There is a lot of conflicting information whether slotted or drilled rotors perform better than blank rotors. For a street car that will do the occasional track day, which type of rotor should I get?
I would recommend you get slotted, but not drilled rotors. Regular rotors will work fine for typical track use. What is more important is the type of brake pad you purchase to go with your disks. The reason I suggest not getting drilled rotors is, they have a tendency to crack at the holes due to stress risers. They will not last as long as you'd like them too and will not give you much more performance than just the slotted ones will. The slotted rotors will provide space for allowing brake dust and such to be brought away from the pad, which keeps it clean and better intact with the rotor.
Blank rotors have a larger area in contact with the pads than slotted or drilled rotors. Therefore they provide better braking at the same temperature.
To cool the rotor, manufacturers use a vented rotor, not a cross-drilled or slotted rotor.
cross-drilling puts holes perpendicular to the flow of air - they have no cooling effect whilst the wheel is turning.
A cross-drilled or slotted rotor has less thermal mass and thus heats up faster and fades faster.
So far as I know, with modern rotor and pad materials, dust removal is not a significant factor affecting brake performance.
I can find no scientific evidence that the resin in overheated pads outgasses faster than gas is removed by rotation. (e.g. see cross-drilled rotors myth)
What is used by people for whom performance is more important than looks?
Blank rotors provide the best braking during regular operation. Slotted rotors are such because they improve performance during heavy and prolonged braking. If it were my car, I'd rather spend the money on high-heat racing pads and race-grade brake fluid (which boils at a much higher temperature).
Other things to consider are steel braided hoses and modifications to your front bumper to allow lots and lots (and lots!) of extra air to flow over your brakes to keep them cool. If you hate your car's looks enough, you could also modify the rear body panels for the same purpose. This is usually accomplished in conjunction with light alloy wheels with the thinnest spokes possible. And remember: trail-braking and heal-and-toe are your friends. Trail-braking allows you to let up off full braking earlier and heal-and-toe shifting allows the gearbox to slow you down a bit, while also putting you in the right gear for the exit. These two techniques combined will simultaneously be better for your brakes AND improve your lap times.
I use bendix CT(ceramic)stealth advanced technology disc pads and slotted rotors to suit.You can use your existing rotors but it is best to upgrade to ceramic compatible rotors.Ceramic pads shed very little dust as opposed to metal content pads so your mags will stay cleaner longer