Motor Vehicle Maintenance & Repair Stack Exchange is a question and answer site for mechanics and DIY enthusiast owners of cars, trucks, and motorcycles. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

How do I change the oil on my motorcycle? I can see where to check the level, but how do I drain it? It's a Honda CB400 2011 model

share|improve this question
1  
you need to be a little more specific: what type of motorcycle are you asking about? – Bob Cross May 30 '11 at 18:44
up vote 4 down vote accepted

The bottom of the oil pan

All of the CB series of motorcycles use a wet sump lubrication system and have an oil pan.

On your model specifically it is in the center of the oil pain and just a bit obstructed by the exhaust pipes. You will need an extension and a 17mm socket to get to the drain bolt.

The drain bolt has a magnet, so you can check to see if there is any metal on magnet when you change the oil. A sign there may be issues if you do.

Torque Speck for Drain Bolt

45Nm, or 33ft-lbs.

share|improve this answer

If you cannot find it anywhere, look at the bottom of the engine. Remember, drain plug is usually at the lowest point of the pan. Look for a hexagonal bolt, and it should be it. Ensure to not confuse it with you transmission though.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.