Japanese carmaker known for a variety of small hatchbacks, and the ever-popular mx5/miata sports car

learn more… | top users | synonyms

3
votes
1answer
34 views

Steering Problem on Mazda 3

I have a very odd problem with my steering on my 08 Mazda 3 Takara. I've had it since January now and to be honest have never been happy with the steering. I've got a couple of problems with it: 1) ...
1
vote
2answers
16 views

Incorrect odometer reading after replacing instrument cluster?

I recently had a garage do work on my 95 Mazda B2300 during which they replaced the faulty instrument cluster. When I dropped it off at the shop, it had approximately 170k miles on it. After they ...
1
vote
1answer
20 views

Car shaking on startup

My car has been shaking on start-up. The check-engine light has been on/off periodically. When I originally took it in, my mechanic replaced a sensor (and a whole bunch of other stuff not related to ...
2
votes
0answers
36 views

Rust Repair Advice

I have acquired a 2005 Mazda 3 sedan.Its a nice little car, aside from the atrocious amount of rust on it. The rust originated in the wheel wells, and that's where most of the rust actually is. ...
2
votes
2answers
47 views

1993 Mazda MVP gets hot only when pressing on accelerator

We have replaced hoses and water pump and have had no problem with it getting hot. In the past week it has started to get hot, not overheated. It only happens after driving on highway when pressing ...
0
votes
3answers
115 views

Should I Replace my Thermostat? If yes, how?

Earlier this year, I had my CEL come on on my '05 Mazda 3 due to P0128 (asked about here). I cleared the code, and it never came back. Six months later, I have the code P0126 come up and now I'm ...
4
votes
3answers
2k views

Car runs uneven and jerky, but why? (Mazda 626)

I have a Mazda 626 (sedan) -97 and lately its been running uneven and jerky. Have had in in for repairs and changed battery, oil+filter and spark plugs. Still had problems and tried to use a engine ...
1
vote
1answer
10 views

1996 mazda 626 leaking coolant

My mazda 626 was leaking coolant. I replaced the radiator for there is clearly a hole on it. It worked fine for about a month. Then I see some leakage again. And this time it is around the right side ...
6
votes
4answers
12k views

Sputtering while driving & idling

[My car: 2004 Mazda 3] So, my wife came home from running some errands and told me the check-engine light was on and that the car was sputtering and felt like it was going to stall while stopped at ...
1
vote
3answers
3k views

Mazda 3 on acceleration drops engine power

I'm having this problem for some time now. Usually in 2nd (and mostly 3rd) and higher gears, when gas pedal is completely pressed to the end, the car is accelerating, but when it reaches about ...
2
votes
1answer
41 views

Lights turn on randomly on Mazda 323

I have a 1994 Mazda 323 that's in great shape except for in the last few months the car has started to turn on both turn signal lights at random times, draining my battery. If I catch it in time, ...
0
votes
0answers
62 views

Rear coil spring replacement Mazda 3

So my mazda3 has about 130k miles on it - it's a 2007 2.0L. I've already replaced the rear coil springs once about 3 years ago because they were snapped (had a shop do it, and I'm probably not going ...
0
votes
2answers
37 views

How to repair a temperature gauge?

The temperature gauge in my 1996 Mazda 626 has been dead for as long as I have had the car (years). I never bothered to fix it because the car seemed fine. I recently had an issue where I discovered a ...
3
votes
1answer
60 views

A/C clutch turns on and off frequently

I have 2011 Mazda CX7. When I first turn the car on I can see the A/C clutch being engaged, but after the car runs for bit, then clutch disengages. After a while it starts to engage for few seconds ...
-1
votes
2answers
20 views

2000 mazda MPV 6 cylinder LX

Cylinder 4 shows misfire.Have changed plugs and still it comes on occasionally. Car only has 90,000 miles.I have taken to dealer who want to charge $2500 to rebuild the engine. They kept the car ...
1
vote
1answer
36 views

Cruise Control Master Switch

2012 Mazda 3 I use cruise at every opportunity. I leave the system "on" permanently, then engage the accele/resume/cancel buttons as needed. Does leaving the system in the "ready" mode like this ...
1
vote
1answer
35 views

Turn signal not returning to neutral

I am considering buying a 2005 Mazda 3i. One of the problems with the car is that, when turning right, the turn signal does not return to neutral on its own, you have to do it manually. What part ...
2
votes
1answer
305 views

Mazda 3 2004 Engine Revving when car not moving

I recently noticed when my car comes to a stop engine running and ac on the engine revs as if it wants to move forward. The rev isn't huge. When i am in traffic and holding down on the brakes, if i ...
1
vote
0answers
21 views

Compatible wiper linkage or transmission mechanism for Mazda 323 Familia, 1995 model (sedan)?

I can't find the wiper transmission/linkage mechanism for Mazda 323 familia, 1995 model (sedan). As a result I am looking for one that is compatible. So the question is, what wiper ...
1
vote
2answers
48 views

P0442: Faulty EVAP System

After seeing my CEL come on in my '05 Mazda 3 (just passed 100K mi.), I used my code reader to find out that the code was P0442. So I naturally came to this website to see what I could find on the ...
0
votes
0answers
48 views

Car wouldn't start apparently due to weak battery, but did start after I added coolant

I know there is a leak somewhere in the cooling system of my 1996 mazda 626. It is an old car, and I just keep adding coolant every two days. This morning, I was not able to start the car. It looked ...
4
votes
5answers
4k views

Uneven rotation sounds when my car gets to 50-60 MPH

My 2005 Mazda 3 with 73K miles (roughly 20K on the tires) on it starts to make a sound, just like your washing machine does when all of the clothes go to one side and its still spinning, when I get to ...
3
votes
3answers
2k views

Brake pedal goes all the way to floor, after ABS was activated

Hopefully someone can point me in the correct direction, or at least give me an idea about this before taking it to the shop. The other night I was driving around, streets were pretty snowy around ...
2
votes
2answers
109 views

Improve engine sound of Mazda RX-8

I would like my 2006 Mazda RX-8 Shinka to be a little louder. I just don't know where to start though. The engine has such a nice sound, but I can't really hear it. I don't want it to be so loud that ...
3
votes
8answers
8k views

1999 Mazda 626 Shakes when Idle

I've got a 1999 Mazda 626 that shakes really badly when idling. It gets a little better when put into neutral, but not much. I've had two people suggest possibilities: Fuel filter Vacuum hose ...
4
votes
1answer
78 views

How can I lock keys inside 2007 Mazda6?

I am getting my car towed to a location for me to pick it up at a later time. I have a spare key and want the driver the lock the other key in the car. Unfortunately technology is getting in my way. ...
2
votes
1answer
1k views

Do I need to replace the A/C Clutch, A/C Relay, or A/C Belt?

My '05 Mazda Tribute (just over 200,000 miles) is having problems with the A/C. A while back it was the freon according to the previous owner. I connected a pressure gauge to the low pressure end of ...
4
votes
2answers
604 views

Did slamming on my brakes really fix them?

I have a 2006 Mazda 3 that until yesterday, had soft/spongy brakes. A few days ago I brought it to my local repair shop to take care of the problem, and $300 later, I had new front pads and machined ...
3
votes
1answer
212 views

Front Windshield Sprayer Problem - 2005 Mazda 3

Driving home the other day, my front windshield washer sprayers stopped working. At first, just the passenger side nozzle sprayed, which led me to believe it was just ice on the other one. However, ...
3
votes
2answers
199 views

Should I connect the “power antenna” wire to the “auto antenna” wire?

I have a new radio (Clarion cx501) for my 2005 Mazda 3. I bought a special wiring harness to make the installation easier. I have two wires that I'm not sure if I must connect. They look like the same ...
2
votes
1answer
52 views

2001 Mazda Protege — Battery Charge Problems

For the past year or so, I've had to manually charge the Protege's battery before going anywhere, every single day. Either the battery is not "holding its charge" or there's a component that's ...
0
votes
0answers
24 views

My 2009 Mazda2 splutters when starting up

My Mazda splutters for about 5 seconds then kicks into life. It's very intermittent. Also, during the spluttering, the speedometer indicator hand flashes the whole way around the dial. There are no ...
1
vote
1answer
68 views

Why is the antenna on the Mazda5 off-center?

Does anyone know why the antenna on the Mazda5 is not centered on the back of the vehicle?
3
votes
1answer
44 views

Sputtering Mazda

I have a 1996 Mazda Protege. Left for 3 weeks, came back and car is sputtering. Was very cold while sitting, below 0 at times. Ethenol in gas doesn't seem to be helping. Could there be ...
2
votes
1answer
138 views

How to replace an alternator?

I've got an '05 Mazda 3 SP 2.3 and my question is how do I replace my alternator? My situation is pretty much the exact same as described on this site: ...
2
votes
1answer
62 views

Series of troubling electrical problems in my '07 Mazda 3. Any ideas?

I'm having a series of what I will call electrical problems with my Mazda 3. I'm not sure if they are interrelated and wanted to get some advice or ideas from you guys. Apologies in advance for the ...
0
votes
4answers
540 views

After ABS engages, brakes go soft for 10 minutes or so?

I have an 06 MAzda 3 .. problem: After ABS engages, brakes go soft, and travel much further (75%) to the floor before stopping.THey do function well just way to low to the floor. This was not always ...
1
vote
0answers
35 views

How to fix “lazy” electricity to the cab of an '89 Mazda B2200

I don't know how else to describe it but as "lazy". There's power to the speedometer/temperature/fuel portion of the dashboard, but nothing else in the cab has power, including the interior light. ...
0
votes
0answers
114 views

Does the 2013 Mazda CX 9 gs have the Navigation SD Card slot?

I see a lot of SD cards for Sale on eBay which say they will add navigation to a CX 9. I am considering buying a CX 9 GS without navigation and am wondering is the SD card really all that is needed to ...
1
vote
1answer
42 views

How to unlock all doors with the key on a 2006 Mazda

If I turn the driver-side door key clockwise, release it, and turn it clockwise again, all the doors on the vehicle lock. However, if I turn it counter-clockwise, release it, and turn it ...
3
votes
3answers
4k views

Clanging in back of Mazda 3

I have a 2007 Mazda 3 sedan with ~100,000 miles on it (it's the 2.0L version). Last October, I noticed a significant clanging noise that was coming from the rear of the vehicle whenever I went over ...
2
votes
2answers
49 views

What is a good strategy for adding performance upgrades in phases to a 2013 Mazda 3?

I have a 2012 Mazda3 s (manual transmission, base engine) to which I'd like to begin adding more performance-oriented parts once the OEM parts begin to degrade. However, I am not the kind of person ...
0
votes
1answer
39 views

Radiator and coolant ports

I think I have a leak in my radiator because water came pouring out from under my car mazda 6s 2002. The only thing is when I opened my coolant cap it was still full. What could be the problem
2
votes
1answer
227 views

Can a Hydraulic clutch be adjusted?

The biting point on my Mazda 2's clutch is very, very short and the car is uncomfortable to drive. Car is still under warranty, but the mechanic advised that it could not be adjusted and all Mazda 2 ...
4
votes
2answers
190 views

Intermittently sticky caliper

This is a front caliper on a 03 Mazda protege. The right brake overheated the other day. I tore it apart and one of the caliper bolts was pretty rusted. I got a new bolt, pads and greased the ...
6
votes
1answer
1k views

Second key for Mazda5 2013 - programming vs cloning, 80 bit vs 40 bit

I have Mazda5 2013 with a single key, so I am trying to get a spare (at least one) I have the part number ( G2YA-76-2GXB ) - dealer would charge $50 for the key plus $70 for the programming There ...
3
votes
1answer
200 views

Mazda 3 (2006) passenger seat will not recline anymore

I have a Mazda 3 (2006) and the passenger seat will not recline anymore. I can reach under and feel that a wire which I believe should be 'pulled back' is loose. Pulling it does nothing so (does not ...
3
votes
4answers
435 views

Front-end metallic vibration noise - poorly lubricated brakes?

I have a manual-transmission 2008 Mazda 3 I. For the past day or two, I have detected a somewhat quiet metallic vibration noise coming from the front-end of my car. Some things I have noted: The ...
3
votes
3answers
1k views

How do you troubleshoot cruise control? (Mazda Tribute 2005)

I just bought a used 2005 Mazda Tribute. The only problem I have with the car is that the cruise control doesn't work....and I have no clue how/where to start! The cruise light on the dashboard ...
2
votes
1answer
143 views

Front grill electrical component near radiator

I have a 2008 Mazda 3, and unfortunately I ran over some road debris (probably a tire or something, I didn't get a good look at it). My local Mazda dealer checked it out and said there was nothing ...