Please specify the brand, model and year in your question.

learn more… | top users | synonyms

2
votes
1answer
811 views

2 week old disk brake pads rubbing on rotor. Is this OK? (motorcycle)

I got the pads on the front brake of my bike replaced 2 weeks ago. Immediately I heard a rubbing noise at low speed. I thought this would be ok - that the pads just had to be worn in or something, but ...
2
votes
1answer
347 views

Why don't motorbikes have chain covers?

I notice that except for small commuter bikes and older bikes (before the 80s), hardly any of the larger and/or sportier bikes have covers to protect their chains: . They seem quite practical, and ...
2
votes
1answer
2k views

Motorcycle gears seem really stiff and hard to shift when cold

So I have noticed that even for a fruther 10 to 15 mins after warm up, the gear lever on my motorcycle (bought brand new - 6 months old) seems really stiff and harder to change. COuld this have ...
2
votes
1answer
415 views

What can cause gas to blow back into air filter in a motorcycle

I have a 1987 kawasaki ninja. I've had it for two years and it ran good until this year. When I started it this week, gas started to flow back into air filter box. Has anyone ever encountered this? ...
2
votes
1answer
1k views

Burned regulator/rectifier

I have managed to completely fry regulator/rectifier on my Suzuki GSR600 (K7). I suspect that it happened when I blindly splashed into a big water pond, so some water probably got on connector. Thing ...
2
votes
1answer
45 views

Downsides to using an adapter allowing me to use car oil filter on motorcycle?

I saw this video recently on adding an aftermarket oil filter adapter to my motorcycle. Are there any downsides to using this type of product? Should I have a concern about using a car oil filter on ...
2
votes
1answer
33 views

Trying to understand the cause of the leak?

I am preparing to jump into a change of my stator (generator) on a 2007 DL1000 Suzuki V-Strom. I saw something unusual on the outside of the box, can anyone determine whether this might indicate a ...
2
votes
4answers
129 views

Fuel meter on Yamaha TZR 50/125

I have my eyes on my childhood dream, Yamaha TZR 125. But, as it turns out, this motorcycle doesn't have any type of fuel meter. And, I'm pretty sure, it doesn't have any sensor for it too.. ...
2
votes
1answer
68 views

What is the right way to attach the Micarb to the engine head of my Enfield Bullet 500?

Before an upgrade to a new Hitchcock conical air filter, the carburetor was held in place by both the original (massive) air filter and the rubber manifold attached to the engine head, and it was ...
2
votes
2answers
202 views

Ducati ST4s not starting

I ride a 2002 ST4s that was bought new in 2008 and has now travelled 8800km. I have fitted a power commander and carbon mufflers and done some minor alterations to the air box. Spent some time setting ...
2
votes
1answer
163 views

Dirt bike silencer core cracked/rusted

After removing and disassembling my FMF Factory 4.1 dirt bike silencer, I saw that the inner core was cracked and extremely rusty (having the potential for more cracks). I definitely want to fix this ...
2
votes
1answer
606 views

How do I clean/grease my dirt bike steering bearings?

My dirt bike's steering has become increasing harder to steer. Other dirt bikes I've ridden have much smoother, almost effortless, steering. How can I have that same smooth steering? What parts do I ...
2
votes
1answer
213 views

Squeal (vacuum leak?) and high idle after rebuilding carbs on '82 Yamaha XJ 750 Maxim

I've got an '82 Yamaha XJ 750 Maxim. I rebuilt the carburetors this weekend, and after putting it back together, it seems like it's got a vacuum leak. There's a loud squeal every time a cylinder ...
2
votes
1answer
195 views

Motorcycle: Irregular brake bite (front single disk)

My motorcycle's front brake is giving a irregular bite. I don't know how to express it in words pleas check the below illustration --------$^^^^^^^^-^-^-^-^-^^--^^^---^^^^^^----^^^| ~60Kmph ...
2
votes
1answer
495 views

Looking for Tyres for Pulsar 150 bike with 180cc engine

I have a pulsar 150 bike modified with 180cc engine. I am looking for tyres(both from and rear). The tyre should have have good cornering capability and a very good grip. Till now I have. I looked at ...
2
votes
1answer
207 views

What do I need to put rear shocks on my 1982 Yamaha Maxim XJ 750?

I bought the bike and didn't notice the previous owner had taken the rear shocks off (worst oversight I ever made, kicking myself now). I want to put some shocks on it, but I'm not really sure what I ...
2
votes
1answer
614 views

How reliable is a Honda GB400 (motorcycle) grey import?

I am considering getting a 1985 Honda GB400TT bike as I simply love the look of them and they seem to be selling at a good price. I understand these are grey imports (imported 2nd hand from Japan) ...
2
votes
1answer
49 views

Four-body carbs regulation.

I would like to adjust four-body carbs by myself, in order to avoid spent money every time. What are the basic rules, tools and secrets of many body carbs regulation?
2
votes
0answers
57 views

Head Lamp on Honda Shine

I'm planning to change/modify the Headlight bulb. kindly suggest. My bike (Honda Shine) has 12V 3AH(MF) Battery & Head Lamp 12V 35W/35W halogen bulb. In rainy season & city Bye-pass roads the ...
2
votes
0answers
87 views

Bike is sometimes not wanting to shift into neutral

I have a 1982 Suzuki SP250. The bike "doesn't want" to shift into neutral sometimes. I have to rock it back and forth and shift up and down the gears a for a while before it shifts. I have changed the ...
2
votes
1answer
29 views

Axle nut sizes on a 2001 Honda Shadow

It seems that the axle nut on a 2001 Honda Shadow are different sizes on either side of the bike. What size are these so I may get the correct wrench to work with them. I have tried other sources ...
2
votes
2answers
242 views

Motorcycle dies while riding in cold

I have a 2008 Suzuki Intruder (VL250) that is really struggling to run in the cold weather. It stalls and dies, loses power while riding, and dies while waiting at the lights. When I warm it up, even ...
2
votes
1answer
55 views

GSX-R front suspension technology timeline

I have noticed that people frequently choose the GSX-R front end for a front end conversion on old bikes to improve handling and comfort. The GSX-R was produced from 1985 through the present, and I'm ...
2
votes
1answer
74 views

Motorcycle tire shopping confusion

I'm having a hard time choosing a tire for my bike ('11 Yamaha FZ8n). The main source of my confusion are very similar markings on a multitude of tires that don't make a lot of sense to me. I was ...
2
votes
0answers
119 views

Motorcycle: Fuel Injection light comes on after 5 mins of riding

I've bought a brand new bike and have had it for about 2 months. Later this week I noticed that after about 5 mins of riding the Fuel Injection light comes back on. I stop the bike, turn the ignition ...
2
votes
0answers
442 views

Clutch dragging and making squeaking/grinding noise

My motorcycle clutch (Yamaha Diversion) has recently started dragging extremely badly; I need to rev-match up and down gears and shifting from neutral into first requires me to rev the engine, pull ...
2
votes
3answers
1k views

Motorcycle: Honda VTR 250 difficulty starting

I have a 2000 model Honda VTR 250. Up until now the bike has been super reliable. However, recently it has been struggling to start in the morning. The engine turns over many times before catching and ...
1
vote
2answers
3k views

Why bikes with gears are preferred when there is gearless(or automatic gear) technology?

I know that lower gears have higher acceleration & low top speeds and higher gears have low acceleration & higher top speeds. But I would like to know why this gear system was designed first ...
1
vote
5answers
3k views

How fast should a Honda CBR 600 F4i idle when the engine is cold

My CBR 600 F4i idles at about 3000 rpm when the engine is cold, after about 2 to 3 minutes when the engine warms up, it settles back down to regular idle speed of about 1300 rpm. Is this normal for ...
1
vote
3answers
61 views

How do I protect chrome before there is any rust, and right after I have removed rust off of it?

I have an old motorcycle with chromed parts. Some of them look brand new, but others have rust on them. Is WD-40 good for preventing corrosion on chrome parts? Can it also be applied after removing ...
1
vote
3answers
4k views

Which relay to use for bike headlight

I have Bajaj Pulsar 180 UG4, it has a 35 watt HS1 Helonix headlamp bulb. I want to upgrade the stock headlight to make it brighter, so I found H4 Xenon bulb 60/65 watt. I asked this question question ...
1
vote
2answers
128 views

Are engines of the same model bike identical?

I am planning to buy a Yamaha Crux from the showroom. I'd like to know how to compare the engines in each of the available bikes of the same model. Will they differ in any way? One mechanic I know ...
1
vote
2answers
125 views

What minimum maintenance should I do to get my cycle to a shop where it can be looked over professionally?

It's been in the garage all winter. It starts, but I'm nervous about getting it to a mechanic (about 10 miles away). It's a 2007 Honda Rebel 250cc. I have zero maintenance experience. None. A couple ...
1
vote
2answers
1k views

Exhaust Flame Kit

I have been searching over the past week or so trying to educate myself as much as possible before going ahead and trying to build an exhaust flame kit from scratch (the ones on sale on the internet ...
1
vote
3answers
240 views

Frequency for servicing bike?

I have a Hero Honda air cooled single cylinder 4 stroke engine bike. It's about 5 years old, and I've done all the recommended servicing on time. I lost the servicing manual, but I remember that the ...
1
vote
2answers
2k views

Motorcycle engine running a bit hot?

For the past few rides, I think my 2007 Ninja 250 has been running hotter than before. At least, I think it feels hotter through the seat, but the oil temperature gauge seems to be pointing pretty ...
1
vote
1answer
29 views

''Tire air leaking sound''

I have yamaha SZR bike. It is making weird sound lately. It is making ''tyre air leak sound'' but it is not certainly from the tire. It makes sound after 20-30 minutes interval. Im far from service ...
1
vote
3answers
101 views

Should my motorcycle wheels be two different size diameters?

I've heard that a larger wheel (diameter) in the front can produce quicker turns on a motorcycle. How much larger should a front wheel be than a rear wheel on a road bike (if at all)? Will this affect ...
1
vote
1answer
975 views

50cc Two Stroke Scooter/Motorcycle - Idle and start issues

this is my first motor-vehicle ever, a Simson s50 from 1976. Things seem to be running fine, but there are two problems I need to figure out: 1) The engine dies unless rev'ed constantly - eg at a ...
1
vote
1answer
1k views

What is wrong with my 99 gsxr 600 when my regulator keeps burning out?

I recently had my clutch replaced and a new battery put in. Within a month my regulator/rectifier burnt out of it. So, I purchased a new one. After 2 weeks that one burned out also. I replaced the ...
1
vote
2answers
682 views

Fuel usage change from 250 CC to 900 CC

I'm currently driving a Honda Hornet 250 CC (because it's the engine size limit on a provisional license in New Zealand). Once I get my full license I want to get something bigger, possibly a Honda ...
1
vote
2answers
721 views

Motorcycle starter sometimes clicks, but doesn't start - tapping with hammer helps it start

It seems to happen particularly when the bike is hot. But sometimes when I go to start up the bike, the solenoid will click, but the starter won't turn over. Tapping the starter with a hammer always ...
1
vote
3answers
99 views

Is it important to get “K” work done by a dealer?

Several of the line-items in my motorcycle's maintenance schedule are marked "K", for "Should be serviced by an authorized Kawasaki Dealer". Example items are "Brake fluid--change" and "Steering stem ...
1
vote
2answers
358 views

Are the brake/clutch levers on a (pre-2008) Ninja 250 supposed to be symmetric?

I bought a used 2007 Kawasaki Ninja 250R a couple months ago. I had a mechanic check it out first, and I've been riding it since with no issues. The other day I noticed that the brake lever seems to ...
1
vote
1answer
73 views

Using an open vs closed clutch cover on a motorcycle with a dry clutch

A common modification I've seen on motorcycles with a dry clutch is to replace the closed clutch cover with and open one. Besides the visual and auditory differences, will I notice any other ...
1
vote
1answer
108 views

My motorcycle won't start at all why?

Something is draining my battery and my bike won't start. If it's the relays which one is it? My motorcycle doesn't crank at all. it makes a buzzy noise when I press the start button. It sounds like ...
1
vote
1answer
74 views

Do motorcycle covers work for cold weather?

I'd like to know if covers work well for motorcycle in cold weather, for example -20C. If not, is there an alternative option, assuming garage is not available?
1
vote
2answers
705 views

Yamaha Vstar 250 won't start: need to diagnose and fix possible fuel, battery, or flooded carb

My riding experience: 1 day. Already I'm an idiot. This will probably be a good laugh for most of you. I purchased a used bike, Yamaha VStar 250, <2,000 miles, <4 years old. Battery has not ...
1
vote
2answers
141 views

How can I check if my motorcycle's suspension is working correctly?

How can I check if all of my motorcycle's suspension parts are working correctly, and carrying an even load?
1
vote
1answer
1k views

Motorcycle Front Forks: Fork tube stuck in bottom pipe - clunking sound when trying to remove

I'm rebuilding the forks on my CB400 project bike [ turning into a street tracker ;) ] The process from the manual is pretty straight forward: 1) Remove the front fork bolts and drain oil 2) With ...