So, it's fairly popular consensus online that it's red/positive clips to the positive/red posts, then the black/negative clip to the frame One site mentions sparks, but you'll still get a spark when ...
Most of the advice I've seen for jump starting cars instructs to connect the black wire to a bare piece of metal on the car with the dead battery. However, I've always just hooked up both poles to the ...
This weekend, during a camping trip, the starter battery on my 2001 VW Eurovan camper started to show signs of weakness - cranking was much slower than usual and took about 5 attempts to get the ...
The car has powerful new battery (1 week old). I drove the car and after 4 hours, the car will not start, not even click when you try to start the car? All the lights are ok and they are not dim. What ...
When jump-starting a vehicle, one first connects the positive and negative terminals between the two cars: positive to positive and negative (good battery) to a bolt head on the vehicle with the dead ...
This post explains why it's a potential hazard to clip to the negative post on the dead battery when giving a boost. But I've also been told that I could damage the electronics in my own car if I give ...