The clutch disengages the engine from the gearbox in a manual-transmission car, enabling the driver to change gear.

learn more… | top users | synonyms

17
votes
2answers
2k views

What does a flywheel do and what is it connected to?

I understand roughly how an engine works and that there is a crankshaft which is able to turn the flywheel using internal combustion. I have just realised that I have got absolutely no idea how the ...
10
votes
2answers
111 views

1982 Yamaha Virago - Several things are wrong and i'd like to repair myself

Several things have happened in the past couple days and I would like to know what could possibly be wrong before I take it all apart. Engine dies after letting off the throttle while on the road. ...
4
votes
2answers
167 views

Gear ratio from speed and rpm

http://stackoverflow.com/questions/30017271/obdii-determine-gear-given-speed-and-rpm Referring to the above link, one method to find the current gear ratio is to calculate Speed/rpm (The rpm is the ...
5
votes
2answers
150 views

Awful sound when coming to a stop even after brake pads and discs replaced

I have a Vauxhall zafira which I bought a year ago. I was told upon buying the vehicle that its pads and discs would need replacing soon so I changed them straight away (with genuine Vauxhall ones, ...
5
votes
2answers
127 views

What does “clutch grabs hard” mean?

I recently had an engine swap done and will pick it up soon. Mechanic swapped in a 6 puck competition clutch as well. Combined with a very light flywheel(same weight as I'm used to driving, 8 lb), it'...
7
votes
3answers
207 views

When stopping, should I put the transmission in neutral?

When I have to stop the car but I know that I will be moving again soon, on the red light for example, should I shift to neutral? When I was learning how to drive, my instructor said that there is no ...
3
votes
1answer
130 views

Top speed of my Bajaj Pulsar 135 is decreased after changing Clutch plate

I would like to know if my clutch plate can be the reason that my top speed is now lower. Top speed of my bike is 115. I drove my bike after the clutch plate replacement and the top speed is now 90- ...
5
votes
1answer
91 views

Clutch failure symptoms

What are the symptoms of a failing clutch? I have owned several cars with manual transmissions, but have never actually experienced a clutch failure. My intuition tells me to use a low gear and ...
3
votes
2answers
57 views

1996 ford courier 2.6 petrol duel cab

My clutch started sticking to the floor and then it went completely I've replaced the slave cylinder and bleed the clutch but it still seems to stick it got a little better after the bleed but after 5-...
1
vote
1answer
74 views

1980 Civic hatchback clutch won't engage but gears are felt

I am looking at buying a 1980 Civic hatchback but the clutch needs work. He says that you can feel the gears but it won't engage. Does that mean it needs a new clutch or transmission fluid?
1
vote
1answer
32 views

Do I need to replace clutch kit when refitting engine

My car engine was stripped by Renault under warranty and fixed, now they want me to pay for replacing the clutch as they feel it will go soon. My question is aren't they supposed to replace the clutch ...
1
vote
1answer
114 views

Can a faulty gearbox cause a clutch to wear?

I bought an Iveco Daily Van new back in February (10 months ago) and yesterday it broke down. The basic symptoms being that it wont engage into gear (the engine start fine but when you depress the ...
3
votes
1answer
47 views

Engine surges when depress accelerator past a certain point

I have a 2003 manual Nissan Almera S petrol 1.5L with only 75,000 miles on the clock. Today the engine has started to surge. If I depress the accelerator pedal more than approx. ½ inch - 1 inch, the ...
4
votes
1answer
72 views

Does putting vehicle in neutral at slope cause clutch plate spoilage?

I am having a Hero Honda Passion 2002 model motorcycle. I have a doubt regarding clutch and Neutral functionality. I have observed that most of the time in our city the roads have ups and down so ...
0
votes
2answers
91 views

What is happens to the brakes when an automatic drives below the speed for 1st gear with no added gas?

In a manual transmission car, when a driver wants to go below the speed the car travels at in first gear with no added gas using the gas pedal, my first driving instructor told me you ease off the ...
1
vote
2answers
171 views

Is it normal for the car to vibrate on the BITE when no gas is given in a manual transmission?

Is it normal for the car to vibrate on the biting point when no gas is given? When I give enough gas it seems fine but not when I very slowly release the clutch and hold at the biting point. Is this ...
2
votes
1answer
102 views

Why does my gear-shift lever seem to freeze in position sometimes?

My 1996 Ford Escort shift lever sometimes won't move into 1st gear position unless I turn the motor off, then start in that gear. It also, sometimes, won't move into any of the gear positions and I ...
3
votes
1answer
70 views

What is rev matching, and how do you do it correctly? [closed]

I understand that not doing this properly will destroy your transmission/synchros. What's the proper way to do it? I think I'm doing it right, but I've found most people's descriptions to be vague and ...
4
votes
1answer
104 views

what damage or extra wear (if any) is caused by turning over the engine while in gear (manual transmission)?

While newer cars never allow you to turn over the engine without the clutch depressed, in some older cars, if you do leave the transmission in gear, do not depress the clutch and turn the key, the car ...
4
votes
2answers
339 views

Unable to move in first and second gear in VW Polo

I am facing a problem in first and 2nd gear in my VW Polo diesel car. I am unable to move car in these gears, I tried it so many times. So for the time being I used 3rd gear to move the car & ...
16
votes
2answers
376 views

Engine noise / rattle when clutch is fully pressed [BMW 320d e46, manual]

I have a strange noise, like a rattling/stomping sound at idle, when pressing the clutch pedal. The clutch and the flywheel (DMF), were both changed with new parts. Except for that sound, the car ...
2
votes
1answer
46 views

Honda City vTec Slow Start

I have a Honda City 2005 vTec Manual Transmission Car, which will be due for servicing in another 1000KM. I am not well used to driving manual car and I face a lot of traffic everyday going and ...
2
votes
1answer
471 views

Why does my clutch “bounce”?

'97 Jeep Wrangler 4.0L, though I doubt the phenomenon is that specific. Sometimes, when I accelerate normally from a light or a stop sign (at the same rate as everyone around me) while keeping the ...
4
votes
1answer
221 views

95 Honda Del Sol Si manual won't go into gear when idle > 1000 rpm

I have been racking my brains over this very odd issue. Here is the problem. I recently got this car (95 Honda Del Sol Si 5 spd 160k miles) as a second car. The previous owner claimed that the clutch ...
3
votes
1answer
146 views

Does it cause wear on a clutch if it's partially engaged, but in neutral?

Just wondering if it causes any wear engaging/disengaging the clutch if you're in neutral.
1
vote
1answer
98 views

Downshifting to a stop- wear and tear?

I drive a Mustang GT, and I love the deceleration "pop" that you get when the engine revs climb without the accelerator being pressed, so as one might surmise, I tend to downshift to a stop at lights ...
17
votes
2answers
1k views

Does resting your foot on the clutch wear it out?

Does driving with your foot always resting on the clutch (not pushing) generally wear it down?
3
votes
1answer
160 views

noise at idle after replacing new clutch

Some noise is coming when the car is running at idle. The noise goes away when the clutch pedal pressed. This is happening immediately after replacing the clutch and clutch release bearing. what ...
1
vote
1answer
139 views

My clutch cable has been stretched and since tightened to fix it. Should I replace it?

I have a VW Polo 2001, 37000 miles, manual transmission, 1.4 engine, with a replaced clutch and timing belt, and a reconditioned gearbox. I didn't face any resistance in my pedal last night. The ...
4
votes
1answer
405 views

golf mk1 1990 clutch problem

I was driving my golf and the clutch pedal was creaking a bit but working ok, suddenly i pushed the pedal down it clicked and went to the floor i got recovered and the mechanic showed me the cable ...
6
votes
1answer
113 views

Clutch gone on my Leon Cupra after less than 2 months of ownership

I bought a Leon Cupra TSI 280 less than 2 months ago and done 1750 miles and the clutch has gone! I took it back to them with around 900 miles on and less than a month old with the problem as the ...
4
votes
2answers
4k views

Is vibration for a new clutch job normal?

I have a 2005 Toyota Camry (Manual Transmission). My clutch died on me last week - couldn't accelerate. I had the clutch replaced at a local mechanic. Now when I start the car off in first gear the ...
7
votes
2answers
895 views

Music stops playing when pressing the clutch down

In my car the music of my car radio stops playing almost every time when I press the clutch. It does not always stop, but probably in 80% of the cases. It never stops when I do not press the clutch. ...
7
votes
1answer
88 views

Clutch pulls in too easy after reassebling the clutch basket, what did I did wrong?

I have a 1982 Kawasaki KZ550C LTD. When I got the bike one of the bearings on the starter assembly was worn out and would slip. So I pulled the engine and had to tear it down in order to get to the ...
4
votes
1answer
69 views

After long journeys, gear slips in 5th, but not into neutral

This is a follow up to another question I asked. I've managed to get some video of it happening this time. It started happening after travelling for about 2 hours. I was experiencing heavy traffic. ...
2
votes
1answer
106 views

I get a blast of hot air during stop start driving. What could cause this?

I am a learner driver with a Hyundai i20. Every now and then when I stop and then go and switch to second gear I get a blast of heat at my legs and feet. The aircon is off and its a diesel. I am ...
2
votes
1answer
666 views

5th gear slipping of 5th gear at 3000 revs, but not into neutral

I'm planning to take my car to Mr Clutch on soon, but I wanted to see what every else's impression is of my car's problems. Last night I was driving along the motorway, accelerating to 70mph, when ...
5
votes
1answer
57 views

ok still not working right 95 Geo Tracker clutch

IRT this question ... At first I thought I had it good (the clutch) now it idles too high and the peddle won't come all the way back up. I can't put into first or second and I'm at a loss not sure how ...
3
votes
3answers
232 views

1995 Geo Tracker - Shifting Issues

I just put in transmission fluid and replaced the clutch cable. I've re-adjusted it (not that I have much if a clue on what I'm doing). It did good for a few days then I had a problem with 2nd gear ...
3
votes
2answers
1k views

Jeep JK Clutch vs Slave Cylinder

I have two different opinions on whether a clutch should be replaced when a slave cylinder fails: It WILL coat the clutch plate and will wear the clutch plate. The clutch plate MUST be replaced. $...
4
votes
1answer
34 views

Do I have to change the chaincase lubricant when adjusting the clutch during routine maintenance? 2015 HD Road King

I am completely new to motorcycle maintenance, but need to adjust my clutch. I have watched a demonstration video for a similar model (I think) - but couldn't find an exact match. Since I will be ...
7
votes
2answers
3k views

how a clutch works

I understand how a clutch can separate the flywheel from the clutch disk so that power is disconnected from the engine but how when that happens, the input shaft (along with the countershaft) stops ...
3
votes
3answers
449 views

Safe engine braking in automatic cars

When I was learning to drive, I took my lessons in a manual car. On one of the lessons I was performing a reversing maneuver and I controlled the car on both the clutch and the brake pedal... which I ...
2
votes
2answers
377 views

Manual Transmission Grinding Occasionally Shifting Into Fifth

I have a 99 Nissan Almera which occasionally grinds / doesn't engage when I try and put it into fifth gear. Not often, but maybe once or twice a day. I'm not sure if the problem is operator related, ...
3
votes
1answer
172 views

Is the knock an early sign of Dual Mass Flywheel problem. Main dealer says acceptable noise?

Ford Mondeo 2012 1.6 TDCi DPF SS 115. At 15,500 mls I am experiencing a knocking sound when raising the clutch pedal but only when the engine is running. The sound outside the car is really loud. It ...
4
votes
4answers
7k views

My mechanic asks me to press the clutch pedal while starting engine during winter

Does he mean to say that my engine doesn't disengage completely when the clutch is released, if that's the case then my clutch would wear out. Am I correct in thinking so?
3
votes
1answer
5k views

Craftsman lawn mower won't move

My son was cutting the grass the other day and stopped. After he stopped the lawn mower wouldn't go into gear. 1-6 or reverse, nothing. The blade still engages and turns however it seems to have an ...
1
vote
1answer
248 views

Reverse grinds and transmission won't lock into 1st gear [closed]

I have a 2001 Ford Escort ZX2 with manual transmission. It has had noticeable play in the shifter but had no problems until suddenly the clutch just would not engage after being pushed down completely....
5
votes
1answer
541 views

2002 Peugeot 206 Clutch won't disengage

When the car is running, I am no longer able to put it into any gear; like it would happen when you're not holding the clutch, so that is one of the reasons why I think there is something wrong with ...
4
votes
0answers
126 views

MG ZS 180 - overheating clutch

So I got a new (well 2004) MG SZ 180 the other day and it turns out there is a small issue with it. After using the clutch in stop/start traffic, changing gear gets harder and harder until I end up ...