2
votes
2answers
64 views

Something stuck inside the spark plug barrel of motorcycle

I went about changing the spark plugs on my 91' Honda CBR250RR and ran into a problem with the fourth plug. I tried inserting the sparkplug socket but it wouldn't get in there. Using my phones camera ...
2
votes
4answers
150 views

New batteries with acid at 80% charge— if I run then tend, will it bring it up to 100%?

I have read that, when you add electrolyte and acid to a new battery, it will then be at 80% of max charge. You can put the battery in your bike and it will turn. However, it's highly recommend to ...
2
votes
1answer
573 views

Installing Tachometer on bike

I have 1997 model Kawasaki 4s champion (100cc 4 stroke bike). It have no tachometer . is it possible to install new tachometer on my bike. can anyone give some advise ?. thanks in advance
2
votes
1answer
63 views

Why does the bike idle lower after balancing carburettors?

I have just balanced my bike's carburettors (they were initially way out of sync) it idles lower and seems to smoke more when I rev it (smells rich). Returning it to it's previous out of sync setting ...
2
votes
2answers
417 views

High altitude adjusment for carb 4stroke. (honda xr650l)

Hi I am having some problems with my honda xr650l (1995). During acceleration I experience a sort of stuttering loss in power. Almost the same feeling as runnning out of gas in the main tank. but the ...
2
votes
3answers
91 views

Motorcycle Recharge System Checks?

I have a 2007 V-Strom DL1000 motorcycle, whose recharge system is not recharging a new battery. I also have a multi-meter. Could someone share how I can check the recharge system without removing the ...
2
votes
1answer
114 views

Suzuku Katana does not start after an accident

I have a Suzuki Katana GSX600F. So, after an accident I was in, I rode the bike home and all was fine except a little cosmetic damage, then in a rainstorm it tipped over and after picking it up and ...
2
votes
2answers
732 views

Larger cylinder volume, but less power, how?

KTM Duke 200 which has an engine of 200 cc, and, on the other hand, Royal Enfield Bullet 350 with a 345 cc engine. I.e. Enfield has 150 cc more than the Duke. But KTM produces 25 BHP of power, whereas ...
2
votes
3answers
702 views

Honda Unicorn missing during rain and cold weather

I have a 2009 model Honda unicorn motorcycle. It's very difficult to ride during rain or cold weather, because of missing. I asked service center but they did not do anything. I have changed the CDI, ...
2
votes
3answers
4k views

2001 Suzuki Katana 600 motorcycle won't start

A few months ago I bought a used 2001 Suzuki Katana 600 with about 11,000 miles on it. I rode it without any issues for the first month or so. After that I started having occasional issues with ...
2
votes
1answer
55 views

What kind of technology is used to create this “The Self Balancing Electric Motorcycle”?

In this video , the commentator said that the vehicle uses some kind of technology to keep the Motorcycle self-balanced. That means it won't fall over even with an outside impact force. Since my ...
2
votes
1answer
80 views

Remove Dent From Steel Motorcycle Tank

I was in a motorcycle accident and when I crashed my knee dented my tank on impact. Needless to say my knee is pretty bad but my tank only has a dent in it. Is there a trick for removing a large ...
2
votes
1answer
289 views

Motorcycle heats up within minutes of driving in the traffic.

Ice cold engine of my KTM Duke 200 heats up and shoots the highest temperature and the gauge reaches the extreme within like 15-30 minutes of driving it in traffic. And the engine stops and doesn't ...
2
votes
1answer
478 views

Changing the exhaust on a motorbike

I have a Yamaha XJ6 from 2012 and I would like to change the exhaust. But I have a choice. Do I change only the muffler or the whole "line"? Other than cost what are the pros and cons of changing ...
2
votes
1answer
276 views

Kawasaki ZZR600 Model D3 - where is the fuel filter?

I've been looking for the location of the fuel filter. At first I thought it might not have one, and only the Model E ZZR's have one, because there seems to be no explicit mention of it or diagram in ...
2
votes
2answers
58 views

How to undo transmission nuts

I have an ~1986 Yamaha Ag 200 and I've been pulling it apart as a bit of a hobby to understand a bit more about how it works and hopefully in the end get it going. I've opened it up so some gears ...
2
votes
1answer
163 views

Motorcycle: Way to stop plastics fading?

I have a 13yo motorcycle that has a black plastic instrument panel. Although it is not regularly exposed to the sun the black plastic is fading to a chalky white. I was wondering if anyone knew of a ...
2
votes
3answers
6k views

Squeaking brakes on motorcycle - an issue or not?

The front disc on my motorcycle emits a low pitch squeaking noise when I'm pulling up to a complete stop (almost like the sound train brakes make when pulling up to a station). This only happens when ...
2
votes
2answers
299 views

Maintainance of shock absorber

I have a 125cc bike. My cousin uses my bike more than me. He is more than 110 kg in weight. So I feel that my bike's shock absorbers will be break down soon because of my cousin. So is there any ...
2
votes
1answer
460 views

Comparing v-twin with straight-four engines

This isn't really on-topic for "motor vehicle repair", but I figure it's kinda close. A few months ago, I bought a 1983 Honda Nighthawk 550, which has a straight-four engine. A friend of mine was ...
2
votes
2answers
766 views

Motorcycle 125cc question about PISTON condition and battery

Last year I bought a 125cc bike Modenas brand, most likely unknown to you. It is a moped. http://www.modenas.com.my/v2motorcycle.asp?id=70 It can go as fast as 110 km/h enough for the city and not ...
2
votes
1answer
1k views

Burned regulator/rectifier

I have managed to completely fry regulator/rectifier on my Suzuki GSR600 (K7). I suspect that it happened when I blindly splashed into a big water pond, so some water probably got on connector. Thing ...
2
votes
1answer
42 views

What is Total litres (reserve, usable)15 litres (3.2 litres reserve, 2 litres usable)?

I bought a new bike(Pulsar 150), and while reading its specs in the user manual i found Total litres (reserve, usable) = 15 litres (3.2 litres reserve, 2 litres usable). what does this mean, I assume ...
2
votes
3answers
94 views

Can I put a regular lead acid battery in place of a gel battery in a BMW R110RT?

I just got a 2000 BMW R1100RT and the previous owner told me the battery is 7 years old so I figure it's time to go. I saw this video https://www.youtube.com/watch?v=XEBjekqUV9c and the guy points ...
2
votes
1answer
486 views

Bike is sometimes not wanting to shift into neutral

I have a 1982 Suzuki SP250. The bike "doesn't want" to shift into neutral sometimes. I have to rock it back and forth and shift up and down the gears a for a while before it shifts. I have changed the ...
2
votes
1answer
225 views

How to determine what carburetors will be compatible with a motorcycle?

What are the parameters to determine whether or not motorcycle carbs are compatible with a certain engine? Is it just the size? For example, I have a 1978 Suzuki GS1000 with Mikuni carbs, and it's ...
2
votes
1answer
1k views

2 week old disk brake pads rubbing on rotor. Is this OK? (motorcycle)

I got the pads on the front brake of my bike replaced 2 weeks ago. Immediately I heard a rubbing noise at low speed. I thought this would be ok - that the pads just had to be worn in or something, but ...
2
votes
1answer
449 views

Why don't motorbikes have chain covers?

I notice that except for small commuter bikes and older bikes (before the 80s), hardly any of the larger and/or sportier bikes have covers to protect their chains: . They seem quite practical, and ...
2
votes
1answer
2k views

Motorcycle gears seem really stiff and hard to shift when cold

So I have noticed that even for a fruther 10 to 15 mins after warm up, the gear lever on my motorcycle (bought brand new - 6 months old) seems really stiff and harder to change. COuld this have ...
2
votes
1answer
510 views

What can cause gas to blow back into air filter in a motorcycle

I have a 1987 kawasaki ninja. I've had it for two years and it ran good until this year. When I started it this week, gas started to flow back into air filter box. Has anyone ever encountered this? ...
2
votes
1answer
3k views

What is the correct way to clean and lubricate the chain of a Yamaha FZ 16?

I own a 2011 Yamaha FZ 16 bike; which has an open chain; occasionally dirt gets accumulated to the chain and despite my many attempts I am unable to properly clean the chain. Also could you also help ...
2
votes
1answer
52 views

Axle nut sizes on a 2001 Honda Shadow

It seems that the axle nut on a 2001 Honda Shadow are different sizes on either side of the bike. What size are these so I may get the correct wrench to work with them. I have tried other sources ...
2
votes
4answers
195 views

Fuel meter on Yamaha TZR 50/125

I have my eyes on my childhood dream, Yamaha TZR 125. But, as it turns out, this motorcycle doesn't have any type of fuel meter. And, I'm pretty sure, it doesn't have any sensor for it too.. ...
2
votes
1answer
180 views

Pulsar 150 drifts right side

3 years old, 25000km done. The main problem is that the bike pulls or drifts towards the right side. I took it to the original service centre where they said the front fork bent and they overhauled it ...
2
votes
2answers
80 views

GSX-R front suspension technology timeline

I have noticed that people frequently choose the GSX-R front end for a front end conversion on old bikes to improve handling and comfort. The GSX-R was produced from 1985 through the present, and I'm ...
2
votes
1answer
84 views

What is the right way to attach the Micarb to the engine head of my Enfield Bullet 500?

Before an upgrade to a new Hitchcock conical air filter, the carburetor was held in place by both the original (massive) air filter and the rubber manifold attached to the engine head, and it was ...
2
votes
2answers
269 views

Ducati ST4s not starting

I ride a 2002 ST4s that was bought new in 2008 and has now travelled 8800km. I have fitted a power commander and carbon mufflers and done some minor alterations to the air box. Spent some time setting ...
2
votes
1answer
206 views

Dirt bike silencer core cracked/rusted

After removing and disassembling my FMF Factory 4.1 dirt bike silencer, I saw that the inner core was cracked and extremely rusty (having the potential for more cracks). I definitely want to fix this ...
2
votes
1answer
808 views

How do I clean/grease my dirt bike steering bearings?

My dirt bike's steering has become increasing harder to steer. Other dirt bikes I've ridden have much smoother, almost effortless, steering. How can I have that same smooth steering? What parts do I ...
2
votes
1answer
272 views

Squeal (vacuum leak?) and high idle after rebuilding carbs on '82 Yamaha XJ 750 Maxim

I've got an '82 Yamaha XJ 750 Maxim. I rebuilt the carburetors this weekend, and after putting it back together, it seems like it's got a vacuum leak. There's a loud squeal every time a cylinder ...
2
votes
1answer
273 views

Motorcycle: Irregular brake bite (front single disk)

My motorcycle's front brake is giving a irregular bite. I don't know how to express it in words pleas check the below illustration --------$^^^^^^^^-^-^-^-^-^^--^^^---^^^^^^----^^^| ~60Kmph ...
2
votes
1answer
558 views

Looking for Tyres for Pulsar 150 bike with 180cc engine

I have a pulsar 150 bike modified with 180cc engine. I am looking for tyres(both from and rear). The tyre should have have good cornering capability and a very good grip. Till now I have. I looked at ...
2
votes
1answer
276 views

What do I need to put rear shocks on my 1982 Yamaha Maxim XJ 750?

I bought the bike and didn't notice the previous owner had taken the rear shocks off (worst oversight I ever made, kicking myself now). I want to put some shocks on it, but I'm not really sure what I ...
2
votes
1answer
673 views

How reliable is a Honda GB400 (motorcycle) grey import?

I am considering getting a 1985 Honda GB400TT bike as I simply love the look of them and they seem to be selling at a good price. I understand these are grey imports (imported 2nd hand from Japan) ...