Motor Vehicle Maintenance & Repair Stack Exchange is a question and answer site for mechanics and DIY enthusiast owners of cars, trucks, and motorcycles. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I ride a Honda Rebel 250 motorcycle and over the past few days I find that the bike is losing power when accelerating fast.

When I twist the throttle to accelerate quickly (in any gear) I hear the engine sound increasing in pitch by a lot more than I'm used to hearing, but the motorcycle doesn't seem to respond and performance is very poor. If I then twist it back to a position of slow acceleration, the engine noise returns to I'm used to hearing (still the accelerating noise but a lot lower pitch) and the performance also seems to be appropriate to that level of acceleration.

What could be wrong with the motorcycle?

share|improve this question
I am having the same issue, I have a 125cc ajs regal raptor, and if I am accelerating in well its mainly 4th gear and going up a slight incline it'll lose power and even if I knock it down into 3rd it'll struggle, but I think I may have a block in the air fliter or in the carbs, so it needs sorting, just something to think about next time you have a similer problem mate – user3632 Sep 3 '13 at 20:25
@AdamRobinson the key here is that the RPMs increase without the motorcycle accelerating. This is the hallmark of a slipping clutch, and could not be explained by blocked air filter or carb issues. – mac Sep 4 '13 at 15:49
up vote 15 down vote accepted

My knowledge of motorcycles is limited so I could be wrong, but it sounds like the clutch is slipping.

share|improve this answer
I've had a mechanic look into it and yes, the problem was the clutch slipping. – Paulo Pinto May 16 '11 at 21:17
Did he say why? Is it just worn out, or something to do with the oil? – theUg May 25 '12 at 4:20
The clutch plates were worn out. – Paulo Pinto Nov 15 '12 at 17:34
Do you tend to ride with your hand on the clutch lever? if theres no play on the clutch lever you could accidentally be causing wear by keeping it slightly "on" – Mauro Mar 8 '13 at 8:18

I realize this question has been answered, but keep in mind that any carbureted engine can bog down under throttle and cause a lack of acceleration.

If it can be backed off and regain acceleration, then I'd suggest carb tuning. If the engine revs, but no acceleration then it's a slipping clutch.

share|improve this answer

protected by Zaid Aug 26 '15 at 15:04

Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site.

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.