Internal Combustion Engine. Most engines in road going vehicles are 4-cycle internal combustion gasoline engines.

learn more… | top users | synonyms

1
vote
1answer
130 views

1981 amc concord won't start

I have a 81 amc concord. I drove it and it died and went to start it again there was nothing. Replace starter battery and starter relay. There is no headlights no buzzer no radio no dome light. Any ...
4
votes
2answers
2k views

Troubleshooting a Misfire

Car: 2005 Dodge Grand Caravan In the past few days I started to feel the engine stumble. Yesterday the engine light came on and the error was a that cylinder 4 was a misfire (there was also a ...
-1
votes
2answers
435 views

The disadvantages of mitsubishi lancer 2007 [duplicate]

I am planing to buy a new car that has to be good enough to be used everyday . I have tried the speranza and the brilliance but weren't good and not reliable to be used everyday . Many friends ...
5
votes
3answers
2k views

Why are drive by wire systems so unresponsive?

Purchased a honda Fit seeing their reasonable price and good engine power. However I have a lag between me pushing the pedal and the engine responding. I constantly have to downshift to get any power ...
3
votes
2answers
998 views

Mini Cooper P1638 code

I have a 2007 Mini Cooper. It keeps throwing code P1638 on my code reader on these really really cold mornings, and the engine seems to search for idle, reving betwween 500RPM and 1400RPM. The car ...
3
votes
2answers
950 views

Going more than recommended Speed in Break-in Period

I have a new Yamaha motorbike. Seller told me not to ride speed more than 50 Kmph for first 1000KM but I rode it 60 for 10 - 15 minutes due to some reason. How does it affect to my Motorbike ?.
1
vote
1answer
271 views

How to spot remove high temp engine paint?

I've recently painted an engine post reassembly, due to cost reasons. No doubt I've encountered overspray on certain parts. I know sandblasting the engine proper is a huge no-no, and soda blasting ...
2
votes
1answer
124 views

Engine Whine Problem

I have a 2000 Ford Explorer V6 4.0, manual. I bought it brand new and have put just over 175,000 miles on it. I was driving down a dirt road to my home and noticed what sounded almost like a hissing ...
1
vote
2answers
466 views

Proton jumbuck loss of power/shaking

I was driving to work this smorning when my car started shaking and losing power no matter how much I put my foot down after about 2km of driving it started working fine again but the engine has a ...
3
votes
1answer
14k views

How much does displacement affect performance?

I'm interested in learning more about the steps that can be taken to increase the performance of an engine. I'm curious how much displacement affects performance. For example, compare the following ...
2
votes
2answers
360 views

What does CC refer to when describing an engine?

I have been learning about various older cars on Wikipedia. I've always wondered what the "cc" refers to in the engine description. For example: 1964–1969 Porsche 911: 1991 cc 1965-1969 Porsche 912: ...
5
votes
3answers
3k views

Cylinder 1 and 4 has low compresion, after engine has been redone

I have a Opel Corsa 1999 B type. We had a mechanic redo the engine about 4 months ago, but this week it just does not want to start. Today had other mechanic look at the engine, and did a quick ...
4
votes
2answers
263 views

Can I use a CNC machine or waterjet to make an adapter plate to adapt a 5 speed transmission to a rare, obsolete engine?

I am the sad, proud owner of a Nissan SD33T (Diesel), mated to a 4 speed T-19. The power this engine outputs (101HP, 160#/TQ stock) means it struggles on the highway, and I don't want to sacrifice my ...
2
votes
3answers
162 views

When should we change the machine lubricant? Cold engine or hot engine?

According to the manual, we should change the lubricant when the engine is still hot to easy the lubricant flow out completely. But from other perspective, loosening the bolt at the high temperature ...
2
votes
1answer
137 views

drove without #3 cylinder plug wire. Help!

I drove without a spark plug wire in my 1978 GMC Sierra 5.7L. It drove fine and I didn't notice any problems until it died after about 2 miles. It was acting as if it was out of fuel or power when it ...
2
votes
2answers
169 views

1997 ford f150 lariat

We have a 1997 ford f150. My husband replaced the thermostat, but it still reads cold and doesn't put out any heat. Any suggestions? We are in Ohio, it's December, and it's freeeezzzing - need heat! ...
5
votes
4answers
1k views

Engine repeatedly dies at shorter and shorter intervals this cold morning, finally won't start

I have Pontiac Grand Am 2004. It's been needing some regular maintenance, but other than that runs mostly fine. When I went out to start it this morning, it started fine. I went to start brushing snow ...
4
votes
3answers
7k views

Slower Engine Start When “Cold”

I have a 2012 Honda Civic EX (4 Cyl Automatic, 5-speed transmission, Regular Gasoline). I get it serviced regularly and it has around 28k miles. The engine light has never come on. I am noticing this ...
2
votes
2answers
2k views

Changing Motor Mounts

My 2007 Ford Focus ZX3 SES (65k miles ) has a vibration at all engine speeds. Other research has led to a high probability that this is from worn out motor mounts. I have read after market ...
3
votes
2answers
156 views

Where can I buy the 2005 Mazda 3s 2.3L oxygen sensor plug?

I bought an oxygen sensor with the wrong plug. I wonder were could I buy a plug like the one on my car in order to connect the oxygen sensor properly? This is an image of the plug on my car. Does ...
4
votes
2answers
176 views

vanagon lurches forward, won't accelerate past 20mph or so

I have a manual 1982 diesel VW Vanagon with a 1996 Passat TDI engine in it. This morning (low 40s temp), accelerating up a hill, heard a hissing sound in left rear. Check tires, no problems. Able ...
2
votes
1answer
738 views

Oil in coolant none in oil

I have a 2003 F150 with a 5.4 engine. It started running rough and I noticed oil in my coolant. I checked the dipstick and it is clean. I was just a little low so I added oil. When I removed the oil ...
1
vote
1answer
142 views

Idle sometimes too high (BMWM50B25TU)

Yesterday I had to drive a lot and after 100 miles I noticed that the idle won't go below 1500 rpm (should be 600) on my 1993 BMW 525i (euro model), except when I drove slowly in a high gear. This ...
2
votes
1answer
308 views

High pitched noise from engine unless brakes engaged

I'm driving a manual 96 Toytota T100, and recently the engine started making a high pitched, almost inaudible whine. Some things I've loosely figured out: It always stops when the brakes are ...
2
votes
3answers
569 views

VW Jetta II - engine misfires when climbing a hill

This is a VW Jetta made in 1984 with 1.6L petrol engine (code "EZ"). It starts OK (though if it has been a wile since last start, it takes some cranking to start the engine), but when climbing a hill, ...
16
votes
4answers
25k views

Driving in second gear at 65+ mph

I accidentally drove my 2000 Grand Marquis on second gear on the highway. I was going 65 for like 5 minutes and tried to get it to 70mph but the car was shaking, when I realized I put it into regular ...
4
votes
2answers
989 views

OVERHEATING 07 grand prix

My car has been overheating bad I took it to auto zone and hooked it up to the check engine thing and they said it was getting to 207 withing 10 secounds. It get hot fast and my heat doesnt work ...
1
vote
3answers
2k views

How do I determine if my Toyota Camry 1994 LE has a 5S-FE or 1MZ-FE engine?

My car: Toyota Camry 1994 LE, 4 cyl, 4 door sedan. What is the type of the engine?
1
vote
0answers
30 views

New car should run slow for better mileage - Myth or reality? [duplicate]

I just bought a Ford Ecosport and it has been only hours old. The dealer told me to drive the car at as slow speed as possible for the first 3 months (not more than 80 kmph) although my car can easily ...
1
vote
2answers
3k views

Lower quality oil vs high quality oil [closed]

tl;dr Which is best? Buying high-quality, longer-lasting, but more expensive oils and changing oil less frequently or buying lower-quality oil but changing more frequently? As I'm trying to find my ...
1
vote
1answer
247 views

Mean Piston Speed in Turbocharged Vs. Naturally Aspirated Engines

Does anyone know why the mean piston speed might be lower in the average turbo gasoline engine compared to the average naturally aspirated engine? Scratching my head to figure this out but no luck so ...
1
vote
1answer
94 views

Overflow tank's lid has been opened for a long time

I've just found that overflow tank's lid has been opened by itself. I dont know how long maybe four months since I bought it. Coolant level is now above the full mark. Does it cause any damage to the ...
17
votes
11answers
140k views

What happens if a single spark plug unexpectedly goes down in a multi-cylinder engine?

AFAIK vehicle manuals say owner must replace spark plugs every N miles. Suppose he fails to do so and a single spark plug unexpectedly dies in an engine with multiple cylinders right in a freeway. ...
6
votes
2answers
3k views

Really high idle after tightening spark plugs

I had a very nasty tick in my engine after doing a bunch of work to it, I just redid my chain tensioner which went a long way to fixing it, then I found that spark plugs could cause a tick, so I ...
0
votes
1answer
102 views

Oil change: which is the best option? [closed]

I am a new driver and need to change oil. I have following options. Which one should I select? My car: Toyota Camry 1994 LE, 4 cyl, 127000 miles. NTB: $19.99 It includes following services: Tire ...
1
vote
1answer
966 views

Change in engine oil color just after oil change

I have changed my new Swift VDI car engine oil at 19344kms. Just after the oil change at 19344reading means car is not run even 100 feets i checked the oil and i found it very black in color and it ...
1
vote
1answer
175 views

Is a 1994 Jeep Wrangler engine reliable

Its gone 150000 KM (93,205 miles). Would its engine be reliable to last another couple of years? Should I be on the lookout for any noises the engine makes that signal trouble? Thanks
2
votes
1answer
157 views

CVT on 6 cylinder cars

The 2013 Honda Accord has both 4 cylinder and 6 cylinder cars, however, only the 4 cylinder cars have a continuously variable transmission (CVT). I was wondering... is there any particular reason for ...
3
votes
1answer
790 views

Low compression and will not ignite after broken camshaft pin and replaced head and gasket

My 95 Geo Metro Lsi 1.0L had a blown head gasket. I replaced the gasket and drove the car for approximately 120 miles before it started spitting and sputtering. Then it died just before I got home. I ...
-2
votes
3answers
1k views

What engine is more durable? 3 or 4 cylinder ? [closed]

I would like to know what engine would last longer and with less problems? A 3 or a 4 cylinder engine? Thanks. Alik.
3
votes
2answers
4k views

2006 Chevy Cobalt front end (strut mount?) noise

I have a 2006 Chevy Cobalt and since I bought the thing, the front suspension makes this horrible clunking noise every time I go over a bump. I don't know how to describe the noise other than it only ...
3
votes
2answers
775 views

Is incessantly revving an engine necessary for tuning?

I have a neighbor who revs his engine loudly over and over again, for anywhere from 15 or 20 minutes up to several hours at a time, several days a week, and has been doing this for over a year. It ...
1
vote
1answer
2k views

Buzzing Sound coming from Nissan Altima engine after accelerating

I have a really sharp buzzing sound coming from my 2006 Nissan Altima engine. The sound starts and stays around as soon as press the accelerator. Doesn't go away until I turn the car off. I know ...
2
votes
1answer
320 views

What are the functions of Finger Follower, Lash Caps & Lash Disks and Seat Inserts?

I have googled all teams, but do not understand well from the result Finger Followers? (I see many website talk about rocker arms, but what is finger follower? Are they for different types of engine ...
1
vote
2answers
640 views

Can an Idle Control Valve cause backfiring and can it be cleaned

I am pulling codes for my engine indicating a faulty idle control valve. The vehicle at idle seems to hunt jumping between about 800rpm and 1100rpm. It happens maybe every 20 seconds. If I accelerate ...
0
votes
0answers
32 views

Is there any disadvantage of shifting to Neutral at high speed? [duplicate]

I would like to confirm whether shifting the vehicle to Neutral while at high speed in order to stop the vehicle is bad or not in terms of fuel efficiency. I had a word with some of my collegues and ...
5
votes
2answers
99 views

Can a full teardown of my 318 TDS (1996 1.7 Gasoil) E36 engine have bad side effects?

I would like to get more acquainted with the engine of my car, learn mechanics, and also just clean the engine of accumulated dirt and grime. As such, I am considering tearing down the engine. For ...
1
vote
2answers
88 views

Purchasing a Used Car - Advice [closed]

I'm looking into purchasing my first vehicle. I have a friend who's really into buying/selling VW's and he has a Jetta from the early 2000's with 240 000 km on it that he insists is a great deal and ...
3
votes
1answer
2k views

Maxima (2002) MAF Sensor Failures

I have a 2002 Nissan Maxima that I've owned since 2003. I'm now on my sixth Mass Air Flow (MAF) sensor. What seems to wipe them out is hard acceleration (3/4 throttle - not so extreme as to induce ...
3
votes
1answer
258 views

Check engine light between 1300-1800 RPM

I have a 1995 gmc Sierra hd with the 6.5L turbo Diesel engine in it. I just recently bought it and when ever I hold around 1300-1800 rpm the check engine light comes on, when I take my foot off the ...