Questions relating to any part of the vehicle braking system

learn more… | top users | synonyms

6
votes
3answers
139 views

Wheel change/balance leading to continuous braking

So I go to get my wheels changed and balanced and I leave with the driver side rim heating up unnaturally even after driving just a few miles. The car stops unusually quickly. It's quite clear that ...
1
vote
2answers
70 views

What is the cause of a soft brake pedal after bleeding?

I installed new rear calipers on both sides, new pads on all four wheels, and bled brakes with engine off, then with engine on, two times each. The pedal is hard when the engine is off and extremely ...
5
votes
1answer
1k views

Reading ABS diagnostic codes on a Volvo 940

I want to read any fault codes stored in my 1992 Volvo 940's ABS module. I've tried the procedure described in the popular 700/900 series FAQ without success. That procedure involves plugging the ...
3
votes
1answer
30 views

Rumbling sound from brakes in Lexus

My family has a 2013 Lexus RX 350. Today was the first time we noticed a low rumbling sound coming from the brakes when they are pushed. We've had a maintenance check with no issues a month ago. Any ...
2
votes
1answer
52 views

Brake pedal is hard to push even after new brakes

The brake pedal in my 06 Pontiac g6 seems harder to push than normal. Since the issue started, I've had the rear rotors and pads replaced, along with a control arm. For the first 10-15 minutes of city ...
2
votes
1answer
41 views

2001 Ford F150 howling when braking with trailer

I have a 2001 Ford F150 Lariat with the 4.6L V8 Engine. Sometimes while I have my trailer hooked up I get a tremendous howling while braking. Almost so loud you can't hear anything else in the cab. ...
2
votes
1answer
943 views

Front right 'squeals' when turning

Hi I have an incredibly frustrating noise coming from the front right of the car. It only occured after replacing pads and rotors. It occurs when turning left (weight on right) and occasionally going ...
1
vote
1answer
263 views

How do 99 chevy tracker rear brakes self adjust?

I adjusted the brake shoes a bit after I installed them, but do they now adjust on their own as they are used, or how do I get them to adjust?
0
votes
1answer
11 views

2010 town & country

I changed the front brakes & rotors on my 2010 Chrysler Town and Country. Now the front brakes will not release after driving it for awhile. They both heat up and sound like they are grinding ...
3
votes
0answers
219 views

Front wheel scraping noise

I have some weird scraping/rubbing noise in my right front wheel. I I hear it regardless of weather i brake or not, and the slower i go the more low pitched and grindy it sounds. It continues to ...
3
votes
0answers
23 views

Trying to order a part, shows up brake knuckle spindle assembly, but all are used for 98 civic?

I'm trying to order the hub assembly and brake knuckle spindle assembly for a 98 Honda Civic so that I don't have to do any press work with the bearings. On other vehicles the parts can be bought new ...
2
votes
0answers
19 views

Brake fluid leak after recent brake line replacement

I have a 2001 Mazda 626 which had its brake service light come on some time back, and the brakes became spongy and ceased functioning properly. I took it to my mechanic and he replaced the brake ...
2
votes
0answers
35 views

While driving, my handbrake gets automatically engaged (maybe)

I own a Hyundai Accent. I drove it for around 800kms yesterday. All was fine until I was close to my house. I heard a noise coming from the rear wheel as if the wheel was stuck. After a while, ...
2
votes
0answers
54 views

Continual Brake Issues on a 2002 Kia Spectra

I have a 2002 Kia Spectra. We have replaced the rotors 3 times, but prior to doing that we were having problems with our back brakes. The mechanic we were going to said nothing was wrong with the back ...
2
votes
0answers
23 views

Tire pressure sensor doesn't read

I work on several makes and models, and found that after replacing brake pads that the "low tire pressure" warning comes on as a sensor fault. Is there something I'm hitting that causes this? How can ...
2
votes
0answers
47 views

02 chevy cavalier skidding when braking

So I've done a lot of under body work on my 02 Chevy cavalier z24, the most recent being the sway bar, rack and pinion and last week the struts. Around the time we did either the sway bar or the rack ...
1
vote
0answers
6 views

2006 Pontiac g6 rough idle and intermittent spongy brake and starting issue

I have a 2006 Pontiac G6 with 160k on the 3.5 motor. Around 155k the brake pedal went hard and spongy. Also, about 1 in every 40-50 times I start it cold, the starter will turn without a successful ...
1
vote
0answers
47 views

Long brake pedal travel after replacing pads

I recently installed new brake pads. They haven't been bedded in yet and I don't intend to use them for daily driving. The pressure feedback from my brake pedal progressively increases as I apply ...
1
vote
0answers
42 views

Clutch drops to the floor when I start to apply the brakes

Why does my clutch drop to the floor of my 93 ford escort as soon as I start to apply pressure on my brakes. I already changed out my master cylinder and bled the brakes. Could it have anything to do ...
0
votes
0answers
28 views

Nothing comes out when bleeding rear brakes

94 Ford Aerostar Pedal is hard when not running. Goes to the floor when it is. Bled front ok. Nothing comes out when bleeding rear brakes. Tried several times, still nothing, What's wrong?
0
votes
0answers
37 views

Why does the brake on a 2000 Sienna click and squeak?

When I depress the brake pedal on a 2000 Toyota Sienna, every time the pedal reaches near the halfway mark, there is a discernible click. As the vehicle approaches a stop and I feather the brakes, ...
-1
votes
0answers
17 views

Brakes, pads, and calipers sticking after replacement

2006 Honda Element. I replaced brakes and calipers. They are still sticking and getting hot. What should I try next? Should I change back brakes?