Take the 2-minute tour ×
Motor Vehicle Maintenance & Repair Stack Exchange is a question and answer site for mechanics and DIY enthusiast owners of cars, trucks, and motorcycles. It's 100% free, no registration required.

I want to remove a dealer's sticker from my car. The sticker is on a painted surface. What is the best way to do it?

Could I remove pinstripe decals in the same way?

share|improve this question
    
Painted metal or painted plastic? Big difference. –  Mark Johnson Apr 12 '12 at 5:47
    
I was asking about painted metal, but I'd like to know about plastic surfaces, too. –  William Cline Apr 12 '12 at 14:58

2 Answers 2

up vote 8 down vote accepted
  1. Clean the stickers and the immediate surroundings using a strong solution of car all purpose cleaner and water or car shampoo (without wax!) and water.
  2. Warm the sticker with a hairdryer or a hot air gun to about 30 degrees Celcius.
  3. Start peeling of the sticker gently, you might want to use some thing plastic tool like a plastic putty knife of an ATM card or something. Keep using the hairdryer to keep the glue warm.
  4. When the sticker is completely gone, use the all purpose cleaner to remove the glue and dirt left on your car. Do it gently! Unless you want scratches, of course. This will remove any dirt and glue left on your car and is a important step. If you forget this step the borders of the removed sticker will remain visible for weeks or, depending on the paint and the quality of the stickers, for months or even forever.
  5. Use your garden hose to rinse your car, don't use a pressure washer.
  6. Wash your car using the regular 2-bucket method.
  7. Wax the car using a heavy duty wax. (Thanks NoCarrier)
share|improve this answer
    
don't forget to put a new coat of wax on top of the paint where the pinstripe used to be –  NoCarrier Apr 4 '11 at 7:28
    
Thank you for the detailed answer. I plan to use 3M Adhesive Cleaner to clear away the residue once the sticker is off (before washing and waxing), and perhaps to help loosen up the glue at the beginning as well. –  William Cline Apr 6 '11 at 21:32

I usually just use a Steam Jenny basically a hot water pressure washer, starting at one edge working my way across the sticker. If you don't have access to that you can use a heat gun or hair drier to heat up the sticker and peal off the sticker starting at one edge keeping it at a 90 degree angle while doing so. You can also use a plastic putty knife or plastic razor blade. Take you time and pull with a steady even pressure.

plastic putty knife image

Another thing that works very well is a pinstripe eraser wheel. We use these when we are removing graphics from our emergency vehicles as part of the decommissioning process.

enter image description here

3M Stripe Off Wheel 07498

You can see a video here of a similar product.

share|improve this answer
    
Will that work on a plastic bumper? –  Mark Johnson Apr 12 '12 at 5:48
    
@MarkJohnson Yes this method will work on plastic bumpers as well –  Larry Jul 2 '12 at 17:39
    
I've been trying to re-find that wheel for years. –  Bob Cross Jul 3 '12 at 10:13
    
@BobCross They are AWESOME, expensive but worth it. We have a ton of graphics on the sides of our ambulances and quick response vehicles and it makes taking them off much much easier. –  Larry Jul 3 '12 at 14:22

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.